Range Rover Sport L320 Parts

Crankcase Ventilation Valve (PCV valve) for the crankcase emission control system. It regulates the flow of blow-by gases from the crankcase into ...

Power Steering Reservoir Cap - the screw cap that closes the power steering fluid reservoir in the hydraulic steering circuit. It seals the reserv...

Nut for the diesel fuel injection pump and timing gear. Secures the drive gear to the high-pressure fuel injection pump on the 2.7L Lion V6 diesel...

Handbrake Shoe Kit supplying the friction shoes for one side of the rear-axle parking brake. The shoes expand against the parking brake drum integr...

Disc - Brake

EGR Tube connecting the exhaust manifold to the EGR valve on the 3.0L V6 turbo diesel engine. Carries hot exhaust gas from the exhaust manifold to...

Oil Cooler Seal seals within the oil cooler and filter assembly. It forms the oil-tight joint at the oil separator on the 3.6L V8 diesel engine, p...

Ignition Coil for the 5.0L V8 petrol engine (AJ133), part of the ignition coil and spark plug assembly. This is a coil-on-plug unit: it mounts dir...

Timing Cover Gasket sealing the front timing cover to the cylinder block on the 4.4L AJ V8 petrol and 4.2L V8 supercharged engines. The gasket sea...

Exhaust Gas Temperature Sensor for the diesel exhaust aftertreatment system, fitted to vehicles equipped with a diesel particulate filter (DPF). T...

Coolant Hose serving the auxiliary coolant pump in the engine cooling circuit of the supercharged AJ-V8 petrol engine. The auxiliary coolant pump ...

Lower Timing Cover Gasket - sealing gasket for the joint between the lower timing cover and the cylinder block on the AJ-series 4.4L V8 and 4.2L su...

Gasket - Cylinder Head

Hose - Heater Water

Intake Manifold Gasket - LH seals the intake (inlet) manifold to the cylinder head on the left-hand bank of the 3.6L V8 TdV8 (Lion) turbo-diesel en...

Radiator Hose

Suspension Arm Bush is the rear hydraulically damped bush (hydrabush) pressed into the front lower suspension arm. The fluid-filled hydrabush isol...

Number Plate Lamp - With Bulb is the rear licence plate illumination unit within the rear lighting circuit. It sits in the rear number plate surro...

Rear Crankshaft Seal and Retainer - the rear main oil seal supplied complete with its retainer housing, sealing the crankcase at the transmission e...

Hose

Front heater hose for the passenger compartment heater coolant circuit. Carries coolant between the engine cooling system and the heater matrix, f...

Cylinder Head Gasket for the 4.4L V8 diesel engine, right-hand cylinder head. It seals the joint between the cylinder head and the engine block, co...

Switch

Heater Hose in the cabin heating circuit, carrying engine coolant between the engine cooling system and the heater matrix. Hot coolant drawn from ...

Heater Blend Stepper Motor - Front is an electric actuator mounted on the heating and air-conditioning housing. It drives the air-blend flap that ...

Ride Height Sensor Attachment Kit for the front air suspension ride-height sensor (10MY-type). The ride height sensor reports suspension travel to...

Ride Height Sensor Attachment Kit for the front air suspension ride-height sensor. The ride height sensor reports suspension travel to the air sus...

Glove Box Door Damper. Controls the rate at which the glove box lid opens, providing a smooth, damped movement within the facia glove box assembly.

Hub to Knuckle Bolt, M12 x 70mm. Secures the front wheel hub assembly to the steering knuckle within the front suspension and hub assembly.

Manifold Absolute Pressure (MAP) Sensor - measures the pressure inside the intake manifold and supplies an engine-load signal to the engine control...

O-Ring Seal for the cylinder head cover on the AJ-V8 4.4L petrol and 4.2L supercharged petrol engines. The seal locates in the groove of the cylin...

Bolt - M10 x 25 mm, with washer. Underbody and chassis fixing used to secure engine splash shields, heat shields and underbody protection panels t...

Bracket - Fender Mounting

Rubber Mount - isolating insulator in the suspension system. Cushions and locates suspension components against the chassis, damping vibration and...

Bracket - Mtg

Injector Refit Kit - Cylinders No.3 and No.4 supplies the parts renewed when a fuel injector is removed and refitted, within the fuel injectors and...

Heater Blend Stepper Motor is an electric actuator mounted on the heating and air-conditioning housing. It drives an air-blend flap that regulates...

Coolant Overflow Tank for the engine cooling system, supplied with an integrated coolant level sensor. The tank is the pressurised expansion reser...

Fuel Filter Element for the 2.7L TDV6 diesel engine, fitted in the fuel supply circuit ahead of the high-pressure injection pump. The element remo...

Body Mount Bracket - chassis-frame bracket forming part of the body mounting arrangement between the body and the chassis frame. The bracket is fi...

Differential Insulator - rubber mounting bush used in the differential mounting arrangement, on both the front axle case and the rear axle. It iso...

Lockable Retainer Handle for the detachable tow bar system. It secures and locks the removable tow bar neck into the receiver, and is supplied wit...