Land Rover Freelander Parts

Luggage Tie-Down Hook - anchor hook in the luggage compartment for securing loads, integrated with the side trim retainer. Located in the luggage ...

Flange Bolt is an M8 x 55 mm bolt with an integral flange beneath the head. The flange spreads clamp load across the joint face and acts as a buil...

Bolt - M6 x 80mm is a metric threaded fastener with a 6 mm nominal thread diameter and an 80 mm shank length. It secures bolted joints where an M6...

Wheel Stud for the front and rear axle hubs on the Freelander 1. This stud is pressed into the hub flange and provides the threaded fixing point f...

Finisher Clip - a retaining clip for exterior body finishers and mouldings. The clip secures a trim finisher or moulding to the body panel, engagi...

Indicator Bulb - amber replacement bulb for the exterior indicator lighting circuit. Installs into the indicator lamp housing and provides the amb...

Visco Unit Bearing for the rear propshaft, supporting the viscous coupling unit (VCU) in the four-wheel-drive driveline. The bearing locates on th...

Wheel Brake Cylinder is the rear wheel cylinder of the drum brake assembly. It converts hydraulic pressure from the brake circuit into mechanical ...

Thermostat Housing Gasket seals the joint between the thermostat housing and the engine, preventing coolant leakage at the housing mating face. Fo...

Rear Suspension Arm forming part of the rear multi-link suspension. It links the rear subframe to the wheel knuckle, locating the wheel and contro...

Bolt securing the front suspension lower control arm at its rear fixing point. M14 x 90mm, Torx drive head.

Suspension Arm Nut - M16 flanged nut used on the rear suspension. It secures the lateral and lower arm pivot bolts where they pass through the sus...

Bolt securing a rear suspension arm to the rear knuckle. M14 x 75mm with a Torx head.

M14 x 105mm Bolt is a suspension and steering mounting fastener. It secures the rear suspension arm to the bearing hub, and is also used to mount ...

Rear Suspension Crosslink is a lateral locating link within the rear multi-link suspension assembly. It connects the rear subframe to the wheel kn...

Flanged Nut - M10 flanged fastener. The integral flange spreads the clamping load over a wider area and resists loosening under vibration, removin...

Blade Fuse - 25A for Land Rover electrical systems. This 25A blade fuse protects individual circuits in the vehicle fuse box from overcurrent damage.

Bolt - M6 x 35 - a threaded fastener with a 6 mm metric thread and a 35 mm length. Used to clamp and secure components together at points where th...

Rear Suspension Arm Washer is used at the rear knuckle and suspension arm mountings. It sits under the arm fixing bolt, spreading the clamp load a...

Ignition Lead - King The king lead in the high-tension ignition circuit. It carries the high-tension output from the ignition coil to the centre t...

Flywheel Timing Pin - an engine timing tool for 4-cylinder diesel engines that locks the flywheel at top dead centre (TDC) so the crankshaft is hel...

Door Check Arm Pin for the door check strap assembly. This pin secures the door check arm to its mounting bracket on the body, retaining the arm t...

Bolt is a threaded fastener used across several assemblies, including door latch mechanisms, front seat bases and anti-lock braking system mounting...

Hook & Loop Fastening Strap for securing and bundling loose items within the vehicle interior, cargo area, or workshop. The strap wraps around ...

Wiper Spindle Cap - outer cap for the windscreen wiper spindle, installed at the outer end of the spindle where it passes through the scuttle panel...

Oil Cooler - Heat Exchanger for the Intermediate Reduction Drive (IRD) transfer unit on the Freelander 1. This oil-to-coolant heat exchanger manag...

Protective Coating Kit - Tintable (4 L) for applying a durable, textured surface coating to body panels, underbody areas, wheel arches, load beds, ...

Crankshaft Bearing (main bearing shell) for the BMW M51D25 2.5L 6-cylinder diesel engine. The main bearing shells sit in the bearing saddles of th...

Oil Cooler Housing End Cap - LH - the left-hand end cap that closes the engine oil cooler housing on the 2.0 L Series diesel. The oil cooler housi...

Bolt propshaft

Key Fob Battery - CR2032 3V lithium button cell for Land Rover remote central locking handsets. Fits directly into the remote key fob housing. Rep...

Front ABS Sensor is a wheel speed sensor within the anti-lock braking system. Mounted at the front hub, it generates a signal proportional to whee...

Rear brake shoe set Freel. 1A>

Camshaft Position Sensor for the 1.8L 4-cylinder K Series petrol engine, part of the engine management sensor group mounted at the cylinder head. ...

Oil seal camshaft OEM for : Cylinder Head 2.0L 4 Cyl MPi T Series Petrol and L-series 2.0L 8V Diesel) - Discovery1 2.0 MPi 4 cyl. petrol, - Defen...

Mirror Glass - replacement left-hand exterior mirror glass with a convex profile. Fits into the exterior door mirror housing as a direct replaceme...

Clutch Kit for the TD4 2.0L diesel (M47), manual transmission. Lead-free. The kit contains the clutch cover (pressure plate) and the driven plate....

Drive Belt for the auxiliary drive system of the 2.0L 4-Cylinder 8-valve TCie Rover diesel engine, on air-conditioned applications. Driven from th...

Brake Pad Set is a set of front disc brake friction pads for the front-axle braking assembly. The pads locate in the front brake calipers and are ...

Brake Light Switch for the braking and signalling circuit. Mounted at the brake pedal assembly, this switch closes when the pedal is depressed, co...

Camshaft Oil Seal (front) seals the drive end of the camshaft where it exits the cylinder head, retaining oil within the valvetrain and preventing ...

Exhaust Downpipe Gasket for the Freelander 1 1.8L K-Series petrol engine (up to VIN YA999999). This gasket seals the flanged joint between the exh...

Oil Pump Seal for the 1.8L K-series petrol engine. Seals the oil pump body to prevent oil loss at the pump housing interface. Installed at the oil...

Shock Absorber for the right-hand side of the rear suspension. The shock absorber (damper) controls movement of the rear suspension, damping road-...

Brake Calliper Fitting Kit for the rear brake callipers. This kit contains the slider pins and rubber dust boots for the rear brake calliper. The ...

Crankshaft Position Sensor for the 2.2L TD4 common-rail direct-injection diesel engine. Mounted at the crankshaft, the sensor reads the reluctor (...