for Discounts / VAT
for Discounts & Correct VAT
Parts for the Range Rover Sport L320, built from 2005 to 2013 on the Integrated Body Frame platform shared with the Land Rover Discovery 3. This collection covers all L320 variants: 2.7 TDV6, 3.6 TDV8, 4.4 V8, 4.2 and 5.0 Supercharged. Use the filters above to narrow by category or quality grade.
Screw, 6 x 26 mm. A threaded fastener used to secure components during assembly.
Front Brake Disc - vented - the rotating friction element of the front disc brake assembly, to the size specified for the 4.4 V8 EFI petrol install...
View full detailsFuel Cooler for the TDV6 / TDV8 diesel fuel system. Fitted in the fuel return line, it dissipates the heat that fuel absorbs while circulating thro...
View full detailsHeater Matrix is the cabin heat exchanger within the HVAC heater assembly, supplied for vehicles fitted with air conditioning. Engine coolant is c...
View full detailsEngine Mounting Support - front engine mounting support, part of the engine mounting assembly on the 5.0L V8 Petrol (AJ133). The support carries t...
View full detailsRadiator Bracket for the engine cooling system. The bracket locates and secures the radiator within the front-end cooling pack, holding it in posit...
View full detailsEngine Mounting Support - front engine mounting support, part of the engine mounting assembly on the 5.0L V8 Petrol (AJ133). The support carries t...
View full detailsTailgate Glass Latch secures the upper opening glass section of the tailgate. It engages the glass hatch against the tailgate frame to hold it clo...
View full detailsAir Inlet Duct for the air intake system of the 3.6L V8 diesel engine. It carries filtered air from the air cleaner outlet toward the turbocharger...
View full detailsLambda Sensor – Rear – LH for petrol V6 and V8 engines, fitted in the exhaust downstream of the catalytic converter on the left-hand bank. This po...
View full detailsSecondary Drive Belt Tensioner for the auxiliary belt drive of the 4.4L AJ-V8 petrol engine. These V8 engines use a two-belt accessory drive; this...
View full detailsSecondary Drive Belt Tensioner for the auxiliary belt drive of the 4.4L AJ-V8 petrol engine. These V8 engines use a two-belt accessory drive; this...
View full detailsExhaust Mounting is a moulded rubber hanger that suspends the exhaust system from the vehicle underbody, supporting the silencer and intermediate p...
View full detailsLambda Sensor – Rear – LH for petrol V6 and V8 engines, fitted in the exhaust downstream of the catalytic converter on the left-hand bank. This po...
View full detailsDrive Belt for the secondary auxiliary belt circuit of the 3.6L TDV8 diesel engine. Driven from the crankshaft pulley, this belt turns the active r...
View full detailsDrive Belt for the secondary auxiliary belt circuit of the 3.6L TDV8 diesel engine. Driven from the crankshaft pulley, this belt turns the active r...
View full detailsThermostat for the engine cooling circuit, regulating coolant flow to maintain the correct operating temperature. It remains closed during warm-up...
View full detailsRadiator Mounting Insulator - Top for the engine cooling system. The rubber insulator seats the upper edge of the radiator in its mounting, locatin...
View full detailsIntercooler Seal for the charge-air (intercooler) circuit of the 2.7L V6 TDi diesel engine. The seal closes the gap between the intercooler and its...
View full detailsInlet Manifold Stud secures the inlet manifold to the cylinder head. It provides a fixed threaded post that the manifold seats over and is clamped ...
View full detailsDoor Handle Cap is the exterior end cap fitted to the right-hand-side door handle, finishing the handle end on a door without a lock barrel. It is...
View full detailsFuel Filler Flap Actuator - the electric actuator that locks and releases the external fuel filler flap. Operated through the central locking circ...
View full detailsBonnet Safety Latch Guide within the bonnet latch assembly. This guide locates and supports the secondary safety latch, the catch that retains the...
