Range Rover L322 Parts

Inlet Manifold Air Duct - routes charge air into the inlet manifold as part of the engine air intake, carrying incoming air from the intake system ...

Flanged Hex Bolt M10 x 25mm - a threaded fastener used in the engine timing gear and turbocharger mounting assemblies. The integral flange under t...

EGR Sealing Ring for the 3.6L V8 diesel engine (TdV8), used at a pipe joint in the exhaust gas recirculation (EGR) system. This O-ring, 31.03 x 3....

Fuel Injection Pump Gasket for the 3.6L V8 diesel engine (TdV8), sealing the high-pressure fuel injection pump to its mounting on the engine. It f...

EGR Outlet Pipe Gasket for the 3.6L V8 diesel engine (TdV8), used in the exhaust gas recirculation (EGR) system. It seals the outlet pipe joint of...

Turbocharger Oil Return Tube Gasket for the 3.6L V8 turbo-diesel (TdV8) engine. It seals the joint at the turbocharger oil return (drain) tube, whe...

Exhaust Manifold Gasket for the exhaust side of the engine, sealing the turbocharger joint on the right-hand bank. It seals the flanged connection...

Exhaust Manifold Gasket for the exhaust side of the engine, sealing the turbocharger joint on the left-hand bank. It seals the flanged connection ...

Crankcase Ventilation Valve (PCV valve) for the crankcase emission control system. It regulates the flow of blow-by gases from the crankcase into ...

Mass Air Flow Sensor is fitted in the air cleaner assembly of the 4.4L DOHC V8 diesel engine, downstream of the air filter. It measures the mass o...

EGR Valve Control - vacuum control valve in the exhaust gas recirculation (EGR) system. Regulates the vacuum signal that operates the EGR valve, c...

Bolt - Hex Head is a flanged hex-head bolt, M14 x 70mm, used to secure the crankshaft pulley. It retains the pulley on the crankshaft within the d...

Oil Cooler Seal seals within the oil cooler and filter assembly. It forms the oil-tight joint at the oil separator on the 3.6L V8 diesel engine, p...

Ignition Coil for the 5.0L V8 petrol engine (AJ133), part of the ignition coil and spark plug assembly. This is a coil-on-plug unit: it mounts dir...

Timing Cover Gasket sealing the front timing cover to the cylinder block on the 4.4L AJ V8 petrol and 4.2L V8 supercharged engines. The gasket sea...

Lower Timing Cover Gasket - sealing gasket for the joint between the lower timing cover and the cylinder block on the AJ-series 4.4L V8 and 4.2L su...

Gasket - Cylinder Head

Rear Crankshaft Oil Seal and Retainer for the 3.6L V8 TDV8 (Lion) diesel engine. Fitted at the flywheel end of the crankshaft, this seal-and-retai...

Intake Manifold Gasket - LH seals the intake (inlet) manifold to the cylinder head on the left-hand bank of the 3.6L V8 TdV8 (Lion) turbo-diesel en...

Oil Filter Element - cartridge-type engine oil filter element for the oil cooler and filter assembly. The element installs into the filter housing...

Idler Pulley - Drive Belt guides the accessory drive belt around its path at the front of the engine, mounted on the alternator bracket. The freel...

Drive Belt Tensioner for the front-end accessory drive of the 4.4L V8 petrol and 4.2L V8 supercharged engines. The tensioner consists of a spring-...

Lower Timing Cover Gasket - sealing gasket for the joint between the lower timing cover and the cylinder block on the AJ-series 4.4L V8 and 4.2L su...

Coolant Temperature Sensor - engine coolant temperature sensor for the AJ-series 4.4L V8 and 4.2L supercharged V8 petrol engines. The sensor is a ...

Rear Crankshaft Seal and Retainer - the rear main oil seal supplied complete with its retainer housing, sealing the crankcase at the transmission e...

Inlet Manifold Gasket sealing the inlet manifold to the cylinder head. Seals the charge-air path between the manifold and the head on the 2.0L Td4...

Timing Cover Gasket sealing the front timing cover to the cylinder block on the 4.4L AJ V8 petrol and 4.2L V8 supercharged engines. The gasket sea...

Timing Cover Gasket sealing the front timing cover to the cylinder block on the 4.4L AJ V8 petrol and 4.2L V8 supercharged engines. The gasket sea...

Cylinder Head Gasket for the 4.4L V8 diesel engine, right-hand cylinder head. It seals the joint between the cylinder head and the engine block, co...

Piston Ring Set for the 4.4L M62 V8 petrol engine, standard size, grade 0. The rings seal the combustion chamber against the cylinder bore, transf...

Manifold Absolute Pressure (MAP) Sensor - measures the pressure inside the intake manifold and supplies an engine-load signal to the engine control...

Piston Assembly for the 3.0L M57 D30 6-cylinder diesel engine, standard size. The piston transfers combustion pressure to the connecting rod and, ...

Crankshaft Seal & Retainer – Rear is the rear main oil seal together with its carrier plate, mounted to the rear face of the cylinder block on ...

O-Ring Seal for the cylinder head cover on the AJ-V8 4.4L petrol and 4.2L supercharged petrol engines. The seal locates in the groove of the cylin...

O-Ring Seal for the cylinder head cover on the AJ-V8 4.4L petrol and 4.2L supercharged petrol engines. The seal locates in the groove of the cylin...

Cylinder Block Cover - Water Jacket - coolant galley cover for the M62 4.4L V8 petrol engine. Sits in the engine valley between the two cylinder b...

Silicone Turbo Hose Kit for the charge-air circuit on the 3.6L TdV8 diesel. Carries pressurised air between the turbochargers, the intercooler and...

Oil Pump for the engine lubrication system. It draws oil from the sump and pressurises it through the lubrication circuit to the engine's bearings ...

Engine Mounting Support - front engine mounting support in the engine mounting assembly. Carries the front engine mounting between the engine and ...

Engine Mounting Support - front engine mounting support in the engine mounting assembly. Carries the front engine mounting between the engine and ...