for Discounts / VAT
for Discounts & Correct VAT
Genuine, OEM, and quality aftermarket Land Rover Defender parts for the classic 90, 110, and 130 (1983-2016) and the new Defender L663 (2020-present). Every component is sourced for verified fitment by VIN and shipped from our Netherlands warehouse as part of our wider Land Rover parts catalogue.
Timing Tensioner Screw - M8 x 45mm is the fastener that secures the chain tensioner within the timing gear assembly of the 5.0 litre V8 petrol (AJ1...
View full detailsRear Brake Disc - a vented disc from the rear brake disc and caliper assembly. The disc is mounted on the rear hub behind the road wheel and rotat...
View full detailsPrimary Timing Chain Tensioner from the timing drive assembly at the front of the 2.0L four-cylinder AJ200 / AJ20P4 engine. The tensioner bears ag...
View full detailsHead Gasket for the right-hand cylinder bank of the 5.0L V8 AJ133 petrol engine. It seals the cylinder head to the engine block, containing combust...
View full detailsTiming Chain - Secondary, Upper is part of the camshaft drive of the 2.0L Ingenium four-cylinder petrol engine (AJ200 / AJ20P4), including plug-in ...
View full detailsGasket - Oil Cooler seals the engine oil cooler to its mounting face, within the Oil Cooler and Filter assembly. It maintains the integrity of the...
View full detailsO-Ring for the oil pump outlet tube, sealing the pressurised feed within the oil pump, sump and filter assembly. The outlet tube carries oil from ...
View full detailsDrive Fastener - black plastic drive-in retaining clip used to secure body mouldings, trim panels and interior finishers to their mounting panels. ...
View full detailsTiming Gear Bolt from the engine timing drive, securing the camshaft sprocket and variable camshaft timing adjuster to the camshaft. It provides t...
View full detailsCrankshaft Position Sensor for V6 and V8 petrol engines. The sensor reads the crankshaft trigger wheel to report rotational position and speed to ...
View full detailsFuel Crossover Tube is the high-pressure fuel crossover pipe within the fuel injection system. It carries high-pressure fuel across the engine bet...
View full detailsScrew, M6 x 38mm, from the timing gear assembly - timing chains, tensioners and guides, and the auxiliary drive. It retains the chain guide in pos...
View full detailsBrake Pad Set - Rear - friction pad set for the rear brake discs and calipers assembly, supplied as a complete axle set covering both rear wheels. ...
View full detailsWater Manifold Gasket for the engine cooling and heater circuit - it seals the water manifold tube where it leaves the cylinder block and feeds the...
View full detailsCrankcase Breather Tube - a hose in the crankcase emission control (crankcase ventilation) system on petrol engines. The tube routes blow-by gases...
View full detailsPin, 6 x 36mm, from the timing gear and auxiliary drive assembly of the 5.0L AJ133 V8 petrol engine. It serves as the guide pin for the auxiliary ...
View full detailsExhaust Gas Temperature Sensor for the exhaust aftertreatment system. Fitted at the diesel particulate filter, it measures exhaust gas temperature ...
View full detailsCrankshaft Front Oil Seal for the timing gear cover, sealing the crankshaft nose where it passes out through the front cover. It runs on the crank...
View full detailsHi-Lift Jack and Spade Mounting Kit - roof rack mounts that carry a Hi-Lift jack and a long-handled spade on the rack platform. The mounts clamp i...
View full detailsTiming Chain - Secondary, Upper is part of the camshaft drive of the 2.0L Ingenium four-cylinder turbo diesel (AJ200D / AJ20D4). It runs in the up...
View full detailsKnock Sensor for the engine management system, mounted on the rear face of the cylinder block. Petrol applications only - Ingenium AJ200P, AJ20P an...
View full detailsBrake Pad Set - Rear - friction pad axle set for the rear disc brake assembly. The pads locate in the rear caliper carriers and clamp against the ...
View full detailsPulley - Fan
Fuel Pressure and Temperature Sensor for petrol fuel-injection systems. The combined sensor measures fuel rail pressure and fuel temperature and r...
View full detailsTiming Chain for the timing drive of the 2.0L Ingenium four-cylinder diesel engine (AJ200D / AJ20D4). This is the lower, primary chain of the two-...
View full detailsCoolant Pump for the auxiliary fuel-fired pre-heater (parking heater) circuit. The electric pump circulates coolant through the fuel-fired heater ...
View full detailsGlow Plug Control Unit - the switching and control module of the diesel pre-heat system, wired between the battery supply and the glow plugs. The ...
View full detailsSunshade Set is a set of made-to-measure window blinds that fit over the rear side windows and the boot window of the vehicle. The shades attach u...
View full detailsTransmission Oil Cooler - part of the automatic gearbox cooling circuit, fitted to ZF 8-speed automatic transmissions. The cooler dissipates heat ...
