Land Rover Freelander Parts

Parking Sensor for the park distance control (PDC) system, used in both front and rear bumper positions. The sensor mounts into its aperture in th...

Keyless Entry and Start Aerial is the receiver antenna for the passive keyless entry and push-button start system, part of the vehicle's anti-theft...

Remote Control Receiver is part of the vehicle anti-theft alarm system, operating on the 433MHz radio frequency band. It receives the coded radio ...

Screw - a general fixing screw used at several mounting points across the driveline and body, including transmission and transfer case mountings, t...

Turbocharger Circlip - retaining clip for the turbocharger actuator on diesel turbocharger installations. It secures the actuator rod to the contr...

Parcel Shelf Catch Clip is the retaining catch for the load compartment cover (parcel shelf), part of the loadspace trim assembly. Supplied in an e...

Air Conditioning O-Ring - a sealing ring for the air conditioning refrigerant circuit. It seals the joints between refrigerant lines and component...

Amber Bulb - 12V 5W wedge-base (W5W) bulb with an amber envelope, used in the exterior lighting circuit. It serves the direction indicator functio...

O-Ring, 11mm - a sealing ring used in the power steering hydraulic circuit, at the union joints of the pressure supply and return hoses. It seats ...

Washer Bottle Filler Cap - the filler cap for the windscreen washer fluid reservoir. It closes the reservoir filler neck, sealing the washer fluid...

D3S xenon headlamp bulb, supplied with its igniter, for headlamp units originally built as bi-xenon or adaptive xenon assemblies. D3S is a mercury...

Mirror Glass for the left-hand exterior rear view mirror, part of the Exterior Mirror Assembly. The glass is renewed separately from the mirror ho...

Exhaust Gas Temperature Sensor for the front position in the exhaust front pipe and catalyst assembly. The sensor threads into the front pipe upst...

Number Plate Lamp - LED is the rear licence plate illumination unit within the rear lighting circuit. It sits in the rear number plate surround an...

Seat Back Adjustment Handle - the operating handle for the front seat backrest recline mechanism, mounted on the outboard side of the seat frame. ...

Cigar Lighter Base Assembly - the socket housing for the cigar lighter and 12V auxiliary power point. It mounts in the instrument panel or floor co...

Cigar Lighter Base - the socket housing for the cigar lighter and 12V auxiliary power point. It mounts in the instrument panel or floor console and...

O-Ring - 9.5 x 2.5 mm seals a joint in the air conditioning refrigerant circuit, at the condenser and compressor connections. Compatible with syst...

Double-DIN Radio Fascia Kit for fitting an aftermarket double-DIN head unit in place of the factory radio. The kit contains the double-DIN fascia ...

Front Indicator Bulb - PY21W amber signal bulb, 12V 21W, with a BAU15s offset-pin bayonet base. It fits the front direction indicator lamp. The am...

Low Beam Headlamp Bulb - H7 halogen bulb, 12V 55W, PX26d base, for headlamp assemblies with halogen lighting. Single-filament H7 bulb serving the ...

Number Plate Lamp - With Bulb is the rear licence plate illumination unit within the rear lighting circuit. It sits in the rear number plate surro...

Bolt - M10 x 25 mm, with washer. Underbody and chassis fixing used to secure engine splash shields, heat shields and underbody protection panels t...

Leak Detection Pump - DMTL (Diagnostic Module Tank Leakage) unit for the fuel tank evaporative emission (EVAP) system. The module sits between the...

Bolt Mounting bolt for the power steering pump and front cover housing, and for air conditioning compressor and condenser mountings.

Anti-Squeal Shim - Set of 4 is a set of self-adhesive noise-dampening shims for disc brake pads. Each shim is cut to shape and bonded to the steel...

Parking Aid Sensor - ultrasonic transducer for the Parking Distance Control (PDC) system, mounted through the rear bumper cover. Straight-bodied ty...

Tyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...

D3S xenon headlamp bulb, supplied with its igniter, for headlamp units originally built as bi-xenon or adaptive xenon assemblies. D3S is a mercury...

Door Latch for the rear door, left-hand side, operating within the door lock control assembly. The latch engages the striker on the body aperture t...

Mirror Housing Cover for the exterior door mirror assembly, left-hand side. The cover is the outer cap that fits over the mirror housing to enclos...

Mirror Housing Cover for the exterior door mirror assembly, right-hand side. The cover is the outer cap that fits over the mirror housing to enclo...

Front Door Latch - LH for the front door locking assembly, left-hand side. This latch mechanism mounts inside the front left-hand door and retains...

Relay, a 70A 4-pin grey mini power relay. It provides high-current make-and-break switching for a heavy electrical load, letting a low-current con...

LED Festoon Bulb for interior lamps. A double-ended festoon LED that replaces the standard filament festoon bulb in the courtesy, map and interior...

Stud

Sensor Assembly

Sensor Assembly

Mirror Glass - Convex - RH for the right-hand exterior door mirror. The convex (wide-angle) glass widens the rearward field of view to reduce the o...