Land Rover Fuel System Parts

Choke Cable for the V8 carburettor engine, part of the manual choke control system on right-hand drive Defender 90 and 110 models. This cable conn...

Banjo Bolt for the turbocharger oil feed pipe on the Td5 engine. This M12 x 1.0mm thread banjo bolt clamps the hollow banjo fitting of the oil sup...

Fuel Injector Pipe - Cylinder 3 forms part of the high-pressure fuel injection circuit on the 2.5L 200TDi turbo diesel engine. This rigid steel li...

Fuel Injector Pipe - Cylinder 1 forms part of the high-pressure fuel injection circuit on the 2.5L 200TDi turbo diesel engine. This rigid steel li...

Fuel Injector Pipe - Cylinder 2 forms part of the high-pressure fuel injection circuit on the 2.5L 200TDi turbo diesel engine. This rigid steel li...

Dump Valve and Bracket for the 2.5L 300 TDi and Td5 diesel engines, fitted in the engine air intake system. The assembly comprises the dump valve ...

Nutsert, M8 blind rivet nut for use where a permanent threaded insert is required and access to the reverse face of the panel or bracket is not pos...

Injector Pipe - high-pressure fuel line serving cylinder 3 within the fuel injection system of the 2.5L 300 TDi turbo diesel engine. The pipe carr...

O-Ring sealing the air filter housing to the airflow meter on V8 EFI engines. This O-ring seals the joint between the air filter housing outlet an...

Fuel Filter Banjo Bolt secures a banjo union to the fuel filter housing within the diesel fuel supply circuit. The hollow bolt allows fuel to pass...

Fuel Return Line for the TD5 2.5L 5-Cylinder Turbo Diesel engine, fitted to the Defender 90 fuel system. This hose carries surplus fuel from the h...

Diesel Fuel Filter Plug Seal - a sealing ring for the drain plug on the diesel fuel filter and sedimentor. It seals the drain/bleed plug against t...

Fuel Tank Filler Hose - moulded rubber hose connecting the filler neck to the fuel tank. Carries fuel from the filler opening down into the tank a...

Fuel Filter TD4

Hex Nut - 7/16 UNF fixing nut. Used on the fuel pipe unions of the 3.5L V8 twin-carburettor petrol engine. Also supplied as part of a service kit.

Injector Pipe Clip for the diesel fuel injection system. The clip secures and spaces the high-pressure injector pipes, damping vibration and preve...

Injector Spill Pipe links the fuel injectors in the 2.5L 4-cylinder turbo diesel injection system. It returns leak-off (spill) fuel from the injec...

Fuel Pipe Clip retains and routes fuel delivery pipework within the fuel system, holding the lines securely in their intended position. It prevent...

Flanged Nut - M6 flanged hex nut for use across a wide range of Land Rover assemblies including engine, drivetrain, body, braking, and electrical a...

Injector Pipe Kit - set of 4 high-pressure fuel pipes for the 300Tdi 4-cylinder turbo diesel engine, mechanical injection pump variant (Less EDC). ...

Fuel Injector Leak-Off Pipe Kit for the 2.4L Duratorq-TDCi Puma diesel engine, forming part of the fuel injection and return circuit. These leak-o...

Kit gasket carb for Rover V8 engines fitted with SU carburetors

Carburettor Seal Kit - SU

Injector O-Ring - a sealing ring for the fuel injectors in the electronic fuel injection system. It seals the injector where it locates in its bore...

Accelerator Cable for the 2.25L diesel engine in left-hand drive Defender 110. This cable connects the accelerator pedal to the throttle control l...

Injector Ring Seal for the Puma 2.2L TDCi 4-cylinder turbo diesel engine, seating in the injector bore in the cylinder head. The seal forms a gas-...

Carburettor for the 2.5L petrol engine, mounted on the intake manifold within the fuel delivery system. It meters and atomises fuel into the incom...

Injector Clip for V8 EFI fuel injection systems, used in the fuel delivery assembly at the intake manifold. This retaining clip secures the fuel i...

Fuel Injector delivers atomised diesel into the combustion chamber of the 2.5L 300TDi engine. Fitted to non-EGR applications.

Injector Clamp Stud - 200Tdi / 300Tdi is the threaded stud used to secure the injector hold-down clamp in the cylinder head of the 200Tdi and 300Td...

Injector Shroud fits around the fuel injector in the cylinder head of the 2.5L 4-cylinder diesel engine. It locates and seals the injector within ...

Carburettor Overhaul Kit for the 2.25L four-cylinder petrol engine. The kit renews the perishable sealing and metering components of the carburetto...

Fuel Filler Screw is a 2BA x 3/8" fastener used to secure the fuel filler fitting. It retains the fuel filler to the body panel; the companion nut...

Fuel Filter Assembly for the diesel fuel system. Mounted in the fuel feed line ahead of the injection pump, it filters particulate contamination a...

Fuel Pipe - Tap to Tank - a fuel line in the low-pressure diesel supply circuit, running between the fuel tank and the fuel tap. It carries fuel f...

Fuel Pump Gasket seals the external fuel pump to its mounting face in the fuel delivery system, preventing leakage at the joint. Used on petrol ap...

Fuel Filter Cover Assembly - front cover for the chassis-mounted fuel filter and sedimentor on diesel engines, including the 200 TDi, 300 TDi and T...

Fuel Tank Pipe - a pipe assembly within the fuel supply system, connecting to the fuel tank. It carries fuel between the tank and the adjoining fu...

Fuel Vapour Valve for the 2.4L Puma TDCi diesel engine, part of the fuel tank venting arrangement. The valve manages fuel vapour venting from the ...

Fuel Pump Cover for the Puma diesel engine. An inspection cover panel fitted to the engine front cover over the mechanical fuel pump drive area. Re...

Fuel Pipe carrying injector leak-off (spill) return from the spill rail back to the rear fuel tank, on 2.5L 4-cylinder diesel applications. It for...

Fuel Tank Bracket for the fuel tank mounting assembly on the Defender. This steel bracket secures the fuel tank to the chassis, forming part of th...

Injector Bolt for the 2.2L Td4 (Puma) diesel fuel injection system. The bolt retains a fuel injector in its bore in the cylinder head, clamping th...

Fuel Tank - 45 Litre for the fuel storage system of the Defender 110. This 45-litre tank fits the standard under-body mounting position on Defende...

Fuel Tank Sender Unit for petrol applications, mounted in the fuel tank as part of the fuel gauge circuit. A float arm rides on the fuel surface an...

Fuel Tank Mounting Spacer sits at the rear fuel tank mounting, setting the standoff between the tank mounting bolt plate and the chassis. It maint...

Fuel Tank Plug, M12 threaded, fitted to the fuel tank body. It seals a threaded port in the tank associated with the fuel pump, sender and filler ...