Land Rover Freelander Parts

Exhaust Camshaft Sprocket for the valve timing drive on the 2.0L 16V TIVCT turbo petrol engine. Mounted on the exhaust camshaft, it is driven by t...

High-Pressure Fuel Injection Pump for the 2.0L GTDi turbocharged petrol engine. This engine-mounted pump raises fuel to the high pressure required ...

High-Pressure Fuel Injection Pump for the 2.0L GTDi turbocharged petrol engine. This engine-mounted pump raises fuel to the high pressure required ...

Oil Cooler dissipates heat from the engine oil to help maintain a stable oil operating temperature. Fitted in the lubrication circuit of the 2.0L ...

Intake Camshaft Sprocket for the 2.0L 16V TIVCT turbocharged petrol engine. Driven by the timing chain, it transmits crankshaft rotation to the int...

Oil Cooler and Filter Assembly combines the engine oil cooler and oil filter housing for the 2.2L TD4 diesel engine (DW12). Mounted in the lubrica...

Oil Cooler and Filter Assembly combines the engine oil cooler and oil filter housing for the 2.2L TD4 diesel engine (DW12). Mounted in the lubrica...

Fuel Pump for the 2.0L TIVCT turbocharged petrol engine - the in-tank fuel pump and sender unit. Mounted inside the fuel tank, it draws fuel and d...

Connecting Rod Kit for the 2.2L DW12 DOHC turbo diesel engine, supplied as a complete set of four connecting rods. The connecting rods link the pi...

Air Conditioning Compressor - the belt-driven pump at the heart of the air-conditioning refrigerant circuit. It draws low-pressure refrigerant gas ...

Alternator Assembly - the belt-driven charging unit that supplies the vehicle's electrical system and recharges the battery while the engine runs. ...

Fuel Injector for the 2.2L Td4 common-rail diesel fuel injection system. The injector meters and atomises high-pressure diesel into the combustion ...

A/C Evaporator for the air conditioning circuit, mounted within the heating and ventilation (HVAC) housing. The evaporator is the heat exchanger i...

Inlet Manifold distributes charge air from the intake system to the cylinder head inlet ports. Fitted to the 2.2L Td4 (DW12) diesel engine, it rou...

Flywheel for the 2.2L 16V common-rail turbo-diesel engine (DW12). It bolts to the rear flange of the crankshaft and carries the starter ring gear ...

Turbocharger Actuator for the 2.2L diesel engine's forced-induction system. It adjusts the turbocharger's variable-geometry mechanism to regulate b...

Turbocharger Assembly for the 2.2L diesel engine, part of the forced-induction system. Exhaust gas drives the turbine, which spins a compressor whe...

Turbocharger Assembly for the 2.0L 16V TiVCT GTDI turbocharged petrol engine (240PS). The turbocharger forms part of the forced-induction system, r...

Trailing Arm - Rear LH - F2

Trailing Arm for the rear suspension, left-hand (near-side), part of the rear multi-link axle assembly. The trailing arm locates the rear wheel ca...

Trailing Arm for the rear suspension, right-hand (off-side), part of the rear multi-link axle assembly. The trailing arm locates the rear wheel ca...

Relay, a 70A 4-pin grey mini power relay. It provides high-current make-and-break switching for a heavy electrical load, letting a low-current con...

LED Festoon Bulb for interior lamps. A double-ended festoon LED that replaces the standard filament festoon bulb in the courtesy, map and interior...

Manifold Absolute Pressure (MAP) Sensor mounted on the inlet manifold, part of the engine management system on the 2.0L 16-valve turbocharged petro...

Thermostat and Housing for the 2.0L 16V Ti-VCT petrol engine, supplied complete as a sealed assembly. It sits in the engine cooling circuit and reg...

Engine Oil Drain Plug for the 2.0L 16V Ti-VCT petrol engine. It threads into the drain point at the base of the oil sump, sealing the lubrication s...

Sensor Assembly

Sensor Assembly

Cam

Camshaft Oil Seal (Front) for the 2.2L DW12 Td4 diesel engine, fitted where the camshaft exits the front of the cylinder head. The seal runs on th...

Relay

Camshaft Oil Seal (Front) for the 2.2L DW12 Td4 diesel engine, fitted where the camshaft exits the front of the cylinder head. The seal runs on th...

MAP Sensor (Manifold Absolute Pressure sensor) in the engine air intake system. The sensor measures the absolute pressure within the intake manifol...

MAP Sensor (Manifold Absolute Pressure sensor) in the engine air intake system. The sensor measures the absolute pressure within the intake manifol...

Heatshield Nut - a fastener used to secure exhaust and underbody heat shields, together with related shielding such as splash guards and fuel-line ...