View full detailsTyre Pressure Sensor - wheel-mounted pressure and temperature sensor for the Tyre Pressure Monitoring System (TPMS). Mounted at the valve position...
View full detailsHex Head Bolt - threaded fastener used at the engine mountings and at the front suspension strut mounting. Driven with a standard spanner or socke...
View full detailsRear Brake Disc - a vented disc from the rear brake disc and caliper assembly. The disc is mounted on the rear hub behind the road wheel and rotat...
View full detailsIntercooler to Inlet Manifold Gasket from the charge air induction system of the supercharged 5.0L V8 petrol engine (AJ133). The supercharger and ...
View full detailsSpring - Air Suspension
Rear Bumper Trim - chequer-plate style protection panel for the top face of the rear bumper. Covers the exposed upper bumper surface to protect it...
View full detailsIgnition Coil for the engine ignition system. It steps up battery voltage to the high voltage needed to fire the spark plug and is mounted directly...
View full detailsPiston assembly - piston for the AJ133 5.0L supercharged V8 petrol engine, in the standard (nominal production) bore size. The piston runs in the ...
View full detailsWind Deflector Set for a four-door body, covering the front and rear door windows. The set comprises four deflectors, one for each door. Each defl...
View full detailsFold Down Shelf - interior storage accessory mounted to the inside face of the rear door. It folds flat against the door when not in use and drops...
View full detailsBrake Pad Kit - Rear - friction pad axle set for the rear disc brake assembly. The pads locate in the rear caliper carriers and clamp against the ...
View full detailsBrake Pad Kit - Rear - friction pad axle set for the rear disc brake assembly. The pads locate in the rear caliper carriers and clamp against the ...
View full detailsBolt is a threaded fastener used in the air-conditioning and front-end accessory drive. It secures the air-conditioning condenser and compressor a...
View full detailsConnection - Water
Wheel Nut Set - set of twenty wheel nuts, sufficient for four five-stud road wheels. Each nut clamps the road wheel against the hub face on the wh...
View full detailsHeadlight DRL Repair Module restores the daytime running light function within the LED headlight unit. The module replaces the failed DRL circuitr...
View full detailsLocking Fuel Cap seals and secures the fuel filler neck on diesel applications. The lockable cap deters fuel theft and tampering while sealing the...
View full detailsTiming Chain - Lower is the lower (primary) chain of the timing drive on the 2.0L Ingenium four-cylinder petrol engine (AJ200 / AJ20P4, including t...
View full detailsBrake Pad Kit - Front - front axle set of disc brake pads for the 19-inch front brake disc and caliper installation. The pads are clamped against ...
View full detailsParts for the full Land Rover Defender range, from classic Defender 90, 110 and 130 models built between 1983 and 2016 to the new Defender L663 introduced in 2020. Genuine, OEM and aftermarket parts in EU stock. Use the collections below to shop by generation.
The Land Rover Defender name covers two distinct vehicle platforms that share a name but little else in terms of engineering, parts compatibility, or servicing requirements.
The classic Defender (1983 to 2016) was a body-on-frame utility vehicle produced in 90, 110, and 130 wheelbase variants. It ran a series of diesel and petrol engine options across its production life, from early 2.25 petrol and diesel units through the 200Tdi, 300Tdi, Td5, and the later 2.4 and 2.2 Puma TDCi engines. Parts for these models are covered in the Defender 90, 110 and 130 parts collection.
The new Defender (2020 onwards) uses a monocoque architecture on Land Rover's D7x platform, which is also used by the Range Rover L460 and Range Rover Sport L461. It is produced in 90, 110, and 130 body configurations and is offered with a range of petrol and diesel engines including the P300, P400, D200, D240, and D300 units. Parts for these models are covered in the new Defender parts collection.
Parts are not interchangeable between the two platforms. If you are unsure which generation you have, use the guidance below before adding to your basket.
Fitment NotesConfirming your generation before ordering is the most reliable way to avoid returns and delays.
The simplest check is the model year. Classic Defenders were produced from 1983 to January 2016. New Defenders entered production from September 2020. There is no Defender model year between 2016 and 2020.
For the classic Defender, the chassis number (VIN) is stamped on the chassis rail on the right-hand side of the engine bay and also appears on a plate fixed to the bulkhead. The VIN encodes body style, engine type, and build year. For the new Defender, the VIN is found on a plate in the engine bay and is also visible through the windscreen on the lower driver-side corner.
If you have your VIN, use the parts search on roverparts.eu or contact Budget Parts directly. Providing your VIN removes ambiguity from fitment, particularly for engine-dependent parts such as gaskets, filters, sensors, and drivetrain components.
