Land Rover Fuel System Parts

Fuel Connector Block for the Td5 2.5L 5-cylinder turbo diesel engine (Euro III, later specification). The block is the central junction of the fuel...

Fuel Pipe Assembly forming the vent lines of the Td5 2.5L 5-cylinder turbo diesel fuel system. The vent pipework carries fuel vapour away from the...

Fuel Pump & Sender - in-tank low-pressure fuel pump and fuel level sender assembly for the Td5 2.5L 5-cylinder turbo diesel. The unit mounts v...

Fuel Tank Cradle from the rear fuel tank mounting - the steel support frame that carries the classic-pattern plastic fuel tank beneath the chassis....

Fuel Pump Seal for the fuel tank sender unit. This seal seats at the mounting flange of the fuel pump and sender unit where it interfaces with the ...

Fuel Tank for the V8 EFI petrol fuel storage system. This multi-vent tank assembly holds the vehicle's petrol supply and feeds the fuel delivery ci...

Fuel Tank Bolt - a mounting bolt that secures the fuel tank to the chassis. It fixes the tank at its mounting point and is specified for the metal...

Fuel Tank Bracket for securing the fuel tank to the vehicle chassis. This metal bracket forms part of the fuel tank mounting assembly, locating an...

Fuel Tank Vent Hose - part of the fuel tank ventilation circuit on Puma TDCi models. It carries fuel vapour from the tank, allowing the tank to br...

Injector Pipe - No.4 is a high-pressure fuel line in the injection system of the 2.5L 4-cylinder diesel engine. It forms part of the set of rigid ...

Injector Pipe - No.3 for 2.5L naturally aspirated diesel and 2.5L turbo diesel engines. This high-pressure steel fuel pipe routes fuel from the me...

Injector Pipe - No.2 for 2.5L naturally aspirated diesel and 2.5L turbo diesel engines. This high-pressure steel fuel pipe routes fuel from the me...

Injector Pipe - No.1 for 2.5L naturally aspirated diesel and 2.5L turbo diesel engines. This high-pressure steel fuel pipe routes fuel from the me...

Fuel Pump & Sender Unit - the in-tank fuel delivery module for petrol V8 EFI applications, combining the electric fuel pump and the fuel-level ...

Sealing Washer is a copper crush washer used to seal banjo and threaded union joints in the fuel system. Fitted at unions such as the injection pu...

Diesel Injector for the fuel injection system, delivering metered, atomised fuel from the injection pump into the engine. Fitted to the 2.25L and ...

Carburettor Torsion Spring is the return spring fitted to the throttle linkage of the Zenith carburettor on the 2.25L four-cylinder petrol engine. ...

Carburettor Spring - Solex - a spring used in the Solex carburettor of the 2.25 litre petrol engine, part of the fuel system. It supplies the spri...

Banjo Bolt

Return Spring for Series hydraulic actuator and throttle control assemblies. This spring serves as a return spring in the hydraulic actuator assem...

Fuel Filter Holder - With Filter for the Defender Puma diesel fuel system. This complete filter assembly mounts in the engine bay fuel circuit and...

Fuel Filler Grommet seals the joint between the fuel tank filler neck and the body aperture, within the fuel filler assembly. The rubber grommet l...

Fuel Tank Breather Hose for the fuel filler and tank ventilation circuit. Connects the fuel tank to the filler neck, venting the tank so that air ...

Fuel Tank Cradle - the support cradle that carries the fuel tank beneath the vehicle, bolting to the chassis to hold and locate the tank. Heavy-du...

Carburettor Float for the Zenith 361V carburettor, part of the Fuel System assembly on Series petrol engines. The float rides on the fuel surface ...

Bolt - a hexagonal-head bolt with an M10 metric thread and a 30 mm length. A common general-purpose fastener used at fixing points across the suspe...

Rear Fuel Tank Assembly is the main fuel storage vessel of the fuel system, mounted at the rear of the vehicle. It holds the fuel supply and feeds...

Sediment Retainer for the fuel lift pump glass sediment bowl - the clamp that secures the glass bowl to the underside of the pump. It holds the bo...

Filter Kit - 2.2 & 2.4 TDCi for the Land Rover Defender with the Puma TDCi diesel engine. This kit consolidates the main filter and sealing it...

Fuel Return Hose forms part of the fuel return line on the 2.2L Puma TDCi diesel engine. It carries surplus fuel from the injection system back to...

Fuel block connector assembly (+hoses) TD5 L318;L316

Fuel Filler Hose connecting the external fuel filler neck to the fuel tank on the Defender. This rubber hose forms the sealed connection between t...

Fuel Tank Bolt - shouldered mounting bolt in the fuel tank support assembly, securing the tank mounting to the chassis outrigger. The plain should...

Washer - Diesel Sedimentor is a sealing washer used in the diesel fuel sedimentor (fuel filter/water separator) assembly on diesel-engined Land Rov...

Banjo Bolt is a hollow union bolt used in the fuel system of the 200 Tdi and 300 Tdi engines. It secures a banjo hose fitting at the injection pum...

In-Tank Fuel Pump & Sender Unit for Range Rover P38A petrol applications. This combined assembly houses the electric fuel pump and fuel level s...

Bolt Fixing bolt, 3/8" UNF x 2-1/2", used to secure the rear fuel tank to the chassis.

Carburettor Float Assembly regulates the fuel level in the float chamber of an SU carburettor, governing the fuel available to the metering needle ...

Hose Clamp with a 10-16 mm clamping range. Used to secure rubber hoses at cooling, fuel, and fluid circuit connections on Land Rover vehicles.

Washer for the under-seat fuel tank front mounting assembly. This special-profile washer provides a secure bearing face at the front attachment po...

Fuel Tank Bolt secures the front mounting of the fuel tank to the chassis, for tanks mounted beneath the front seat. It clamps the tank's forward ...

Spring Washer for the fuel tank sender unit and fuel pick-up pipe fixings. Fitted beneath the retaining screws that secure the fuel gauge sender u...

Union Nut for the diesel fuel filter housing, part of the fuel supply circuit. The union nut secures a fuel feed pipe union to the filter housing,...

cable from accelerator pedal to cross shaft on military Series 3 diesel models

Fuel Spill Pipe for the 200 TDi diesel injection system, part of the injector leak-off (spill return) circuit. The pipe links the injector leak-of...

Fuel Hose for the 3.5L V8 twin-carburettor engine, part of the carburettor fuel supply plumbing. It connects the fixed points in the fuel feed lin...

Gasket kit carburettor Zenith Stromberg 175CD

Accelerator Cable in the throttle control linkage, connecting the accelerator pedal to the carburettor throttle spindle. Transmits pedal movement ...