Genuine Land Rover Parts

Retaining Clip is a fastening clip used in the radiator grille and front bumper assembly. It secures the grille and front bumper trim components t...

Coolant Hose - Engine to Radiator, Upper is part of the engine cooling system pipes and hoses. It forms the upper leg of the main coolant circuit,...

Coolant Hose forms part of the charge air cooler coolant circuit on the 5.0L supercharged V8 petrol engine (AJ133). This engine uses a water-coole...

Front Brake Caliper Attachment Kit supplying the pad-retaining and caliper attachment hardware that secures the brake pads in the front caliper bod...

Fuel Injector Pressure Sensor - high-pressure fuel rail sensor in the direct-injection fuel supply circuit. It measures the fuel pressure in the i...

Wiper Arm - front windscreen wiper arm for the passenger side on left-hand drive vehicles, part of the front wash/wipe system. The arm locates on ...

Fuel Pump and Sender - in-tank fuel pump and level sender unit, mounted in the fuel tank as part of the fuel delivery assembly. The pump lifts fue...

Exterior mirror motor - left-hand side glass adjustment motor within the door mirror head. The motor sits behind the mirror glass and drives the g...

Inlet Manifold Air Duct is the moulded elbow that routes charge air into the inlet manifold on the 3.6 litre V8 32V DOHC Td8 diesel engine. It joi...

Spark Plug Aperture Gasket seals the spark plug aperture in the cylinder head cover on the left hand cylinder bank. It closes the joint between th...

Air Suspension Control Module is the electronic control unit of the air suspension system. It interprets the ride height sensor signals and the dr...

Radiator Hose - Top for the 5.0L AJ133 V8 petrol engine, part of the cooling system pipes and hoses. The top hose carries hot coolant from the eng...

Transmission oil cooler for the automatic gearbox cooling circuit. Automatic transmission fluid is routed out of the gearbox, through the cooler co...

Fuel Injector Seal - Lower is the lower sealing ring fitted to the fuel injector, within the fuel injector and pipe assembly of the 4.4L V8 (AJ) pe...

Door Latch - Front - LH - latch assembly for the left-hand front door, mounted in the shut face of the door and working against the striker on the ...

Fuel Injector Seal - Upper - sealing ring for the upper position on the fuel injector, part of the fuel injectors and pipes group on the V8 petrol ...

Vacuum Pump Seal - sealing ring between the engine-driven vacuum pump and its mounting face on the engine, forming part of the brake servo vacuum c...

Accessory Drive Belt - ribbed serpentine belt for the front-end accessory drive of the 5.0L naturally aspirated V8 petrol engine. Driven from the ...

Oil Level Sensor - electronic engine oil level sensor mounted in the wall of the sump, forming part of the engine lubrication monitoring circuit. ...

Fuel pressure sensor for the high-pressure direct injection circuit of the 5.0L V8 petrol engine (AJ133), naturally aspirated and supercharged. Mo...

Lower chain guide for the auxiliary drive chain, part of the timing gear assembly on the 5.0L V8 petrol engine (AJ133). The guide runs against the...

Rear wiper arm with integrated washer jet, part of the tailgate wash/wipe system. The arm mounts on the splined rear wiper motor spindle and carri...

Tube - Drain

Front timing cover - the lower centre cover that closes the front face of the cylinder block over the timing chain drive. It carries the crankshaf...

O-Ring seals the variable valve timing (VVT) solenoid within the timing gear and sprocket assembly. It maintains an oil-tight joint between the VV...

Vacuum Hose running from the inlet manifold to the symposer on supercharged petrol engines. The symposer is an intake resonator that channels indu...

Cable - Hood Control

Inlet Manifold Gasket for the left-hand cylinder bank of the 5.0 litre V8 petrol engine (AJ133). It seals the joint between the inlet manifold and ...

Inlet Manifold Gasket - 5.0 V8 - RH seals the inlet manifold to the cylinder head on the right-hand bank of the 5.0 litre V8 petrol (AJ133) engine,...

Timing Tensioner Screw - M8 x 45mm is the fastener that secures the chain tensioner within the timing gear assembly of the 5.0 litre V8 petrol (AJ1...

Radiator Hose - lower radiator hose in the engine cooling circuit of the 5.0 litre V8 petrol (AJ133) engine, naturally aspirated and supercharged. ...

Coolant Hose - Bleed is part of the engine cooling and coolant recovery circuit on the 5.0 litre V8 petrol (AJ133) engine. The bleed hose carries ...

Coolant Hose for the expansion reservoir overflow line on the supercharged 5.0L V8 petrol engine (AJ133). It connects to the coolant expansion res...

Coolant Hose from the engine cooling circuit of the naturally aspirated 5.0L V8 petrol engine (AJ133). This is the upper hose in the engine-to-rad...

Valve Cover Stud and Sleeve from the cylinder head cover fixings of the petrol V8 and supercharged V6 engines. The stud threads into the cylinder ...

Valve Cover Screw and Sleeve from the cylinder head cover fixings of the petrol V8 and supercharged V6 engines. The screw secures the camshaft (va...

Intercooler to Inlet Manifold Gasket from the charge air induction system of the supercharged 5.0L V8 petrol engine (AJ133). The supercharger and ...

Secondary Drive Belt from the front end accessory drive, 1444 mm in length and eight-ribbed. It runs from the crankshaft pulley over the tensioner...

Pulley - Fan

Spark Plug Aperture Gasket for the right-hand camshaft cover, sealing the spark plug well against oil ingress. The camshaft cover carries a tube f...

Rear Crankshaft Seal and Retainer - the rear main oil seal supplied complete with its retainer housing, sealing the crankcase at the transmission e...

O-Ring for the oil pump outlet tube, sealing the pressurised feed within the oil pump, sump and filter assembly. The outlet tube carries oil from ...