Quality TiersBudget Parts stocks three quality tiers across the Defender range. Understanding the difference helps you choose the right part for your build stage, budget, and use case.
Genuine parts are manufactured by Land Rover's approved supply chain and carry Land Rover branding. They are the exact specification used in original assembly. Genuine parts are typically the highest-cost option and are best suited to vehicles being maintained to manufacturer specification, vehicles under warranty, or restorations where originality matters.
OEM parts are manufactured by the same component suppliers that produce parts for the Land Rover production line, but are sold without Land Rover branding. The component itself is often identical to the genuine part. OEM is a strong choice for mechanical replacements where factory specification is required but original branding is not.
Aftermarket parts are produced by third-party manufacturers to a compatible specification. Quality varies by manufacturer and by part type. Budget Parts selects aftermarket lines that meet the fitment and durability requirements of the application. Aftermarket is well suited to high-wear items, body components, and non-safety-critical parts where cost efficiency matters.
All three tiers are clearly labelled on every product listing.
Parts CategoriesThe Defender range is supported across all major parts categories. Both the classic and new platforms are represented, though stock depth varies by generation and component type.
Categories stocked for the Defender range include body and chassis parts, brake parts, clutch system and kits, cooling parts, driveshaft and propshaft parts, electrical parts, engine parts, exhaust parts, fuel system parts, interior parts, lighting parts, service and maintenance parts, suspension parts, and wheels and wheel parts.
For model-specific category depth, navigate into the relevant child collection first and then apply a category filter, or use the category filter on this page alongside the Defender Classic or Defender New model filter.
EU Stock and DispatchBudget Parts operates from The Hague, Netherlands, with warehouse stock available for EU-wide dispatch. Parts marked in stock are held at the warehouse and are available for same-day dispatch on orders placed before the daily cut-off. Backorder is available on parts not currently in stock, with lead times confirmed at the time of order.
Trade and workshop buyers can apply for a wholesale account through the portal linked in the site header. Volume pricing is available on high-turnover lines including filters, brake components, fasteners, and service items.
Platform designation data for the D7x architecture is consistent with Land Rover's published product and technical documentation. The Discovery 5 (L462) uses the related but distinct D7a platform and is not covered by this collection. For VIN decoding and chassis-specific parts identification, the Land Rover JTIS (Jaguar Land Rover Technical Information System) and the relevant Land Rover parts catalogue are the authoritative references.
The articles below cover Defender-specific identification, platform differences, and parts selection in more depth. Each links back to this collection for parts.
A practical Defender buying and parts guide covering TD5 injector faults, 2.4 TDCi DPF issues, brake corrosion, and L663 fitment notes. Useful for both classic and new Defender owners researching parts before purchase.
Defender parts Europe 2025 →A guide to common faults on the 300Tdi classic Defender, with diagnostic notes, the fixes that actually hold, and the proven upgrades worth doing. Useful before ordering 300Tdi engine, cooling, or service parts.
Defender 300Tdi faults →Common 2.4 TDCi Puma faults explained, including DPF blockage, EGR issues, turbo underboost, clutch failure, and MT82 gearbox problems. Covers what to check and the parts most often involved.
Defender 2.4 TDCi problems →The classic Defender (1983 to 2016) is a body-on-frame vehicle. The new Defender (2020 onwards, internal designation L663) uses a monocoque architecture on the D7x platform. The two platforms are entirely different in construction, engine family, and parts fitment. No mechanical parts are interchangeable between them. Always confirm your model year before ordering, and use your VIN to resolve any fitment uncertainty.
The easiest check is the model year. Classic Defenders were produced from 1983 to January 2016. There are no Defender models from 2017 to 2019. New Defenders entered production in 2020. If you are unsure of the year, the VIN plate on a classic Defender is located on the chassis rail in the engine bay and on the bulkhead. On the new Defender, the VIN plate is in the engine bay and is also visible through the lower driver-side corner of the windscreen.
Yes. Budget Parts stocks all three quality tiers for both the classic and new Defender where available. Genuine parts carry Land Rover branding and are built to original assembly specification. OEM parts are manufactured by the same suppliers that supply the Land Rover production line, without brand labelling. Aftermarket parts are third-party components selected for fitment compatibility. Each listing on roverparts.eu clearly identifies which tier the part belongs to.
Yes. Budget Parts dispatches EU-wide from its warehouse in The Hague. Delivery is available across all EU member states. Shipping costs and estimated delivery times are shown at checkout based on your delivery address. Parts marked in stock are available for same-day dispatch on orders placed before the daily cut-off.
Yes. Budget Parts operates a wholesale portal for trade buyers, workshops, and resellers. You can register through the wholesale portal linked at the top of the site. Trade accounts provide access to volume pricing on high-turnover lines including service items, brake components, filters, fasteners, and drivetrain parts. There are no minimum order requirements to open an account.