Products

Crankcase Ventilation Valve located in the engine air cleaner assembly. It controls the flow of crankcase blow-by gases from the breather system i...

Drive Flange is a torque-transmitting flange fitted to the manual gearbox output. It provides the bolted coupling that carries drive from the gear...

Aerial with cable Defender

oil filter OEM Hengst Fits: - Defender Puma 2.2L - Defender Puma 2.4L - Discovery Sport 2.2L D 16V - Freelander2 2.2L D 16V - Range Rover Evoque 2...

Rear End Door Latch Assembly is the latch mechanism for the rear end door (tailgate). It engages the striker on the body aperture to hold the rear...

Rear End Door Lock and Latch Assembly with integrated remote control unit. Mounted within the rear end door, the latch mechanism engages the strik...

Drive Belt Idler and Bearing Kit serves the accessory drive belt system, supplying the idler pulley and its bearing that guide the belt and maintai...

Rear Support Bracket - an upper angle bracket providing a mounting point within the rear body structure. Supplied individually.

Turbocharger Oil Feed Pipe - carries pressurised engine oil from the cylinder block to the turbocharger bearing housing, lubricating and cooling th...

Differential Carrier for the front or rear axle, transmitting drive from the propshaft to the axle halfshafts. The carrier holds the crown wheel a...

Rear Door Lock Seal - a gasket for the lock cover plate on the rear end door. It sits between the lock cover plate and the door skin, sealing the ...

Engine Front Cover - the timing case cover at the front of the Puma 2.4L Duratorq TDCi (and 2.2L TDCi) engine. It encloses the front of the cylind...

Brake Pads – Rear is the friction pad set for the rear disc brakes. The pads are clamped against the rear brake discs by the caliper pistons to ge...

Support Bracket - RH is the right-hand bracket in the bulkhead-to-chassis mounting group. It bolts between the lower bulkhead footwell and the cha...

Support Bracket - LH is the left-hand bracket in the bulkhead-to-chassis mounting group. It bolts between the lower bulkhead footwell and the chas...

Rear Wiper Arm - the pivoting arm of the rear wash/wipe system, mounted on the tailgate wiper motor spindle. It transfers the oscillating drive fr...

Front Anti-Roll Bar in the front suspension assembly. It links the left- and right-hand suspension sides to resist body roll during cornering, imp...

Anti-Roll Bar is the rear stabiliser bar within the suspension system, mounted transversely across the rear axle. Connected to the suspension thro...

Door Glass is the front door glass for the right-hand (RH) side, in clear glass. It is the door window pane, mounting within the front door.

Front Door Glass is the fixed clear glazing panel for the left-hand front door, forming part of the door assembly. This is the left-hand (LH) side...

Drive Belt Tensioner maintains correct tension on the auxiliary drive belt of the 2.4 and 2.2 TDCi engines. The spring-loaded tensioner pulley bea...

Rear Door Card is the interior trim panel that finishes the inside face of the rear tail door, concealing the door structure behind a moulded casin...

Tailgate Trim Panel is the interior casing that finishes the inside face of the rear tail door, concealing the door structure behind a moulded pane...

Cooler EGR Gasket

Coolant Hose connecting the coolant expansion tank to the radiator within the engine cooling circuit. This moulded hose carries coolant between th...

Radiator Grille Panel - front grille panel forming the cooling-air intake aperture of the front-end body assembly. It mounts ahead of the radiator...

Manual Transmission is the complete MT82 six-speed manual gearbox assembly. The MT82 transmits drive from the clutch to the transfer box, providin...

Ignition switch

Corner capping RH 90/110 black MA

Corner capping LH 90/110 black MA

Cylinder Head Gasket for the 2.2L TD4 turbo-diesel engine. Seals the joint between the cylinder head and the engine block, containing combustion p...

Head Gasket seals the joint between the cylinder head and the engine block. It seals combustion pressure, coolant and oil passages across the head...

Cylinder Head Gasket seals the joint between the cylinder head and the engine block. It seals combustion pressure, coolant and oil passages across...

Rear Upper Shock Absorber Bracket, the upper mounting bracket for the rear damper within the rear suspension. It forms the fixed upper anchorage b...

Heater Hose - a coolant hose in the heating and ventilation (HVAC) circuit, running between the heater matrix and the engine water pump. It return...

Tailgate Glass is the glazed panel of the rear side-hinged tailgate assembly. This is the heated variant, incorporating an electric demist element...

Rear Door Glass - the glass assembly for the rear end (tail) door. It incorporates a heated element for demisting the rear window and an integrate...

Windscreen Glass is the clear laminated glass for the forward body glazing system, installed within the windscreen aperture and bonded to the body ...

Rear Propshaft transmits drive from the transfer box rear output flange to the rear axle differential input, forming part of the driveline on the 9...

Tailgate Seal for the rear tailgate aperture, part of the body sealing system. It seals the gap between the tailgate and the body opening to keep o...

Tailgate Aperture Seal for the rear body aperture sealing assembly. Fitted around the perimeter of the tailgate body opening, this seal forms the ...

Sliding Window Assembly - rear side, right-hand. The glazed rear side window unit for the right-hand side, comprising the glass panes within their ...

Rear Shock Absorber - hydraulic damper for the rear suspension of the short-wheelbase (90-inch) chassis. It controls the oscillation of the rear co...

Shock Absorber – Rear is the rear suspension damper, part of the Shock Absorbers & Springs assembly. It mounts between the rear axle and the c...

Front Propshaft transmits drive from the transfer box front output to the front axle differential in the four-wheel-drive system. It runs between ...

Windscreen Strap - a three-hole clamping strap that secures the windscreen frame to the body. It retains the base of the windscreen frame against ...