for Discounts / VAT
for Discounts & Correct VAT
Land Rover Freelander parts for both generations. The L314 (1997 to 2006) and L359 (2006 to 2014) use different platforms, engines, and drivetrains. OEM, Genuine, and aftermarket components in stock. Select your generation below to find correctly fitted parts for your vehicle.
Mat set Freelander 4pcs
Exhaust gas recirculation valve
Bonnet Hinge Cover - a front-end trim finisher that conceals the left-hand bonnet hinge where it mounts at the scuttle/plenum. It clips over the h...
View full detailsBrake Disc - Front, vented single disc. Fitted to the front hub and rotating within the brake caliper assembly, the disc forms the friction surfac...
View full detailsExterior Mirror - complete right-hand door mirror assembly with a power-folding head. The housing carries the mirror glass and an electrically ope...
View full detailsExhaust Silencer is the rear silencer and tailpipe assembly on 2.0L diesel applications. Installed in the rear section of the exhaust, it attenuat...
View full detailsRear Passenger Rubber Mat Set is a set of drop-in mats that protect the rear passenger floor area from dirt, moisture and wear. Moulded to the con...
View full detailsBrake Disc - Front, vented single disc. Fitted to the front hub and rotating within the brake caliper assembly, the disc forms the friction surfac...
View full detailsFront Bumper Assembly is the complete moulded front bumper, supplied with the integrated front fog lamps fitted. It mounts across the front of the...
View full detailsCover bonnet hinge Freelander LH
Wind Deflectors - front door window wind deflector set, supplied as a pair. The deflectors fit to the tops of the front door window openings, allo...
View full detailsBrake Disc - Front, vented single disc. Fitted to the front hub and rotating within the brake caliper assembly, the disc forms the friction surfac...
View full detailsCrossmember front lower Freelander
Front Rubber Mat Set is a set of drop-in footwell mats that protect the front floor from dirt, moisture and wear. Moulded to the contour of the fr...
View full detailsRelay - normally open 4-pin relay for use in the underbonnet fuse and relay box. In its de-energised state the load contacts are open; energising t...
View full detailsBrake Disc - Coated - Front, vented single disc with corrosion-protective surface coating. Fitted to the front hub and rotating within the brake c...
View full detailsBrake Disc - Front, vented single disc. Fitted to the front hub and rotating within the brake caliper assembly, the disc forms the friction surfac...
View full detailsCoolant Temperature Sensor threads into the cylinder head and reports engine coolant temperature to the engine management system and the instrument...
View full detailsPower Steering Fluid, 1 litre. Synthetic hydraulic fluid for the power-assisted steering system, meeting the CHF 202 / WSS-M2C204-A2 specification...
View full detailsMud Flap Kit for the rear wheel arches. Reduces road spray, mud and stone throw from the rear tyres onto the lower bodywork and following traffic....
View full detailsRubber Mats - Front & Rear - LHD - FL2
Freelander2 Gen3 Coupling Filter
Front hub bearing and upright assembly, right-hand side, supplied as a complete unit within the front suspension and hub assembly. The upright (st...
View full detailsDiff Overhaul Kit - Inc Oil - Rear
Bonnet Insulation Clip retains the sound-and-heat insulation pad to the underside of the bonnet. The clip secures the insulation pad against the b...
View full detailsDoor Check Arm Pin for the door check strap assembly. This pin secures the door check arm to its mounting bracket on the body, retaining the arm t...
View full detailsAir Conditioning Compressor for the refrigerant circuit on 2.0L diesel applications fitted with air conditioning. Belt-driven from the engine, the...
View full detailsFront Wing Assembly - Left Hand is the outer body panel covering the front wheel arch on the left-hand side of the vehicle. It forms the front-lef...
View full detailsEGR Valve Control - vacuum control valve in the exhaust gas recirculation (EGR) system. Regulates the vacuum signal that operates the EGR valve, c...
View full detailsTrailer Electrics – 13-Pin provides the 13-pin towing electrical connection, supplying power and signal from the vehicle wiring to a trailer or tow...
View full detailsSuspension Damper
Suspension Damper
Filter - Air
Timing Belt Kit with Water Pump for the camshaft drive of the 2.2L DOHC diesel (DW12) engine. The timing belt synchronises crankshaft and camshaft...
View full detailsJoint - Universal - Propshaft - Less V6
Coated Brake Disc
Crankshaft Position Sensor for the 2.2L TD4 common-rail direct-injection diesel engine. Mounted at the crankshaft, the sensor reads the reluctor (...
