Land Rover Fuel System Parts

Fuel Pipe Sealing Washer seals the fuel pipe union at the DPA diesel injection pump. Fitted at the union connection, it is compressed between the ...

Fuel Pipe - Filter to Injection Pump for the Defender 300TDi 2.5L diesel (non-EGR). This pipe carries filtered diesel from the fuel filter housing...

Coolant Hose connecting the radiator to the fuel cooler within the engine cooling circuit. It routes engine coolant to the coolant-cooled fuel coo...

Fuel filler seal RRC

Fuel Filter Head is the housing top of the fuel filter assembly within the diesel fuel supply system, onto which the filter element mounts. The he...

Fuel Vapour Valve for the 2.4L Puma TDCi diesel engine, part of the fuel tank venting arrangement. The valve manages fuel vapour venting from the ...

Fuel Filter Element for the diesel fuel supply system. The element removes particulate contamination and separates water from the fuel before it re...

Fuel Temperature Sensor for the EFI V8 petrol engine, part of the electronic fuel injection management system. The sensor measures the temperature...

Fuel Cut-Off Switch Fuel stop solenoid switch mounted on the diesel injection pump, controlling fuel flow into the pump's metering circuit. When d...

Fuel Leak Off O-Ring seals the leak-off (spill return) connection at a diesel fuel injector. It sits in the injector leak-off circuit that collect...

Fuel Filler Hose

Fuel tank filler hose pipe

Past op 90 2.5L TD5 diesel modellen vanaf (VIN) WA159807 on

Fuel Pump is a low-pressure in-tank unit forming part of the fuel delivery system on petrol applications. Mounted inside the fuel tank, it acts as...

Fuel Tank Sender is the in-tank fuel level sensing unit within the fuel gauge circuit, for V8 applications. Mounted inside the fuel tank, a float ...

Fuel return tube O-ring seal

Pump Injection Ring

Fuel Filler Neck Seal for the fuel filler assembly on the Defender. This rubber seal fits at the joint of the fuel filler neck, sealing the connec...

Fuel Injector for the EFI V8 petrol engine, part of the multi-point electronic fuel injection system. The injector is an electrically-operated sol...

Accelerator Cable - throttle cable for TDi diesel applications. It connects the accelerator pedal to the injection pump throttle lever, transmitti...

Fuel Tank Sender for the rear-mounted fuel tank on long-wheelbase diesel applications. The sender unit fits into the top of the fuel tank, where a...

Fuel Filler Breather Hose, part of the fuel filler and tank ventilation system. The hose vents air displaced from the fuel tank during refuelling,...

Fuel Tank Mounting Washer is used at the fuel tank mounting points, spreading the clamping load of the fixing across the mounting bracket or strap....

Bolt securing the fuel injector and high-pressure fuel pipe assembly on the engine fuel system. It clamps the injector and high-pressure pipe unio...

MAP Sensor (Manifold Absolute Pressure sensor) for the engine management system, mounted on the throttle housing. It measures the absolute pressur...

Fuel Tank Drain Plug - the threaded plug that seals the drain point at the base of the fuel tank. Removing it allows the tank to be drained for se...

Fuel Connector Block Gasket for the Td5 2.5L five-cylinder diesel engine, sealing the fuel connector block to the engine within the fuel pressure r...

O-Ring for the fuel injector harness assembly on the Td5 2.5L 5-Cylinder Turbo Diesel engine. This O-ring provides a seal within the fuel injector...

Service Filter Kit for the 300 Tdi 2.5L turbo diesel engine, grouping the consumable filters and sealing washers required for a routine engine serv...

Fuel Tank Outrigger is a rear chassis outrigger forming part of the body & chassis assembly. It welds to the main chassis rail to support the ...

Fuel Tank Outrigger - front right-hand chassis outrigger supporting the fuel tank on the short-wheelbase 88" chassis. Welded to the chassis frame,...

Fuel Tank Vent Hose - part of the fuel tank ventilation circuit, allowing the tank to breathe and equalise internal pressure as fuel level and temp...

Fuel Pump Drive Belt Kit for the 3.0L V6 diesel engine, renewing the belt that drives the high-pressure fuel pump at the rear of the engine. The k...

Hose - Filler Pipe

Accelerator Rod in the throttle linkage. This rigid rod transmits accelerator pedal movement through the linkage to operate the engine throttle.

Fuel Filter for the diesel fuel supply system — the cartridge that cleans fuel on its way to the injection pump. The filter traps particulate cont...

O-Ring for the Zenith carburettor, part of the Fuel System assembly on the 2.25L 4-cylinder petrol engine. This O-ring provides a fluid-tight seal...

P-Clip - 19/64" x 3/8" is a pressed-steel P-profile retaining clip used to route and secure fuel lines, brake pipes, or wiring looms against a chas...

Bolt - M8 x 40mm standard metric hex-head fastener for use across engine, gearbox, body, and chassis assembly applications.

Fuel Pipe - Cylinder No.4 for the 200TDi 2.5L four-cylinder turbodiesel, part of the high-pressure fuel injection circuit. This steel injection pi...

Switch - Fuel Tank Tap is an electrical switch used to operate the fuel tap selection on Land Rover Series I, Series II, Series IIA, and Series III...

Injector Pipe - No.4 is a rigid high-pressure fuel line in the injection circuit of the 2.5L 300 TDi turbo diesel engine. It carries metered fuel ...

Carburettor Throttle Linkage Roller for the 3.5L V8 twin-carburettor petrol engine. It runs on the throttle countershaft, guiding the carburettor ...

cable choke S3 - Right Hand Drive 2.25L 4-cylinder petrol fitted with steering column lock, - Left Hand Drive 2.6L 6-cylinder petrol fitted with s...

Fuel Injector Bolt - retaining bolt securing the fuel injector clamp to the cylinder head on the 2.4L Duratorq TDCi (Puma) common-rail diesel engin...

Ball Joint - Accelerator Linkage is a mechanical pivot joint used in the accelerator linkage assembly. This ball joint connects articulating rods ...

Fuel Pump Adaptor for mounting the external fuel pump on petrol engines. It provides the interface between the external fuel pump and its mounting...

Olive compression ferrule for a pipe union. The olive seats between the pipe and the union nut, forming a compression seal at the joint as the nut...