for Discounts / VAT
for Discounts & Correct VAT
Land Rover Freelander parts for both generations. The L314 (1997 to 2006) and L359 (2006 to 2014) use different platforms, engines, and drivetrains. OEM, Genuine, and aftermarket components in stock. Select your generation below to find correctly fitted parts for your vehicle.
Stop/Tail Light Bulb - 12V 5/21W (trade reference 380) for rear lamp assemblies. This dual-filament bayonet bulb (BAY15d base) provides 5W tail li...
View full detailsWasher Non-Return Valve for the windscreen wash/wipe system. The valve is fitted into the washer fluid line between the pump and the jets. It perm...
View full detailsAir flow meter TD5 OEM VDO /Delphi
Interior Lamp Bulb is a 239-type festoon bulb rated 12V 5W with a C11 (SV8.5) double-ended cap, used in the interior lighting circuit. The bulb se...
View full detailsCoolant Temperature Sensor threads into the cylinder head and reports engine coolant temperature to the engine management system and the instrument...
View full detailsscrew M5 x 12
Bulb rated 12V 10W with a BA15S bayonet cap. A single-contact bayonet-fitting (BA15S) bulb for 12-volt circuits. The single-contact cap suits sing...
View full detailsAlarm Remote Transmitter, the handset used for remote operation of the vehicle's anti-theft alarm and central locking system. The unit transmits a...
View full detailsFlanged Head Screw is an M6 x 12mm machine screw with an integral flange beneath the head. The flange spreads clamping load over a wider area and ...
View full detailsMaster Lighting & Indicator Switch, a column-mounted stalk within the steering column switch assembly. It controls indicator operation and head...
View full detailsWiper Blade for the rear screen wash/wipe system. Fits the rear wiper arm and sweeps the tailgate glass, operating with the rear wiper motor and w...
View full detailsInertia Switch in the fuel supply and engine electrical circuit. It cuts electrical power to the fuel pump on a sudden impact or severe deceleratio...
View full detailsBulb - 501 is a 12V 5W capless wedge-base bulb, designated W5W. The one-piece glass base pushes directly into the holder, with the contact wires f...
View full detailsRear Fog Lamp for the rear lighting circuit, providing the high-intensity red rear light used to make the vehicle conspicuous from behind in poor v...
View full detailsFlanged Screw - M6 × 12mm is a metric flanged-head fastener used in body, chassis, and electrical component assembly points on Land Rover vehicles....
View full detailsOil Pressure Switch for the V8 petrol engine. The switch monitors oil pressure in the engine lubrication circuit and activates the instrument clus...
View full detailsParking Sensor for the Park Distance Control (PDC) system. This ultrasonic sensor fits into the bumper and transmits and receives ultrasonic pulses...
View full detailsAutotec Reverse Light Switch for CDU51/CDU51L manual-gearbox applications. It completes the reverse lamp circuit when reverse is selected. Applica...
View full detailsIndicator Bulb - amber replacement bulb for the exterior indicator lighting circuit. Installs into the indicator lamp housing and provides the amb...
View full detailsBlade Fuse - 25A for Land Rover electrical systems. This 25A blade fuse protects individual circuits in the vehicle fuse box from overcurrent damage.
Ignition Lead - King The king lead in the high-tension ignition circuit. It carries the high-tension output from the ignition coil to the centre t...
View full detailsWiper Spindle Cap - outer cap for the windscreen wiper spindle, installed at the outer end of the spindle where it passes through the scuttle panel...
View full detailsKey Fob Battery - CR2032 3V lithium button cell for Land Rover remote central locking handsets. Fits directly into the remote key fob housing. Rep...
View full detailsFront ABS Sensor is a wheel speed sensor within the anti-lock braking system. Mounted at the front hub, it generates a signal proportional to whee...
View full detailsCamshaft Position Sensor for the 1.8L 4-cylinder K Series petrol engine, part of the engine management sensor group mounted at the cylinder head. ...
View full detailsBrake Light Switch for the braking and signalling circuit. Mounted at the brake pedal assembly, this switch closes when the pedal is depressed, co...
View full detailsCrankshaft Position Sensor for the 2.2L TD4 common-rail direct-injection diesel engine. Mounted at the crankshaft, the sensor reads the reluctor (...
View full detailsWiper Motor Rack for the front windscreen wash/wipe system, for left-hand drive applications. The rack transfers drive from the wiper motor to the...
View full detailsHeater Resistor Pack for the heating and ventilation (HVAC) blower circuit. It provides the stepped resistance that sets the lower blower motor fan...
View full detailsChangeover Relay
Hill Descent Control Switch - push-push switch mounted in the clutch (bell) housing, forming part of the Hill Descent Control input circuit. The s...
View full detailsCoolant Temperature Sensor in the engine cooling circuit. This sensor monitors coolant temperature and transmits a signal to the engine management...
