Products

Mirror Arm within the external rear-view mirror assembly. This arm mounts at the door hinge position and extends outward to position the mirror he...

Spare Wheel Bonnet Buffer is a rubber buffer for the bonnet-mounted spare wheel carrier. It sits between the spare wheel and the bonnet, cushionin...

Door Checker Bracket Assembly - Rear - LH is the door check mechanism for the left-hand rear door. It links the door to the body pillar and limits...

Door Seal - Bottom for the left-hand front door, forming part of the door-aperture weather sealing. The seal fits along the lower edge of the door...

Nut Plate for the tailgate hinge mounting assembly. This weld nut plate provides captive threaded retention points for the tailgate closing bracke...

Stud Plate for the front sill channel section. Fitted within the front sill channel, this bolt plate provides captive attachment points for sill o...

Mud Shield – RHD – LH is the left-hand mud shield for the pedal box. It fits over the pedal box aperture in the bulkhead to keep mud, water and ro...

Quarter Panel Valance - LH for the Defender 110 Station Wagon. This pressed steel valance panel forms the lower rear section of the left-hand rear...

Bonnet Catch Plate is the mounting plate for the bonnet slam catch, located in the grille and front panel structure as part of the bonnet release a...

Seat Base - Outer is the lower seat cushion for either outer (driver or passenger) position in the front seating assembly. Foam-padded and finishe...

Seat Back for the outer front seat, in the deluxe pattern and finished in black. This is the upholstered backrest (squab) the occupant leans agains...

Seat Back and Headrest for the outer front seat, in the deluxe pattern and finished in black. This is the upholstered backrest (squab) the occupant...

Seat Base Cushion for the inner (centre) position of the 3-person front bench seat assembly. Constructed with a foam core upholstered in black vin...

Heater Duct Grommet for the heater and windscreen demister ductwork. This rubber grommet seals the opening where the heater outlet and demister duc...

Door Striker – RH is the right-hand striker plate for the rear-end door latch. The door latch engages this striker to draw the door closed and hol...

Door Lock Striker - LH is the striker that the left-hand door latch engages to hold the door closed. Mounted on the body pillar, it provides the f...

Heater Air Intake Spacer Tube fitted within the cabin heating system on the Land Rover Defender 90 and 110. This flanged tube locates within the h...

Rear Body Lower Mounting Nut Plate used in the rear body mounting assembly on the Land Rover Defender. This pressed steel plate sits behind the bo...

Wheelarch Eyebrow is the front wheelarch eyebrow moulding, part of the front wheelarch trim assembly. It mounts to the upper section of the front ...

Moulding - Wheelarch - Front Tri

Front Wheelarch Eyebrow in gloss black plastic for the left-hand side. This trim moulding follows the upper curve of the front wheelarch, finishing...

Wheelarch Eyebrow is the front wheelarch eyebrow moulding, part of the front wheelarch trim assembly. It mounts to the upper section of the front ...

Wheelarch Eyebrow is the front wheelarch eyebrow moulding, part of the front wheelarch trim assembly. It mounts to the upper section of the front ...

Moulding - Wheelarch

Wheelarch Eyebrow is the front wheelarch eyebrow moulding, part of the front wheelarch trim assembly. It mounts to the upper section of the front ...

Sill Panel to Body Bracket - a mounting bracket that ties the sill (rocker) panel to the body structure. It provides a fixing point between the ou...

Bonnet Lock Striker for the hand-operated bonnet latch assembly. This striker pin is the fixed catch component in the bonnet locking system, engag...

Fuel Connector Block Gasket for the Td5 2.5L five-cylinder diesel engine, sealing the fuel connector block to the engine within the fuel pressure r...

Fuel Connector Block Gasket for the Td5 2.5L five-cylinder turbo diesel engine, sealing the fuel connector block to the engine within the fuel pres...

Tailgate Chain supports the drop-down rear tailgate when it is lowered. It links the tailgate to the rear body, limiting the tailgate's downward t...

Switch Panel provides the mounting location for auxiliary switchgear in the dashboard and parcel-tray area of the fascia. Manufactured from alumin...

Heater grip OEM

Instrument Cowl is the binnacle that surrounds and shrouds the instrument cluster in the upper dashboard. Part of the fascia and instrument pack a...

Mudflap Bracket retains the front right-hand mudflap, securing it to the body so the flap hangs correctly behind the front wheel. This is the righ...

Mudflap Bracket retains the front right-hand mudflap, securing it to the body so the flap hangs correctly behind the front wheel. Manufactured in ...

Front Mudflap Bracket for the left-hand front mudflap. The bracket mounts behind the front wheel and holds the mudflap in position, locating it to...

Front Mudflap Bracket - Stainless Steel for the left-hand front mudflap. The bracket mounts behind the front wheel and holds the mudflap in positi...

Seat Back - Inner - the centre backrest of the three-piece front bench seat, trimmed in black vinyl. Fitted between the two outer seat backs, it p...

Rear End Door Glass in clear, untinted glazing, from the rear end door (safari door) assembly. The glass fills the window aperture in the rear end...

Rear Quarter Window Glass in clear (untinted) glass for the rear body side. It fits the quarter window aperture in the rear body, located alongsid...

Body Mounting Bracket, right hand, front position, from the rear body mounting arrangement. The bracket forms the interface between the rear body ...

Body Mounting Bracket, left hand, front position, from the rear body mounting arrangement. The bracket forms the interface between the rear body t...

Tailgate Hinge for the drop-side tailgate fitted to the High Capacity Pick Up (HCPU) body variant. This hinge forms the pivoting connection betwee...

Steering Column Shroud (Lower) is the lower half of the two-part trim cover that encloses the steering column beneath the dashboard. It mates with...

Lock Striker Plate is the body-mounted plate the door latch engages to hold the door closed. Fixed to the door aperture face, it provides the stri...

Door Seal Retainer - Rear End for the rear door seal assembly. This retainer locates and secures the door weatherstrip in its channel along the re...

Soft Top Hood Retainer Spindle for the soft top retaining hardware. The spindle forms part of the hood retainer mechanism, providing the pivot or ...

Windscreen Seal (Roof, Inner) is the rubber weatherstrip that seals the joint between the top of the windscreen frame and the leading edge of the r...