Products

Brake master cylinder

Exhaust silencer

Exhaust Downpipe for the 2.25L 4-cylinder petrol engine. The downpipe is the first section of the exhaust system. It bolts to the exhaust manifold...

Exhaust Downpipe for the Land Rover Defender fitted with the 4-cylinder 2.5-litre naturally-aspirated diesel engine. This primary exhaust pipe con...

Upgrade the protection of your Defender 90/110 with this galvanised front bumper designed for models from 1987 to 2006. Built from high-quality gal...

Pedal Pad is the moulded rubber cover that fits over a foot pedal within the pedal box assembly, providing a non-slip contact surface for the drive...

Fuel tank 90 upto (V)AA243342

Fitment Classic Defender: All diesel models up to (VIN) FA375497 (including Turbo Diesel, NOT for TDI) All petrol models except V8 up to (VIN) FA...

Axle Breather Pipe Clip from the axle breather system, retaining the breather hose along its run from the axle case up to its higher mounting point...

Front Road Coil Spring for the front suspension, right-hand side. This coil spring supports the front of the vehicle at its road ride height, worki...

Coil Spring for the front suspension, left-hand (passenger) side road spring position. This road coil spring seats between the chassis spring seat...

Coil Spring for the right-hand side of the coil-sprung suspension, identified by its red/blue paint marking which denotes the spring's load rating....

Coil Spring for the left-hand (passenger) side road spring position. This road coil spring seats between the chassis spring seat and the axle, sup...

Rear brake hose 90

Brake Hose for the rear of the braking hydraulic circuit, in non-ABS applications. This flexible hose carries hydraulic pressure from the rigid br...

Brake Hose is a flexible hydraulic line in the braking circuit, carrying fluid from the rigid chassis-mounted brake pipe to the caliper or wheel cy...

Fuel Tank Mounting Bracket for the rear of the fuel tank assembly. This bracket locates and secures the rear of the fuel tank to the chassis, carr...

Fuel Tank with integral skid guard for the fuel storage system. The pressed-steel tank incorporates a welded underside skid guard that shields it ...

Brake Master Cylinder is the primary hydraulic actuator of the braking circuit, converting pedal effort transmitted through the brake servo into th...

Brake Pipe for the right-hand side of the braking hydraulic circuit, in non-ABS, right-hand-drive applications. This rigid steel pipe carries hydr...

Clutch Pipe for the lower section of the clutch hydraulic circuit, on 4-cylinder and 300 TDi engines with manual transmission. This rigid pipe car...

Clutch Pipe for the lower section of the clutch hydraulic circuit, on 4-cylinder and 300 TDi engines with manual transmission. This rigid pipe car...

Chassis Frame Support Bracket for the right-hand side. It forms part of the vehicle's ladder-chassis structure, providing a fixed mounting and supp...

Chassis Frame Support Bracket for the left-hand side. It forms part of the vehicle's ladder-chassis structure, providing a fixed mounting and suppo...

Lower Spring Seat locates the base of the coil spring in the suspension. It provides the lower bearing surface on which the road spring rests, pos...

Spring Seat for the front coil spring suspension. It forms the lower seat that locates and supports the base of the front coil spring on the axle, ...

Fuel Sedimentor is a water and sediment trap in the diesel fuel supply line, installed upstream of the fuel filter and injection pump. Fuel passes...

Coolant Expansion Hose for the Land Rover Defender, for vehicles not fitted with an engine oil cooler. This hose connects the coolant expansion ta...

Fuel Pipe Union Nut for the fuel delivery line. This female threaded nut draws a fuel pipe up to its mating union, clamping the pipe's flared or c...

Compression Olive for rigid fuel pipe unions. This 8 mm ferrule seats between the union nut and the fitting body, compressing onto the pipe as the ...

Fuel Filter Housing Assembly for the fuel delivery line on carburettor petrol engines, including the 3.5L V8. This assembly mounts in-line between...

Nut - M8 plain low-profile nut, sold individually. A standard metric M8 nut in the low-profile (thin) form. Used across gearbox, suspension, axle,...

Locknut is a self-locking M10 nut used as a general threaded fastener across the vehicle. Its locking feature resists loosening under vibration, m...

Transfer Box Lever Lock Nut used to secure the selector linkage at the transfer case. This half nut (thin profile locking nut) threads onto the sel...

Thin Nut - a reduced-height hex nut with a 5/16" UNF (Unified Fine) thread. The shallow profile suits fastening points with limited clearance and ...

Hexagonal Thin Nut, 7/16" UNF, used within the clutch hydraulic circuit at the master cylinder and pipe connections. The reduced-height (thin) pro...

Hex Nut with a 7/8" UNF (Unified National Fine) thread, used on the power steering box assembly. This large six-sided fastener threads onto a matc...

Exhaust Olive for the exhaust system. This tapered sealing ring fits into the slip joint between two exhaust pipe sections. As the joint clamp is ...

Front down pipe LH V8 from vin 267908 to FA 404321

Rear Exhaust Tail Pipe for the Land Rover Defender 90. This is the rearmost section of the exhaust system, connecting to the rear silencer outlet ...

Rear Exhaust Silencer for the Land Rover Defender 90 fitted with the V8 petrol engine. This silencer box forms part of the rear exhaust assembly, ...

Air cleaner to carburettor hose

Centre Exhaust Silencer sits in the middle section of the exhaust system, reducing noise as gases pass from the front pipe rearward toward the tail...

Exhaust Silencer for the 2.5TD turbo diesel engine, fitted in the centre section of the exhaust run on the 110" and 130" wheelbase Defender. For t...

Suspension Bush for the rear lower link (bottom link) of the coil-sprung rear suspension. It presses into the link eye, cushioning the pivot mounti...

Suspension Bush for the rear lower link (bottom link) of the coil-sprung rear suspension. It presses into the link eye, cushioning the pivot mounti...

Suspension Bush for the rear lower link (bottom link) of the coil-sprung rear suspension. It presses into the link eye, cushioning the pivot mounti...