View full detailsBulb Holder Assembly - Clock & Cigar Lighter
Relay - Normally Open is a plug-in make-contact relay used in the vehicle fuse and relay panel. The relay closes its high-current main contacts on...
View full detailsHeavy-duty winter wiper blades, supplied as a front pair. The blade frame is enclosed in a protective cover so that snow, ice and slush cannot pac...
View full detailsParking Aid Sensor - ultrasonic transducer for the Parking Distance Control (PDC) system, mounted through the bumper cover. The transducer emits a...
View full detailsStop and Tail Bulb - 12V 21/5W twin-filament bulb. Two filaments share a single envelope: the 21W filament serves the stop lamp and the 5W filamen...
View full detailsW5W Capless Bulb - 12V 5W wedge-base bulb. The W2.1x9.5d capless base pushes straight into the lampholder, the bulb's own wire leads folded back a...
View full detailsH7 Halogen Bulb - 12V 55W headlamp bulb. H7 is a single-filament halogen capsule on a PX26d base, serving the dipped or main beam function dependi...
View full detailsH7 Halogen Bulb - Twin Pack - 12V 55W headlamp bulbs, supplied as a pair. H7 is a single-filament halogen capsule on a PX26d base, serving the dip...
View full detailsRear Lamp Seal - left-hand foam gasket sealing the rear lamp assembly against the body panel. It sits between the lamp housing flange and the body...
View full detailsRear Lamp Assembly - Stop & Flasher - rear lamp cluster within the rear exterior lighting assembly group, combining the stop lamp and direction...
View full detailsThrottle Potentiometer Kit for the throttle body, operating within the engine fuel and throttle control system. The potentiometer is a rotary posi...
View full detailsCrankshaft Position Sensor for the 2.0L 16V Ti-VCT turbocharged petrol engine (240PS). It mounts in the block adjacent to the crankshaft reluctor r...
View full detailsCrankshaft Position Sensor for the 2.0L 16V Ti-VCT turbocharged petrol engine (240PS). It mounts in the block adjacent to the crankshaft reluctor r...
View full detailsOil Pressure Switch Assembly, part of the engine lubrication system. Threaded into the oil gallery, it senses engine oil pressure and signals the ...
View full detailsWindscreen Wiper Blade for the front wash-wipe system. This is the front wiper blade for the passenger-side arm on left-hand-drive vehicles, sweep...
View full detailsWindscreen Wiper Blade for the front wash-wipe system. This is the front wiper blade for the passenger-side arm on left-hand-drive vehicles, sweep...
View full details1997 to 2006. K-series, KV6, L-series, and TD4 (BMW M47R) engines.
Freelander 1 parts →2006 to 2014. eD4, TD4, and SD4 diesel variants plus 3.2 petrol.
Freelander 2 parts →The Land Rover Freelander ran across two distinct generations and was discontinued in 2014. Each generation uses different platforms, engines, and drivetrains. Parts are not interchangeable between them, and fitment must be confirmed by generation, model year, and engine type before ordering.
The Freelander 1 (L314) was produced from 1997 to 2006 in 3-door and 5-door body styles. Engine options included the 1.8-litre Rover K-series petrol, the 2.5-litre KV6 V6 petrol, the early 2.0-litre Rover L-series diesel (1997 to 2000), and the 2.0-litre BMW M47R TD4 diesel (2001 to 2006). It used a monocoque structure with a viscous coupling unit and intermediate reduction drive, with no low-range transfer case. The Freelander 1 sold over 540,000 units across Europe during its nine-year production run, making it the best-selling four-wheel drive vehicle in Europe for five consecutive years after its 1997 launch.
The Freelander 2 (L359) was produced from 2006 to 2014 as a 5-door estate only. It is based on the Ford EUCD platform and shares its architecture with the Volvo XC60. Diesel engines used the 2.2-litre PSA DW12 unit in three states of tune: eD4 (150 hp, front-wheel drive from 2011), TD4 (160 hp), and SD4 (190 hp). Petrol options included the 3.2-litre Volvo B6324S5 inline six and, in later markets, a 2.0-litre Ford EcoBoost petrol. Four-wheel drive models use an active Haldex coupling system. Production ended in October 2014. The Freelander 2 was succeeded by the Discovery Sport.
Vehicle IdentificationIf you are unsure which generation you own, the quickest method is to check the vehicle's production year. Vehicles produced up to and including 2006 are Freelander 1 (L314). Vehicles produced from late 2006 onward are Freelander 2 (L359). The VIN plate is located on the door sill or the engine bay identification plate, depending on market variant, and confirms the build date and chassis designation.
For engine confirmation, the TD4 badge appears on both generations but refers to different engines. On Freelander 1 vehicles produced from 2001, the TD4 is a 2.0-litre BMW M47R unit. On Freelander 2 vehicles, the TD4 is a 2.2-litre PSA DW12 unit. These engines use different parts throughout and must not be confused.
Land Rover's official VIN model year guide can help you confirm your vehicle's model year from its VIN: Land Rover VIN model year guide.