View full detailsSuspension Arm Bolt Kit for the rear upper suspension arm. This fitting kit supplies the mounting fasteners that secure the rear upper suspension ...
View full detailsOil Cooler Gasket for the AJ-Series V8 petrol engine, sealing the oil cooler and filter housing to the cylinder block. This gasket forms the oil-t...
View full detailsAccessory Drive Belt for the front-end accessory drive of the 5.0L AJ133 V8 petrol engine. The belt is turned by the crankshaft pulley and transmit...
View full detailsAccessory Drive Belt for the front-end accessory drive of the 5.0L AJ133 V8 petrol engine. The belt is turned by the crankshaft pulley and transmit...
View full detailsAccessory Drive Belt for the front-end accessory drive of the 5.0L AJ133 V8 petrol engine. The belt is turned by the crankshaft pulley and transmit...
View full detailsBrake Disc - front vented brake disc forming part of the front braking assembly. The disc provides the friction surface against which the front br...
View full detailsFront Brake Disc - Cross-Drilled & Grooved - a vented front-axle brake rotor forming part of the front disc-brake assembly. The disc is bolted...
View full detailsFront Brake Disc - a vented front-axle brake rotor forming part of the front disc-brake assembly. The disc is bolted to and rotates with the front...
View full detailsFront Brake Disc - a vented front-axle brake rotor forming part of the front disc-brake assembly. The disc is bolted to and rotates with the front...
View full detailsFront Brake Disc - Coated - a vented front-axle brake rotor forming part of the front disc-brake assembly. The disc is bolted to and rotates with ...
View full detailsFront Brake Disc - a vented front-axle brake rotor forming part of the front disc-brake assembly. The disc is bolted to and rotates with the front...
View full detailsBrake Disc - rear vented brake disc forming part of the rear braking assembly. The disc provides the friction surface against which the rear brake...
View full detailsBrake Disc - front vented brake disc forming part of the front braking assembly. The disc provides the friction surface against which the front br...
View full detailsBrake Disc - rear vented brake disc forming part of the rear braking assembly. The disc provides the friction surface against which the rear brake...
View full detailsBrake Disc - rear vented brake disc forming part of the rear braking assembly. The disc provides the friction surface against which the rear brake...
View full detailsBrake Disc - rear vented, coated brake disc forming part of the rear braking assembly. The disc provides the friction surface against which the re...
View full detailsBrake Disc - front vented brake disc forming part of the front braking assembly. The disc provides the friction surface against which the front br...
View full detailsBrake Disc - front vented brake disc forming part of the front braking assembly. The disc provides the friction surface against which the front br...
View full detailsBrake Disc - front vented, coated brake disc forming part of the front braking assembly. The disc provides the friction surface against which the ...
View full detailsBrake Disc - front vented brake disc forming part of the front braking assembly. The disc provides the friction surface against which the front br...
View full detailsCirclip for the locking differential cross-shaft (barshaft) within the rear axle differential assembly. The circlip seats in a groove on the cross...
View full detailsSteering Rack Boot protects the inner tie-rod joint and rack end of the power steering gear. The convoluted rubber boot (gaiter) excludes dirt and ...
View full detailsHub Bearing Clip for the rear knuckle, part of the rear wheel bearing assembly. The clip locates in the rear knuckle (hub carrier) bore and retain...
View full detailsHub Bearing Clip for the rear knuckle, part of the rear wheel bearing assembly. The clip locates in the rear knuckle (hub carrier) bore and retain...
View full detailsRear Axle Boot Kit
The Range Rover Sport L320 was produced from 2005 to 2013. It is the first generation of the Range Rover Sport line and carries the chassis designation L320. The vehicle is built on the Integrated Body Frame (IBF) platform, a separate-chassis architecture shared with the Land Rover Discovery 3 (L319). This platform is distinct from the monocoque L322 Range Rover. The IBF construction means suspension mounts, body mounts, drivetrain tunnels, and underbody components are architecturally related to the Discovery 3, not the full-size Range Rover.