View full detailsIn-Tank Fuel Pump for the 2.0L Td4 diesel fuel delivery system. Mounted inside the fuel tank, the pump draws diesel from the tank and delivers it ...
View full detailsValve Cover Gasket seals the cylinder head cover (rocker cover) to the cylinder head on the 2.0L 16V petrol engine. It forms the oil-tight joint a...
View full detailsCrankshaft Position Sensor for the 2.2L TD4 common-rail direct-injection diesel engine. Mounted at the crankshaft, the sensor reads the reluctor (...
View full detailsBrake Disc for the rear axle, part of the rear disc brake assembly. The disc provides the rotating friction surface against which the rear brake p...
View full detailsExhaust Manifold Gasket for the 1.8L K-Series petrol engine, part of the exhaust manifold assembly. It seals the joint between the exhaust manifol...
View full detailsTailgate Gas Strut for the rear tailgate/upper door assembly. The pressurised strut supports the weight of the raised tailgate, assisting the lift...
View full detailsFront Brake Pad Set Front axle disc brake pads, part of the front disc brake assembly. The pads are carried in the front caliper and are clamped a...
View full detailsEngine Oil Filter for the 2.5L KV6 V6 petrol engine. Cartridge-type (replaceable element) filter that installs in the oil filter housing to clean ...
View full detailsWiper Blade - Rear
Brake Shoe Set
ABS Speed Sensor for the rear wheel, part of the anti-lock braking system. The sensor measures rear wheel rotational speed and feeds the ABS contr...
View full details1997 to 2006. K-series, KV6, L-series, and TD4 (BMW M47R) engines.
Freelander 1 parts →2006 to 2014. eD4, TD4, and SD4 diesel variants plus 3.2 petrol.
Freelander 2 parts →The Land Rover Freelander ran across two distinct generations and was discontinued in 2014. Each generation uses different platforms, engines, and drivetrains. Parts are not interchangeable between them, and fitment must be confirmed by generation, model year, and engine type before ordering.
The Freelander 1 (L314) was produced from 1997 to 2006 in 3-door and 5-door body styles. Engine options included the 1.8-litre Rover K-series petrol, the 2.5-litre KV6 V6 petrol, the early 2.0-litre Rover L-series diesel (1997 to 2000), and the 2.0-litre BMW M47R TD4 diesel (2001 to 2006). It used a monocoque structure with a viscous coupling unit and intermediate reduction drive, with no low-range transfer case. The Freelander 1 sold over 540,000 units across Europe during its nine-year production run, making it the best-selling four-wheel drive vehicle in Europe for five consecutive years after its 1997 launch.
The Freelander 2 (L359) was produced from 2006 to 2014 as a 5-door estate only. It is based on the Ford EUCD platform and shares its architecture with the Volvo XC60. Diesel engines used the 2.2-litre PSA DW12 unit in three states of tune: eD4 (150 hp, front-wheel drive from 2011), TD4 (160 hp), and SD4 (190 hp). Petrol options included the 3.2-litre Volvo B6324S5 inline six and, in later markets, a 2.0-litre Ford EcoBoost petrol. Four-wheel drive models use an active Haldex coupling system. Production ended in October 2014. The Freelander 2 was succeeded by the Discovery Sport.
Vehicle IdentificationIf you are unsure which generation you own, the quickest method is to check the vehicle's production year. Vehicles produced up to and including 2006 are Freelander 1 (L314). Vehicles produced from late 2006 onward are Freelander 2 (L359). The VIN plate is located on the door sill or the engine bay identification plate, depending on market variant, and confirms the build date and chassis designation.
For engine confirmation, the TD4 badge appears on both generations but refers to different engines. On Freelander 1 vehicles produced from 2001, the TD4 is a 2.0-litre BMW M47R unit. On Freelander 2 vehicles, the TD4 is a 2.2-litre PSA DW12 unit. These engines use different parts throughout and must not be confused.
Land Rover's official VIN model year guide can help you confirm your vehicle's model year from its VIN: Land Rover VIN model year guide.
Quality TiersBudget Parts stocks three quality tiers for Freelander components, visible in the collection filter.
Genuine parts are produced by Land Rover or JLR and carry the OEM part number alongside the Land Rover branding. They are the most accurate match to the original specification. Genuine Land Rover parts are listed across both Freelander generations where available.
OEM parts are manufactured by the same original equipment suppliers that produce components for Land Rover's assembly line, but sold without Land Rover branding. These are technically equivalent to Genuine parts for most applications and are the preferred choice for workshops sourcing at trade cost.
