Products

Upper Radiator Mounting Bracket that locates and secures the top of the radiator in the cooling system. Fitted to four-cylinder TDi and Td5 applic...

Bracket

Intercooler Hose for the 200 TDi turbocharged induction system. Part of the charge-air ducting that links the intercooler into the boost circuit, ...

Intercooler Hose for the 200TDi 2.5L turbocharged diesel engine intercooler circuit on the Defender. This hose forms part of the charge air routin...

Catalytic Converter for the V8 petrol exhaust system. It treats exhaust gases to reduce emissions, fitted in the exhaust line on applications equi...

Dump Valve and Bracket for the 2.5L 300 TDi and Td5 diesel engines, fitted in the engine air intake system. The assembly comprises the dump valve ...

Exhaust Rubber Mounting suspends the exhaust system from the chassis, supporting the silencer and pipework at its mounting points. The rubber elem...

Exhaust Gasket for the front exhaust section on 2.5L TDi and V8 petrol engines. On 2.5L 200 TDi and 300 TDi 4-Cylinder engines this gasket seals t...

Exhaust mount washer

Fuel Tank Spill Return Pipe Gasket for the fuel tank assembly. This gasket seals the joint where the spill return pipe meets the fuel tank, preven...

Fuel Tank Pump Sealing Ring for the fuel tank pickup and pump assembly. Seals the pump/pickup unit where it mounts to the top of the fuel tank, pr...

Exhaust Bracket for the rear of the exhaust system, securing the rear pipe section to the chassis. It forms the mounting point that carries the re...

Rear Exhaust Bracket - the mounting bracket that supports the rear section of the exhaust system, locating it to the chassis and carrying the tailp...

Rear Exhaust Silencer - the rearmost silencer box in the exhaust system of the 300 TDi 2.5L 4-cylinder turbo diesel. It attenuates exhaust noise b...

Copper Sealing Washer - a crush washer used to seal banjo and union connections throughout the diesel fuel system, at fuel pipes, filters and sedim...

Centre Exhaust Silencer Pipe - the intermediate section of the exhaust system on the 200 TDi 2.5L 4-cylinder turbo diesel, running between the fron...

Exhaust Tailpipe - the terminal section of the exhaust system on the 200 TDi 2.5L 4-cylinder turbo diesel, fitted downstream of the rear silencer. ...

Hose Clip is a worm-drive (Jubilee-type) clamp with a 20-30 mm clamping range. Tightened by a captive worm screw, it secures a flexible hose onto ...

Radiator Assembly is the primary heat exchanger of the engine cooling system. Mounted at the front of the vehicle, it dissipates heat from the eng...

Joint washer exhaust TD5

Fuel Tank Locking Ring for the fuel pump and sender unit assembly. This ring secures the fuel pump and sender unit in the top of the fuel tank, pr...

Fuel Pump is the in-tank electric fuel pump in the fuel delivery system, mounted within the fuel tank. It draws fuel from the tank and delivers it...

Inline Fuel Filter for petrol fuel-injection (EFI) systems, fitted in the pressurised fuel supply line between the fuel pump and the injector rail....

Fuel Tank - Secondary - 15 Gallon is the auxiliary side-mounted fuel tank for the Defender 110 Hard Top and Pick-Up. This secondary tank supplemen...

Fuel Tank Breather Hose for the fuel filler and tank ventilation circuit. Connects the fuel tank to the filler neck, venting the tank so that air ...

Exhaust Centre Silencer for the 300 TDi exhaust system. The intermediate silencer box fitted in the centre section of the exhaust, between the fro...

Exhaust Tail Pipe for the 300 TDi exhaust system. The rearmost section of the exhaust line, fitted downstream of the rear silencer to carry gas to...

Intercooler Hose for the Td5 2.5L 5-cylinder turbo diesel, part of the charge-air system between the intercooler and the engine. It carries cooled...

Diesel Fuel Filter - Inline for the 2.5L TDi and Td5 2.5L 5-Cylinder diesel fuel system. Fitted at the sedimentor position in the fuel supply line...

Fuel Pipe Double Clip for routing the fuel lines in the fuel delivery system. Retains a pair of fuel pipes along their run, holding them against t...

Bottom Radiator Hose for the 200TDi turbo diesel engine, forming the lower connection of the engine cooling circuit. It returns cooled coolant fro...

Front Silencer for the Defender 110 200Tdi exhaust system, covering vehicles produced from 1990 to 1994. This silencer fits in the front section o...

Radiator for the 200 TDi / 300 TDi diesel engine cooling system. The main heat exchanger that transfers heat from the coolant to the passing airfl...

Radiator for the engine cooling system, supplied with an integral oil cooler section. Coolant leaving the engine enters the top tank, passes down ...

Radiator assembly

Inlet Valve for the cylinder head valve train, with a 34.5 mm head diameter. The inlet valve opens on the induction stroke to admit the air/fuel c...

Valve Cotter in the cylinder head valvetrain, locking the valve spring retainer to the valve stem. The cotters seat as a pair into the machined gr...

Crankshaft Torsional Vibration Damper for 2.5L 4-cylinder naturally aspirated and turbo diesel engines (non-TDi). Mounted on the crankshaft nose, ...

Oil seal

Oil Filter Adaptor for the engine lubrication circuit, mounting the oil filter to the cylinder block. The adaptor forms the interface between the ...

Injector Pipe - No.1 for 2.5L naturally aspirated diesel and 2.5L turbo diesel engines. This high-pressure steel fuel pipe routes fuel from the me...

Injector Pipe - No.2 for 2.5L naturally aspirated diesel and 2.5L turbo diesel engines. This high-pressure steel fuel pipe routes fuel from the me...

Injector Pipe - No.3 for 2.5L naturally aspirated diesel and 2.5L turbo diesel engines. This high-pressure steel fuel pipe routes fuel from the me...

Injector Pipe - No.4 is a high-pressure fuel line in the injection system of the 2.5L 4-cylinder diesel engine. It forms part of the set of rigid ...

Banjo Bolt - M10 is the hollow fastener used to secure the oil feed pipe at the block-to-head junction in the lubrication circuit of the 2.25L and ...

Timing Chain for the 2.25L four-cylinder engine, part of the timing drive assembly. Drives the camshaft from the crankshaft sprocket, holding valv...

Exhaust Gasket - V8 for the exhaust downpipe assembly on V8 petrol engines. This gasket seals the flange joint at the exhaust downpipe, maintainin...

Joint Washer sealing the mounting joint between the cylinder block and the auxiliary unit driven off the engine: the vacuum pump on diesel engines,...