Production ran across two distinct build periods. The pre-facelift range (2005 to 2009) used the 2.7 TDV6 (engine code 276DT) and the 4.2 litre Supercharged V8 (AJ33S) as its primary variants. The facelift range (2010 to 2013) introduced the 3.0 TDV6 (engine code 306DT) as the primary diesel replacement, along with the 5.0 V8 and 5.0 Supercharged (AJ133). The 3.6 TDV8 (engine code 368DT) and 4.4 V8 (AJ41) were offered across both periods.
This distinction matters when ordering parts. Service kits, oil filters, timing components, and engine-specific hardware are not interchangeable between the 276DT and 306DT. If you are unsure which engine your vehicle has, confirm using the engine code stamped on the block or by decoding your VIN before ordering.
FitmentThe two main build periods share a chassis code but differ in engine, gearbox calibration, suspension electronics, and several bodywork components. When ordering parts, confirm which build period applies to your vehicle.
The simplest method is to check your VIN. The 10th character of your 17-digit VIN encodes the model year. This Land Rover VIN identification guide explains how to decode this character for your exact build year.
For engine parts specifically, the engine code is stamped on the block and is also recorded on the V5C or registration document. Matching the engine code to the correct parts listing is the most reliable way to confirm fitment before purchase.
If you need help identifying the correct part for your chassis and engine combination, contact the Budget Parts team directly.
This collection includes Genuine, OEM, and aftermarket parts for all L320 variants. Parts categories covered include engine components, air suspension, braking systems, drivetrain, transmission, electrical, cooling, steering, and service consumables.
Genuine parts are supplied through the official Land Rover distribution chain and carry original Land Rover part numbers. OEM parts are manufactured by the same suppliers that produce components for Land Rover directly, and are sold outside the official channel. Aftermarket parts are independently manufactured alternatives. Each product listing in this collection states its quality grade. For guidance on which grade suits your application, the quality-grade explanation on the Range Rover parts hub applies equally here.
Parts CategoriesThe categories below represent the highest-demand repair and service areas for the Range Rover Sport L320 in the EU market. Each links to the relevant component collection. Use the filters on the destination page to narrow to L320 fitment.
Engine parts for the L320 cover rebuild kits and components for the 2.7 TDV6, 3.0 TDV6, and 3.6 TDV8 diesels, including crankshaft and main bearing kits for the 276DT, cylinder head bolts, EGR components, and oil separator kits. Engine parts are also available for the 4.2 SC, 4.4 V8, and 5.0 SC petrol variants.
Air suspension parts include compressors (covering both AMK and Hitachi fitments across pre-facelift and facelift builds), air springs, struts, valve blocks, height sensors, and relay components. The L320 uses a four-corner electronically controlled EAS system across all variants.
Braking parts include discs, pads, EPB (Electronic Parking Brake) kits, calipers, and brake lines. The EPB system fitted to the L320 uses cable-operated rear shoes driven by a chassis-mounted actuator, a layout shared with the Discovery 3 and Discovery 4.
Drivetrain parts include propshafts, driveshafts, transfer case components, differential parts, and driveline seals.
Service and consumable parts include oil filters, air filters, fuel filters, spark plugs (petrol variants), glow plugs (diesel variants), coolant hoses, and drain plugs.
Rebuild kits and service components for 276DT, 306DT, 368DT, AJ41, AJ33S, and AJ133 engines. Filter to your engine variant on the destination page.
L320 engine parts →EAS compressors, air springs, valve blocks, height sensors, and shock absorbers. Filter to L320 fitment on the destination page.
L320 suspension parts →Discs, pads, calipers, and EPB components for pre-facelift and facelift builds. Filter to L320 fitment on the destination page.
L320 brake parts →Propshafts, driveshafts, universal joints, and driveline rebuild components for all L320 variants.
L320 driveshaft and propshaft parts →Budget Parts supplies independent Land Rover workshops and trade buyers across the EU. A wholesale portal is available for registered trade accounts, providing trade pricing and account-based ordering. If you operate a workshop or purchase parts in volume, visit the wholesale portal to register or log in.
