Products

Kickdown Cable Assembly for the automatic transmission control. The cable links the throttle to the automatic gearbox, relaying throttle position s...

Distributor Cap for the Ducellier distributor fitted to 2.25 and 2.5 litre four-cylinder petrol engines. Part of the ignition system, the cap seat...

Rotor Arm - Ducellier Type for the ignition distributor assembly. This rotor arm fits the Ducellier-type distributor and rotates inside the distri...

Condenser mounts within the distributor as part of the ignition system. It suppresses arcing across the contact breaker points as they open, prote...

Starter Solenoid for the starter motor on 2.5 litre four-cylinder diesel engines. Mounted on the starter motor within the engine cranking circuit,...

Brake Caliper for the right-hand front wheel, part of the front disc brake assembly in the hydraulic braking circuit. The caliper houses the pisto...

Brake Caliper for the left-hand front wheel, part of the front disc brake assembly in the hydraulic braking circuit. The caliper houses the piston...

Brake Pad Retention Kit - front brake pad retaining hardware for the disc brake assembly. Secures the front brake pads in the caliper on installat...

Side Lamp - front side (parking) lamp in the exterior lighting system. Dome-type front side lamp providing position and marker lighting at the fro...

Front direction indicator lamp for the vehicle lighting system. This unit provides the flashing directional signal function at the front of the v...

Front Flasher Lamp LED

Repair kit KIT-POWER ASSISTED STEERING BOX SEAL

Vacuum Advance Unit for the ignition distributor on the 3.5L V8 petrol engine. This vacuum capsule mounts on the side of the distributor and conne...

Starter Motor for the 2.25L 4-cylinder diesel engine, operating in the engine starting circuit. When energised through the starter solenoid, the p...

Stop/Tail Lamp Assembly for the rear lighting circuit, combining the tail (running) light and stop (brake) light in a single unit. The assembly mo...

Stop/Tail Lamp Assembly for the rear lighting circuit, combining the tail (running) light and stop (brake) light in a single LED unit. The assembl...

Lamp - Indicator - Lighting - Rear

Ignition Coil - high-tension coil in the ignition system. Converts the low-voltage supply into the high-tension voltage required to fire the spark...

Regulator & Brush Assembly - the combined voltage regulator and brush box fitted to Lucas alternators in the charging circuit. The unit mounts...

Injector O-Ring - a sealing ring for the fuel injectors in the electronic fuel injection system. It seals the injector where it locates in its bore...

Corner Fixing Plate - pressed retaining plate for the automatic transmission sump pan, corner position. The sump pan on the ZF four-speed automati...

Straight Fixing Plate - pressed retaining plate for the automatic transmission sump pan, straight (side) position. The sump pan on the ZF four-spe...

Hexagonal Screw - sump pan retaining screw for the ZF four-speed automatic transmission. The screw passes through one of the pressed retaining pla...

Decoke Gasket Set for the cylinder head assembly of the 2.5L four-cylinder turbo-diesel (200/300 TDi) engine. Provides the gaskets and seals requi...

Carburettor Overhaul Kit - service kit for the Weber twin-choke carburettor fitted to the 2.25L and 2.5L four-cylinder petrol engines. The kit is ...

Track Rod End with a right-hand thread, forming part of the steering linkage. The track rod end is the articulating ball joint that connects the t...

Track Rod End with right-hand thread, fitting at the outer end of the track rod within the steering linkage on the Defender, Discovery 1, and Range...

Track Rod End for the steering linkage, with a left-hand thread. The track rod end forms the ball-jointed connection between the steering link and...

Track Rod End Assembly for the steering linkage, connecting the track rod to the steering drop arm and transmitting movement from the steering box ...

Camshaft Bearing Set for the Rover 3.5L V8 petrol engine. Supplies the bearing shells that support the camshaft as it runs within the cylinder blo...

Trunnion kit

Starter Motor for the 3.5L V8 petrol engine, operating in the engine starting circuit. When energised through the starter solenoid, the pinion is ...

Windscreen Clamp - secures the classic fold-flat windscreen frame in its upright position. Mounted at the base of the windscreen frame, the clamp ...

Piston Ring Kit

Piston Ring Set for the 2.5 four-cylinder turbo diesel, forming part of the piston and connecting rod assembly. The ring pack seals the combustion...

Front Sill Panel for the right-hand side of the body, the outer panel running along the lower bodyside below the front door aperture. The sill clo...

Front Sill Panel for the left-hand side of the body, the outer panel running along the lower bodyside below the front door aperture. The sill clos...

Sill Panel for the right-hand side of the lower bodywork, fitting below the door apertures between the front and rear wheel arches. The sill forms...

Bonnet Assembly - the hinged panel that closes over the engine bay at the front of the vehicle. The bonnet mounts to the bonnet hinges and secures...

Rear Door - the rear load (tail) door that closes the back of the body. Supplied unglazed, the door is pre-drilled with mounting holes to accept a...

Water Pump for the 2.25L 4-cylinder engine, operating in the engine cooling circuit. Belt-driven from the crankshaft pulley, the pump circulates c...

Drop Arm for the steering linkage, fitted to the Gemmer steering box output shaft. The splined eye at the upper end clamps onto the box sector sha...

Drop Arm for the Gemmer recirculating-ball steering box, forming the output lever of the steering linkage. The drop arm mounts on the splined sect...

Piston - 2.5L N/A Diesel - 0.020" Oversize for the Defender fitted with the 2.5L naturally-aspirated diesel engine, for use during engine overhaul ...

Piston Assembly for the 2.5 four-cylinder naturally aspirated diesel, machined +0.040 in oversize. The piston transfers combustion pressure to the...

Piston Assembly for the 2.5 four-cylinder naturally aspirated diesel, standard size. The piston transfers combustion pressure to the connecting ro...

Piston Rings - 200TDi - Standard for the 2.5L 200TDi four-cylinder turbo-diesel engine at standard bore dimensions, for use during engine overhaul....