Quality TiersBudget Parts stocks three quality tiers for Freelander components, visible in the collection filter.
Genuine parts are produced by Land Rover or JLR and carry the OEM part number alongside the Land Rover branding. They are the most accurate match to the original specification. Genuine Land Rover parts are listed across both Freelander generations where available.
OEM parts are manufactured by the same original equipment suppliers that produce components for Land Rover's assembly line, but sold without Land Rover branding. These are technically equivalent to Genuine parts for most applications and are the preferred choice for workshops sourcing at trade cost.
Aftermarket parts are produced by independent manufacturers to meet or exceed OEM specification. Quality varies by manufacturer. Budget Parts selects aftermarket lines that meet the functional requirements of the original part and are appropriate for use on Freelander 1 and Freelander 2 vehicles.
For critical drivetrain, braking, and suspension components, OEM or Genuine parts are recommended. Aftermarket parts are well-suited to consumables, service items, trim components, and fasteners.
Trade BuyersThe Freelander is a common vehicle in independent workshops across the Netherlands, Belgium, and Germany. Budget Parts supplies trade buyers and garages across the EU. If you service Freelanders regularly and require volume pricing or VAT-correct invoicing for business purchases, the wholesale portal is available via the header of this site.
Technical GuidesThese articles provide deeper technical context for Freelander owners and workshop technicians. They support diagnosis and part selection and link directly to the relevant generation parts collections.
A technical reference covering driveline, transmission, body, suspension, steering, and software issues across the Freelander 2 (L359) range. Useful for identifying which components are involved before ordering replacement parts.
Freelander 2 faults and fixes guide →A maintenance-focused guide covering the most common wear items on the Freelander 1 (L314), including driveshaft assemblies, engine gaskets, and cooling components. Relevant for owners keeping older L314 vehicles in service.
Freelander 1 maintenance guide →Covers driveline fault diagnosis across multiple Land Rover models including the Freelander 2. Relevant to the VCU and IRD system on Freelander 1 vehicles and the Haldex coupling drivetrain on Freelander 2 models.
Land Rover driveshaft and driveline diagnosis →Driveshafts, propshafts, universal joints, and related driveline components for both Freelander generations.
Driveshaft and propshaft parts →Cooling system components including water pumps, thermostats, and hoses. K-series and TD4 cooling parts are common service items on the L314.
Land Rover cooling parts →Engine components for K-series, KV6, L-series, M47R, DW12, and B6324S5 power units across both Freelander generations.
Land Rover engine parts →Brake discs, pads, callipers, and hydraulic components. Use the collection filter to narrow to your Freelander generation.
Land Rover brake parts →Shock absorbers, springs, bushings, and arms. Freelander 1 and Freelander 2 use different suspension architectures, so confirm generation before ordering.
Land Rover suspension parts →Combined service kits and consumables for routine Freelander maintenance. Listed under service kits when available for your engine variant.
Land Rover service kits →No. The Freelander 1 (L314, 1997 to 2006) and Freelander 2 (L359, 2006 to 2014) use different platforms, engines, drivetrains, and electrical architectures. A Freelander 1 TD4 uses a 2.0-litre BMW M47R engine. A Freelander 2 TD4 uses a 2.2-litre PSA DW12 engine. Parts designed for one generation will not fit the other. Always confirm your generation, model year, and engine type before ordering.
The most reliable check is the production year. Freelander 1 (L314) vehicles were produced from October 1997 to 2006 and were sold in 3-door and 5-door body styles. Note that vehicles produced in late 1997 typically carry a 1998 model year designation. Freelander 2 (L359) vehicles were produced from late 2006 to October 2014 as 5-door estates only. If your vehicle was registered in late 2006 or early 2007, check the build date on the VIN plate, located on the door sill or in the engine bay. The chassis code L314 confirms a Freelander 1. The chassis code L359 confirms a Freelander 2.
Genuine parts carry Land Rover branding and are produced to OEM specification by JLR-approved suppliers. OEM parts are manufactured by the same original equipment suppliers but sold without Land Rover branding, making them a cost-effective equivalent for most applications. Aftermarket parts are produced by independent manufacturers and vary in quality. For braking, drivetrain, and suspension components, OEM or Genuine parts are recommended. For service items, consumables, and trim, quality aftermarket parts are a practical choice.
Yes. Budget Parts is based in The Hague and holds Freelander parts in EU stock. Orders are fulfilled for customers and workshops across the Netherlands, Belgium, Germany, France, and other EU member states. Fitment support and VIN-based part confirmation are available for both Freelander generations.
The Freelander 2 was discontinued in October 2014 and replaced by the Discovery Sport in 2015. The Freelander name was not used on any Land Rover vehicle after that date. A separate Freelander-branded electric vehicle is being developed under a JLR and Chery joint venture for the Chinese market, but this is an entirely different product with no parts commonality with the L314 or L359. Budget Parts supplies parts for the original Freelander 1 (L314) and Freelander 2 (L359) only.