Technical GuidesThe articles below are published technical guides relevant to Range Rover Sport L320 owners and independent workshops. They provide diagnostic context and maintenance reference for the part categories covered in this collection.
A model-wide fault reference covering the L320 production run from 2005 to 2013. Covers the 2.7 TDV6 crankshaft and timing system, air suspension failure patterns, EPB faults, and electrical issues. Relevant before ordering engine rebuild, suspension, or braking parts for a vehicle with a known fault.
L320 common problems guide →A component-level breakdown of the L320 EAS system. Explains which parts fail first (compressor, air springs, valve block, height sensors), what symptoms each failure produces, and what to replace. Relevant before ordering air suspension components for an L320 showing height or compressor warnings.
L320 air suspension fault guide →A service guide for the 276DT timing system used in the pre-facelift L320 (2005 to 2009). Covers service intervals, the front belt and rear toothed belt configuration, and parts required. Relevant for any 2.7 TDV6 L320 approaching a timing service or showing symptoms of timing system wear.
2.7 TDV6 timing belt guide →The full Range Rover model family, including all Sport generations and full-size Range Rover variants.
Range Rover parts →Parts for the second-generation Range Rover Sport (2014 to 2022), the successor to the L320.
Range Rover Sport L494 parts →The L319 Discovery 3 shares the IBF platform with the L320 and several drivetrain, suspension, and underbody components cross-fit.
Discovery 3 parts →Yes. This collection includes parts for all L320 variants built from 2005 to 2013. That covers the pre-facelift build (2005 to 2009) with the 2.7 TDV6, 4.2 SC, and 4.4 V8 engines, and the facelift build (2010 to 2013) which introduced the 3.0 TDV6 and 5.0 V8 variants. Some parts are interchangeable across the full production run. Others, particularly engine-specific components and certain suspension electronics, are build-period specific. Always confirm your engine code and model year before ordering.
Your 17-digit VIN is the most reliable method. The 10th character encodes the model year. The VIN is located on the door jamb plate, the windscreen base, and your vehicle registration document. Land Rover's official VIN identification guide explains how to read the model year digit. For engine identification, the engine code is stamped on the block and is also noted on your V5C or equivalent EU registration document. If you need help confirming fitment, contact Budget Parts directly before ordering.
No. The 2.7 TDV6 (engine code 276DT) and the 3.0 TDV6 (engine code 306DT) are different engines with different blocks, different timing systems, different oil capacities, and different service part specifications. The 276DT uses a front timing belt with a separate rear toothed belt. The 306DT uses a mixed chain and belt timing system. Oil filters, service kits, and timing components are engine-specific. Always confirm your engine code before ordering these parts.
The L320 uses the Integrated Body Frame (IBF) platform, a separate-chassis architecture shared with the Land Rover Discovery 3 (L319). This is a different construction from the monocoque L322 Range Rover. The IBF platform means the L320 shares drivetrain, suspension mount geometry, and certain underbody components with the Discovery 3. This is relevant when ordering suspension, driveline, and chassis-related parts, some of which have cross-fitment with the Discovery 3.
Genuine parts carry the original Land Rover part number and are supplied through the official JLR distribution chain. OEM parts are made by the same manufacturers that supply Land Rover directly, sold outside the official channel. The component specification is often identical to Genuine. Aftermarket parts are independently manufactured alternatives. Each listing in this collection states its quality grade. For non-critical service parts and bodywork consumables, aftermarket is often appropriate. For engine internals, timing components, and safety-critical braking parts, Genuine or OEM is the recommended choice.
Yes. Orders are fulfilled from the Netherlands and ship across the EU. Customers in Germany, Belgium, France, Sweden, and other EU member states order regularly. Shipping timelines and delivery options are shown at checkout. For large or trade orders, the Budget Parts wholesale portal provides account-based ordering and trade pricing.