Land Rover Fuel System Parts

Accelerator Cable for the 200TDi throttle linkage. The cable runs from the accelerator pedal to the throttle lever on the fuel injection pump. Dep...

Fuel Filter & Sedimentor Assembly - Td5

Inline Fuel Filter for petrol fuel-injection (EFI) systems, fitted in the pressurised fuel supply line between the fuel pump and the injector rail....

Fuel Filler Hose in the fuel tank filler assembly, connecting the filler neck to the tank. It carries fuel from the filler neck into the tank duri...

Fuel Lift Pump for the low-pressure fuel supply circuit of the 2.5L 300TDi turbo diesel engine. This engine-mounted mechanical diaphragm pump draw...

Fuel Stop Solenoid for the 200 Tdi and 300 Tdi 2.5L turbo diesel engine, mounted on the fuel injection pump. Held open while energised through the...

Copper Sealing Washer used to seal a threaded or banjo joint in the fuel and lubrication circuits. The soft copper deforms under tightening to con...

Sealing Washer for the carburettor choke switch on petrol engine applications. Fitted at the choke switch, it seals the joint at the fitting to pr...

Service Kit - 300TDi for Land Rover Discovery 1 and Range Rover Classic with the 300Tdi 2.5L turbodiesel engine. This kit consolidates the key ser...

Air cleaner element installed in the air cleaner housing of the engine intake system, where it filters incoming air before it enters the intake duc...

Hose Clamp secures a flexible hose onto a rigid spigot or stub and seals the joint against leakage. It belongs to the hoses and connections group. ...

Hex-head screw, 5/16" UNF thread, 1-1/4" long. Unified Fine (UNF) thread form with a hexagonal head for use with standard imperial spanners and so...

Fuel Pump Rubber Mount for the fuel delivery system. This rubber mounting carries the external electric fuel pump and isolates it from the chassis,...

Single Pipe Clip, a routing clip that retains a single pipe or line against the chassis or body. It holds fuel, evaporative-loss or brake pipework...

Accelerator Cable for the 300 Tdi 2.5L turbo diesel in left-hand-drive configuration. The cable links the accelerator pedal to the throttle lever ...

Accelerator Cable for the throttle linkage of the 3.5L V8 petrol carburettor engine. The cable transmits accelerator pedal movement to the carburet...

Fuel Filter for the diesel fuel supply system of the 2.2L DW12 common-rail direct-injection turbo diesel engine. It is fitted in the fuel line betw...

Injector Leak-Off Pipe for the 2.25L and 2.5L naturally-aspirated diesel fuel injection circuit. This spill-return pipe connects the return unions ...

Fuel Cap - Extra Tank - Military

Fuel Filler Cap - the cap that closes and seals the fuel tank filler neck. It screws onto the filler neck to seal the fuel system, retaining fuel ...

Fuel Pipe from the Td5 2.5L 5-cylinder turbo diesel fuel system, running on the low-pressure side between the inline fuel filter and the pump. It ...

Fuel Feed Pipe for the diesel fuel supply system, routing fuel from the tank toward the engine. It forms the feed leg of the fuel delivery circuit...

Fuel Tank Assembly is the main fuel storage vessel of the fuel system. It holds the fuel supply and feeds it to the fuel pump and delivery lines, ...

Fuel Pipe Double Clip for routing the fuel lines in the fuel delivery system. Retains a pair of fuel pipes along their run, holding them against t...

Injection Pump Gasket seals the fuel injection pump to its mounting face on the timing case of the 200Tdi and 300Tdi 2.5L turbo diesel engines. Th...

Pipe Clip, a routing clip that retains pipework and small-bore lines against the chassis, body or transmission casing. It supports breather, fuel,...

Injector Pipe - the high-pressure fuel line serving the No.4 cylinder on the 2.25L diesel. It carries metered fuel from the injection pump outlet ...

Injector Pipe No.2, a high-pressure delivery pipe in the diesel fuel injection system. The rigid steel pipe carries fuel under high pressure from ...

Fuel Pipe Olive for the fuel supply line. The olive is the compression ferrule that seats between the fuel pipe and its union fitting. When the un...

Spring Washer is an M8 double-coil spring washer used as a fastening component in body and chassis assemblies. The double-coil spring form maintai...

Washer used at multiple points within the manual gearbox assembly, including the main casing, extension housing, oil pump and speedometer drive hou...

Service Kit - 300TDi for Land Rover Discovery 1 and Range Rover Classic with the 300Tdi 2.5L turbodiesel engine. This kit consolidates the key ser...

Accelerator Rod Ball Joint forms an articulated pivot in the accelerator (throttle) control linkage, joining adjacent sections of the accelerator r...

Bolt M8 X 16 HTSETS 8.8 S/COL sold EACH

Hose Clamp - 8-16mm A worm-drive hose clamp with an adjustable 8-16mm clamping range, used to secure a small-bore flexible hose onto its spigot or ...

Tank Unit Screw is the slotted cheese-head securing screw for the fuel-tank sender unit. It clamps the fuel-level sender flange down onto the top ...

Banjo Bolt (6mm) for the fuel injector leak-off return circuit on the 200TDi and 300TDi 2.5L turbo diesel engines. The hollow bolt clamps the inje...

Auxiliary Fuel Tank for the fuel storage system, in the original military pattern. This under-seat auxiliary petrol tank supplements the main fuel...

Accelerator Cable Assembly connects the accelerator pedal to the fuel injection pump throttle lever. It transmits movement of the pedal to the inj...

Injector clamp bolt 2.4 Puma

Carburettor Gasket - a sealing gasket for the Zenith-Stromberg 175CD carburettor as fitted to the 3.5 litre V8. It seals a joint within the carbur...

Carburettor Repair Kit for the six-cylinder petrol engine carburettor, supplying the renewable service parts used to overhaul the carburettor.

Fuel Filter Assembly for the Td5 2.5L 5-cylinder turbo diesel fuel system. It filters the diesel supply between the tank and the injection system,...

Suitable for Fitment All diesel models from (VIN) 7A000001 on

Fuel Pressure Regulator mounts on the fuel rail of the multiport electronic fuel injection (EFI) system. It holds a constant pressure difference b...

Fuel Pump & Sender Unit - the in-tank fuel delivery and level-sensing assembly for the V8 petrol EFI/MPI fuel system, fitted to plastic fuel ta...

Electric Fuel Pump mounted externally in the fuel supply system, drawing petrol from the tank and delivering it to the carburettor. This is an ext...

Fuel Filler Tube forming the neck of the fuel tank filler system. It carries fuel from the filler cap opening down into the tank during refuelling...