Aftermarket parts are produced by independent manufacturers to meet or exceed OEM specification. Quality varies by manufacturer. Budget Parts selects aftermarket lines that meet the functional requirements of the original part and are appropriate for use on Freelander 1 and Freelander 2 vehicles.
For critical drivetrain, braking, and suspension components, OEM or Genuine parts are recommended. Aftermarket parts are well-suited to consumables, service items, trim components, and fasteners.
Trade BuyersThe Freelander is a common vehicle in independent workshops across the Netherlands, Belgium, and Germany. Budget Parts supplies trade buyers and garages across the EU. If you service Freelanders regularly and require volume pricing or VAT-correct invoicing for business purchases, the wholesale portal is available via the header of this site.
Technical GuidesThese articles provide deeper technical context for Freelander owners and workshop technicians. They support diagnosis and part selection and link directly to the relevant generation parts collections.
A technical reference covering driveline, transmission, body, suspension, steering, and software issues across the Freelander 2 (L359) range. Useful for identifying which components are involved before ordering replacement parts.
Freelander 2 faults and fixes guide →A maintenance-focused guide covering the most common wear items on the Freelander 1 (L314), including driveshaft assemblies, engine gaskets, and cooling components. Relevant for owners keeping older L314 vehicles in service.
Freelander 1 maintenance guide →Covers driveline fault diagnosis across multiple Land Rover models including the Freelander 2. Relevant to the VCU and IRD system on Freelander 1 vehicles and the Haldex coupling drivetrain on Freelander 2 models.
Land Rover driveshaft and driveline diagnosis →Driveshafts, propshafts, universal joints, and related driveline components for both Freelander generations.
Driveshaft and propshaft parts →Cooling system components including water pumps, thermostats, and hoses. K-series and TD4 cooling parts are common service items on the L314.
Land Rover cooling parts →Engine components for K-series, KV6, L-series, M47R, DW12, and B6324S5 power units across both Freelander generations.
Land Rover engine parts →Brake discs, pads, callipers, and hydraulic components. Use the collection filter to narrow to your Freelander generation.
Land Rover brake parts →Shock absorbers, springs, bushings, and arms. Freelander 1 and Freelander 2 use different suspension architectures, so confirm generation before ordering.
Land Rover suspension parts →Combined service kits and consumables for routine Freelander maintenance. Listed under service kits when available for your engine variant.
Land Rover service kits →No. The Freelander 1 (L314, 1997 to 2006) and Freelander 2 (L359, 2006 to 2014) use different platforms, engines, drivetrains, and electrical architectures. A Freelander 1 TD4 uses a 2.0-litre BMW M47R engine. A Freelander 2 TD4 uses a 2.2-litre PSA DW12 engine. Parts designed for one generation will not fit the other. Always confirm your generation, model year, and engine type before ordering.
The most reliable check is the production year. Freelander 1 (L314) vehicles were produced from October 1997 to 2006 and were sold in 3-door and 5-door body styles. Note that vehicles produced in late 1997 typically carry a 1998 model year designation. Freelander 2 (L359) vehicles were produced from late 2006 to October 2014 as 5-door estates only. If your vehicle was registered in late 2006 or early 2007, check the build date on the VIN plate, located on the door sill or in the engine bay. The chassis code L314 confirms a Freelander 1. The chassis code L359 confirms a Freelander 2.
Genuine parts carry Land Rover branding and are produced to OEM specification by JLR-approved suppliers. OEM parts are manufactured by the same original equipment suppliers but sold without Land Rover branding, making them a cost-effective equivalent for most applications. Aftermarket parts are produced by independent manufacturers and vary in quality. For braking, drivetrain, and suspension components, OEM or Genuine parts are recommended. For service items, consumables, and trim, quality aftermarket parts are a practical choice.
Yes. Budget Parts is based in The Hague and holds Freelander parts in EU stock. Orders are fulfilled for customers and workshops across the Netherlands, Belgium, Germany, France, and other EU member states. Fitment support and VIN-based part confirmation are available for both Freelander generations.
The Freelander 2 was discontinued in October 2014 and replaced by the Discovery Sport in 2015. The Freelander name was not used on any Land Rover vehicle after that date. A separate Freelander-branded electric vehicle is being developed under a JLR and Chery joint venture for the Chinese market, but this is an entirely different product with no parts commonality with the L314 or L359. Budget Parts supplies parts for the original Freelander 1 (L314) and Freelander 2 (L359) only.