Land Rover Fuel System Parts

Tank Unit

Strap Assembly - Fuel Tank

Fuel Pump is the in-tank high-pressure pump in the fuel delivery system, mounted inside a metal fuel tank. It draws petrol from the tank and deliv...

Throttle Body and Motor for the engine intake assembly on the 3.0L V6 Diesel Gen 2 engine. This assembly houses the throttle valve and its integra...

Idle Adjusting Needle is the mixture-adjusting needle for the Zenith Stromberg CD175 constant-depression carburettor fitted to the Rover 3.5 V8. I...

Vacuum Advance Hose for the carburettor-fed 2.25L 4-cylinder petrol ignition system. This hose carries ported vacuum from the carburettor to the d...

Fuel Burning Heater Pump Metering fuel pump for the auxiliary Fuel Burning Heater (FBH). The FBH is a supplementary diesel-fired heater that warms...

Throttle Disc is the throttle butterfly for the Solex carburettor, operating in the air and fuel induction system. Mounted on the throttle spindle...

Fuel Shut-Off Switch for the Td5 diesel fuel system - an inertia-operated safety switch wired into the fuel pump supply circuit. In the event of a...

Fuel Pipe - Accumulator To Filter is a formed rigid fuel line in the V8 fuel injection supply circuit. It carries pressurised fuel from the outlet...

Linkage

joint washer, various applications, mostly BMW engines. L322 - Oil Pan/Oil Level Indicator M62 B44 4.4 V8 Petrol L322 - Oil Pan/Oil Level Indicato...

Volume Control Screw for the Zenith 36 IV carburettor. This spring-loaded idle mixture screw adjusts the volume of the idle circuit, setting the ai...

Inlet Manifold Seal seals the joint between the inlet manifold and the throttle body within the air intake system. Fitted to the 2.2L TDCi (Td4) d...

Fuel System Ring - O-ring seal for the fuel injection pump on the 2.2L Puma diesel engine. The O-ring seals a joint on the fuel injection pump bod...

Fuel Tank Suction Pipe for the under-seat fuel tank. The pipe forms the tank-side pickup of the fuel supply circuit, drawing fuel from within the t...

Fuel Sediment Bowl for the fuel system on Series II, IIA, and III Land Rovers, including the 101 Forward Control. The glass bowl mounts below the f...

Needle Valve Kit Float-chamber needle valve and seat for the Zenith Stromberg 175CD carburettor, fitted to the 3.5L V8 petrol engine. The needle v...

P-Clip for routing and securing engine-bay pipework. Clamps the fuel pipes of the 4-cylinder carburettor petrol engine and the evaporative loss (E...

Fuel Filter Element - the replaceable filtration element in the diesel fuel supply circuit. Fitted to the 3.6L V8 TDV8 (Lion) diesel engine, the e...

Fuel Filter Centre Bolt for the diesel fuel filter and sedimentor assembly. This through-bolt clamps the filter bowl and element onto the filter h...

Service Filter Kit - a combined filter kit for a major scheduled service of the 2.7L TDV6 diesel engine. It brings together the routine service fi...

O-Ring - Fuel Injector - Diesel - sealing ring in the fuel injector and pipe assembly on diesel engines. The ring seals the injector joint against...

Fuel Injection Pump Drive Belt for the 2.0L 8-valve four-cylinder diesel engine. It drives the fuel injection pump from the engine belt drive, keep...

Fuel Injector - fuel injection system, cylinder head. Td5 2.5L 5-cylinder turbo diesel. The Td5 uses electronic unit injectors: each injector sits...

Primary Fuel Filter - diesel fuel supply circuit, mounted in-line in the fuel lines between the tank and the engine. As the first filtration stage...

Hand Throttle Control Cable for the Defender, allowing the driver to set and hold a fixed engine speed independently of the accelerator pedal. The...

Fuel Pipe Assembly - part of the fuel delivery circuit for the carburettor V8. It carries fuel from the fuel supply line to the SU carburettors, fe...

Fuel Tank Sender Unit for the Defender Pick-Up auxiliary fuel tank. The sender unit mounts inside the fuel tank and uses a float-operated potentio...

Metering Valve for the fuel injection system of the 4.4L V8 TDV8 diesel engine. Mounted on the high-pressure fuel pump assembly, the metering valv...

EGR Cooler Gasket - seals the exhaust gas recirculation (EGR) cooler to its mating flange in the EGR circuit, preventing leakage of recirculated ex...

Injector Dowel Ring for the fuel injection system of the 2.5L 200 TDi engine. This locating dowel positions the injector correctly in the cylinder...

EGR Pipe Hose for the 2.5L 300TDi 4-cylinder turbo diesel engine. This rubber hose forms part of the exhaust gas recirculation (EGR) circuit, conn...

Glow Plug for the 2.2L Td4 diesel engine. Fitted to the cylinder head, it pre-heats the combustion chamber to aid cold starting and is controlled ...

Glow Plug for the 2.2L Td4 diesel engine. Fitted to the cylinder head, it pre-heats the combustion chamber to aid cold starting and is controlled ...

Fuel Rail Pressure Sensor for the 4.4L V8 TDV8 diesel engine, fitted within the high-pressure common-rail fuel injection system. The sensor monito...

Joint Washer sealing the carburettor to the inlet manifold on the Stage 1 V8. Forms the gasket joint between the carburettor base and the manifold...

Copper Sealing Washer - a crush washer used to seal banjo and union connections throughout the diesel fuel system, at fuel pipes, filters and sedim...

Pipe - Fuel

2.2L diesel 16V

Fuel Filter Element - the in-line fuel filter element on the front fuel supply lines. It removes particulate contamination from the diesel supply ...

Fuel Pipe Olive is a compression ferrule used to seal a rigid fuel pipe union. The olive is compressed onto the pipe by the union nut to form a le...

Fuel Injector Pipe Clamp for the fuel injection system on the 2.2L TD4 Diesel. This clamp secures and locates the fuel injector pipe, retaining it...

Bolt - a small-diameter bolt with a 2BA (British Association) thread and a 5/8" length. Used as a light-duty fixing for small fittings and electric...

Water Detector senses water that has collected in the fuel filter within the fuel filtration assembly. Diesel fuel carries water that the filter s...

Fuel Tank Outrigger is a rear chassis outrigger forming part of the body & chassis assembly. It welds to the main chassis rail to support the ...

Valve - Control

Genuine Accelerator Lever 1964-83.