Range Rover L322 Parts

O-Ring seals the variable valve timing (VVT) solenoid within the timing gear and sprocket assembly. It maintains an oil-tight joint between the VV...

Inlet Manifold Gasket - 5.0 V8 - RH seals the inlet manifold to the cylinder head on the right-hand bank of the 5.0 litre V8 petrol (AJ133) engine,...

Sensor

Crankcase Breather Hose forms part of the crankcase emission control (ventilation) system on the 4.4L V8 AJ petrol engine. It carries crankcase bl...

Spark Plug Aperture Gasket for the right-hand camshaft cover, sealing the spark plug well against oil ingress. The camshaft cover carries a tube f...

Idler Pulley for the front-end accessory drive of the 4.4L V8 diesel engine. The idler pulley provides a smooth rolling surface that routes and gu...

Gasket - Oil Filter to Block seals the joint between the oil filter housing and the cylinder block, within the Oil Cooler and Filter assembly. It ...

Hex Head Nut - M14 x 70mm. Crankshaft pulley fixing. It secures the crankshaft pulley and drive-belt assembly at the crankshaft nose, seating agai...

Secondary Drive Belt from the front end accessory drive, 1444 mm in length and eight-ribbed. It runs from the crankshaft pulley over the tensioner...

Windscreen Wiper Arm for the front wiper assembly. This arm carries the wiper blade across the windscreen, driven from the wiper motor and linkage...

Exhaust Manifold Gasket - left-hand side seals the exhaust manifold against the cylinder head face on the left-hand bank of the engine. It contain...

Coolant Hose from the engine cooling circuit of the naturally aspirated 5.0L V8 petrol engine (AJ133). This is the upper hose in the engine-to-rad...

Rear Reflector for the left-hand side of the rear lighting assembly. This is a passive red reflector that returns light from the headlamps of foll...

Air Conditioning O-Ring - a sealing ring for the air conditioning refrigerant circuit. It seals the joints between refrigerant lines and component...

Intake Manifold Gasket - RH seals the intake (inlet) manifold to the cylinder head on the right-hand bank of the 3.6L V8 TdV8 (Lion) turbo-diesel e...

Breather Tube - crankcase ventilation tube within the engine's emission control system. It routes crankcase gases from the engine back into the in...

Wiper Arm - front windscreen wiper arm for the passenger side on left-hand drive vehicles, part of the front wash/wipe system. The arm locates on ...

Cam Cover Gasket for the right-hand cylinder head of the 5.0L AJ133 V8 petrol engine, part of the camshaft cover assembly. The gasket seals the jo...

Timing Tensioner Screw - M8 x 45mm is the fastener that secures the chain tensioner within the timing gear assembly of the 5.0 litre V8 petrol (AJ1...

Gasket - Oil Cooler seals the engine oil cooler to its mounting face, within the Oil Cooler and Filter assembly. It maintains the integrity of the...

O-Ring for the oil pump outlet tube, sealing the pressurised feed within the oil pump, sump and filter assembly. The outlet tube carries oil from ...

Timing Gear Bolt from the engine timing drive, securing the camshaft sprocket and variable camshaft timing adjuster to the camshaft. It provides t...

O-Ring, 11mm - a sealing ring used in the power steering hydraulic circuit, at the union joints of the pressure supply and return hoses. It seats ...

Water Manifold Gasket for the engine cooling and heater circuit - it seals the water manifold tube where it leaves the cylinder block and feeds the...

Crankcase Breather Tube - a hose in the crankcase emission control (crankcase ventilation) system on petrol engines. The tube routes blow-by gases...

Pin, 6 x 36mm, from the timing gear and auxiliary drive assembly of the 5.0L AJ133 V8 petrol engine. It serves as the guide pin for the auxiliary ...

Heater Hose - coolant hose serving the cabin heating circuit on the 3.6L V8 32V DOHC EFi diesel (Lion TDV8). It forms part of the coolant path bet...

Crankshaft Front Oil Seal for the timing gear cover, sealing the crankshaft nose where it passes out through the front cover. It runs on the crank...

Front Brake Caliper Attachment Kit supplying the pad-retaining and caliper attachment hardware that secures the brake pads in the front caliper bod...

Pulley - Fan

Blind Anchor Nut - a threaded anchor nut that provides a captive fixing point where the reverse side of the panel is inaccessible. It is used in t...

Plate

Thermostat for the AJ-V8 petrol engine cooling circuit. The thermostat regulates coolant flow between the engine and radiator. It stays closed dur...

Oil Cooler & Filter Gasket - sealing gasket for the engine oil cooler and filter assembly on the 3.6L TDV8 diesel (Lion) engine. It seals the ...

Coolant Hose - moulded hose in the engine cooling system pipes and hoses assembly. Runs between the coolant mixing valve and the upper radiator ho...

Wiring Harness for the power deployable running board (side step) accessory, part of the lower body guards and shields installation. The harness l...

Intercooler to Inlet Manifold Gasket from the charge air induction system of the supercharged 5.0L V8 petrol engine (AJ133). The supercharger and ...

Glass - Rear View Outer Mirror

Kit - Caliper Brake Pad

Glass - Rear View Outer Mirror

Clip for the cowl panel. Secures the cowl panel and associated trim at the base of the windscreen, retaining the panel to the body.

Fuel Injector Pressure Sensor - high-pressure fuel rail sensor in the direct-injection fuel supply circuit. It measures the fuel pressure in the i...

Rear Reflector, Right-Hand Side - a passive reflex reflector in the rear lighting assembly. Reflects light from following vehicles to improve rear...

Spark Plug for the 4.4L V8 and 4.2L supercharged V8 petrol engines. It ignites the air/fuel mixture in the combustion chamber. One spark plug is r...

Rear wiper arm with integrated washer jet, part of the tailgate wash/wipe system. The arm mounts on the splined rear wiper motor spindle and carri...