Range Rover L322 Parts

Front Indicator Bulb - PY21W amber signal bulb, 12V 21W, with a BAU15s offset-pin bayonet base. It fits the front direction indicator lamp. The am...

Lower Timing Cover Gasket - sealing gasket for the joint between the lower timing cover and the cylinder block on the AJ-series 4.4L V8 and 4.2L su...

Gasket - Cylinder Head

Upper Radiator Hose in the engine cooling circuit, running from the engine coolant outlet to the radiator inlet. It carries hot coolant leaving th...

Rear Crankshaft Oil Seal and Retainer for the 3.6L V8 TDV8 (Lion) diesel engine. Fitted at the flywheel end of the crankshaft, this seal-and-retai...

Intake Manifold Gasket - LH seals the intake (inlet) manifold to the cylinder head on the left-hand bank of the 3.6L V8 TdV8 (Lion) turbo-diesel en...

Oil Filter Element - cartridge-type engine oil filter element for the oil cooler and filter assembly. The element installs into the filter housing...

Radiator Bleed Hose - small-bore hose in the cooling system of the 4.2 V8 Supercharged petrol engine. It vents air trapped at the top of the radia...

Idler Pulley - Drive Belt guides the accessory drive belt around its path at the front of the engine, mounted on the alternator bracket. The freel...

Radiator Bleed Hose - small-bore hose in the cooling system of the 4.2 V8 Supercharged petrol engine. It vents air trapped at the top of the radia...

Low Beam Headlamp Bulb - H7 halogen bulb, 12V 55W, PX26d base, for headlamp assemblies with halogen lighting. Single-filament H7 bulb serving the ...

Drive Belt Tensioner for the front-end accessory drive of the 4.4L V8 petrol and 4.2L V8 supercharged engines. The tensioner consists of a spring-...

Lower Timing Cover Gasket - sealing gasket for the joint between the lower timing cover and the cylinder block on the AJ-series 4.4L V8 and 4.2L su...

Coolant Temperature Sensor - engine coolant temperature sensor for the AJ-series 4.4L V8 and 4.2L supercharged V8 petrol engines. The sensor is a ...

Rear Crankshaft Seal and Retainer - the rear main oil seal supplied complete with its retainer housing, sealing the crankcase at the transmission e...

Hinge

Inlet Manifold Gasket sealing the inlet manifold to the cylinder head. Seals the charge-air path between the manifold and the head on the 2.0L Td4...

Timing Cover Gasket sealing the front timing cover to the cylinder block on the 4.4L AJ V8 petrol and 4.2L V8 supercharged engines. The gasket sea...

Timing Cover Gasket sealing the front timing cover to the cylinder block on the 4.4L AJ V8 petrol and 4.2L V8 supercharged engines. The gasket sea...

Cylinder Head Gasket for the 4.4L V8 diesel engine, right-hand cylinder head. It seals the joint between the cylinder head and the engine block, co...

Lambda Sensor (exhaust oxygen sensor) for the exhaust and engine management system of V6 and V8 petrol engines. The sensor threads into the front ...

Lambda Sensor (exhaust oxygen sensor) for the exhaust and engine management system of V6 and V8 petrol engines. The sensor threads into the front ...

Inlet Manifold Pressure Sensor for the diesel engine management air intake system, mounted directly on the inlet manifold. The sensor reports abso...

Coolant Expansion Tank for the engine cooling system on the 5.0L V8 naturally aspirated petrol engine. The tank holds the coolant reserve and abso...

Hood Release Cable for the bonnet release mechanism, right-hand drive configuration. The cable connects the interior release lever to the bonnet l...

Hood Release Cable for the bonnet release mechanism, right-hand drive configuration. The cable connects the interior release lever to the bonnet l...

Window Regulator for the rear left-hand door, part of the door glass and regulator assembly carried behind the door trim casing. The regulator car...

Bonnet Safety Catch for the bonnet (hood) latch system, the secondary catch that retains the bonnet after the primary latch is released. It holds ...

Service Kit - 5.0L V8 Petrol

Exterior mirror motor - left-hand side glass adjustment motor within the door mirror head. The motor sits behind the mirror glass and drives the g...

Piston Ring Set for the 4.4L M62 V8 petrol engine, standard size, grade 0. The rings seal the combustion chamber against the cylinder bore, transf...

Brake Disc for the rear axle, internally vented type. Part of the braking system, providing the friction surface the rear pads clamp against to sl...

Manifold Absolute Pressure (MAP) Sensor - measures the pressure inside the intake manifold and supplies an engine-load signal to the engine control...

Piston Assembly for the 3.0L M57 D30 6-cylinder diesel engine, standard size. The piston transfers combustion pressure to the connecting rod and, ...

Crankshaft Seal & Retainer – Rear is the rear main oil seal together with its carrier plate, mounted to the rear face of the cylinder block on ...

O-Ring Seal for the cylinder head cover on the AJ-V8 4.4L petrol and 4.2L supercharged petrol engines. The seal locates in the groove of the cylin...

Inlet Manifold Pressure Sensor for the diesel engine management air intake system, mounted directly on the inlet manifold. The sensor reports abso...

O-Ring Seal for the cylinder head cover on the AJ-V8 4.4L petrol and 4.2L supercharged petrol engines. The seal locates in the groove of the cylin...

Heated exhaust gas oxygen (HEGO) sensor, rear (post-catalyst) position, for the 4.4L V8 petrol engine (M62 B44). The sensor sits in the exhaust do...

Heated exhaust gas oxygen (HEGO) sensor, rear (post-catalyst) position, for the 4.4L V8 petrol engine (M62 B44). The sensor sits in the exhaust do...

Heated exhaust gas oxygen (HEGO) sensor, front (pre-catalyst) position, for the 4.4L V8 petrol engine (M62 B44). The sensor sits in the exhaust up...