Land Rover Fuel System Parts

Fuel Tank Pump Sealing Ring for the fuel tank pickup and pump assembly. Seals the pump/pickup unit where it mounts to the top of the fuel tank, pr...

Injection Pump Support Bracket for the fuel injection system on the 2.5L 300 TDi turbo diesel engine. The bracket ties the injection pump to the e...

Fuel Injection Pump Plate for the 2.5L 300 TDi turbocharged diesel engine, a component of the ERR5057 mechanical injection pump within the diesel f...

Fuelinjection Pump - Recon

Fuel Stop Solenoid for the 200 Tdi and 300 Tdi 2.5L turbo diesel engine, mounted on the fuel injection pump. Held open while energised through the...

Fuel Tank Lock Ring secures the in-tank fuel pump and sender assembly to the top of the fuel tank. The ring locks down over the tank aperture, hold...

Carburettor Vent Hose for venting the carburettor float chamber on the twin-carburettor induction system. The hose connects to the float chamber v...

Cap adjusting

SU Float Needle Valve regulates the fuel level in the carburettor float chamber on the 3.5L V8 petrol fitted with SU twin carburettors. The needle...

Throttle Spring - the return spring in the throttle linkage. Acting on the throttle body spindle, it closes the throttle butterfly and returns the ...

Cold Start Solenoid for the carburettor cold-start enrichment circuit on the V8 petrol carburettor induction system. The solenoid operates the col...

Fuel Filter is the in-line filter for the pressurised supply side of the V8 EFI fuel injection system. It is mounted in the fuel line between the ...

Carburettor (left-hand) for the 3.5L V8 twin-carburettor petrol engine. The carburettor meters fuel into the incoming air stream to form the combu...

Carburettor (right-hand) for the 3.5L V8 twin-carburettor petrol engine. The carburettor meters fuel into the incoming air stream to form the comb...

Fuel Injector

Adaptor Assembly Fi

Coolant Temperature Sensor threads into the cylinder head and reports engine coolant temperature to the engine management system and the instrument...

Fuel Pipe Union Nut for the fuel delivery line. This female threaded nut draws a fuel pipe up to its mating union, clamping the pipe's flared or c...

Fuel Injector for the EFI V8 petrol engine, part of the multi-point electronic fuel injection system. The injector is an electrically-operated sol...

Fuel Injector for the fuel injection system of the 2.5L 200 TDi diesel engine. The injector atomises high-pressure diesel delivered from the injec...

Injector Sealing Washer seals each fuel injector into the cylinder head within the diesel fuel injection system, for 200 TDi and 300 TDi turbo-dies...

Fuel Injector for the 2.5L 300TDi 4-cylinder turbo diesel engine. This direct injection fuel injector delivers metered, atomised fuel into the pre...

Fuel Pump is the in-tank high-pressure pump in the fuel delivery system, mounted inside a metal fuel tank. It draws petrol from the tank and deliv...

Idle Adjusting Needle is the mixture-adjusting needle for the Zenith Stromberg CD175 constant-depression carburettor fitted to the Rover 3.5 V8. I...

Throttle Disc is the throttle butterfly for the Solex carburettor, operating in the air and fuel induction system. Mounted on the throttle spindle...

Linkage

Needle Valve Kit Float-chamber needle valve and seat for the Zenith Stromberg 175CD carburettor, fitted to the 3.5L V8 petrol engine. The needle v...

Fuel Filter Centre Bolt for the diesel fuel filter and sedimentor assembly. This through-bolt clamps the filter bowl and element onto the filter h...

Fuel Pipe Assembly - part of the fuel delivery circuit for the carburettor V8. It carries fuel from the fuel supply line to the SU carburettors, fe...

Injector Dowel Ring for the fuel injection system of the 2.5L 200 TDi engine. This locating dowel positions the injector correctly in the cylinder...

EGR Pipe Hose for the 2.5L 300TDi 4-cylinder turbo diesel engine. This rubber hose forms part of the exhaust gas recirculation (EGR) circuit, conn...

Copper Sealing Washer - a crush washer used to seal banjo and union connections throughout the diesel fuel system, at fuel pipes, filters and sedim...

Fuel Pipe Olive is a compression ferrule used to seal a rigid fuel pipe union. The olive is compressed onto the pipe by the union nut to form a le...

Carburettor Needle is the tapered metering needle that sets the fuel mixture in the carburettor. The needle moves within the jet to control fuel d...

Cold Start Injection Hose - part of the fuel injection system, within the injector and pipe assembly. It feeds fuel to the cold start injector, whi...

Throttle Cable connects the accelerator pedal to the carburettor throttle linkage, transmitting pedal movement to open and close the throttle. Thi...

Carburettor Needle for the SU variable-venturi carburettor in the fuel system of the 3.5L V8 petrol engine, in twin-carburettor configuration. The...

Fuel Injector for the fuel injection system of the 2.5L 200 TDi diesel engine (reconditioned). The injector atomises high-pressure diesel delivere...

Fuel Spill Pipe forms part of the fuel injection system on the 2.5L 200TDi turbo diesel engine. It links the injector leak-off unions, collecting ...