Products

Fuel Filler Grommet seals the joint between the fuel tank filler neck and the body aperture, within the fuel filler assembly. The rubber grommet l...

Spring Washer - 6mm for use across gearbox, clutch and general fastening applications. A helical split spring washer for M6 fasteners, providing r...

Spring Washer, 5/16" - a single-coil split washer fitted under a nut or bolt head to maintain clamp tension. The split coil acts as a spring, exer...

Exhaust Mount Washer from the exhaust mounting hardware. It seats beneath the fastener at an exhaust mounting point, spreading the clamp load acros...

Pump - Fuel Tank

Spring Washer is a split spring washer fitted under a nut or bolt head. Its sprung ends bear against the fastener to maintain tension and resist lo...

HOLDER - BULB - SINGLE POLE - D1/D2/DEF ALL/F1/P38

Bulb Holder - double-filament bulb holder for an exterior lamp assembly, accepting a 5/21W (P21/5W) twin-filament bulb. The holder seats into the ...

Number Plate Lamp for the rear number plate lighting circuit. This complete lamp assembly mounts at the rear of the vehicle to illuminate the numb...

Number Plate Lamp - Chrome is the rear licence plate illumination unit within the rear lighting circuit. It mounts above the licence plate at the ...

Reverse Lamp is part of the rear lighting assembly, mounted at the rear of the vehicle. The lamp illuminates the ground behind the vehicle when re...

Stop & Tail Lamp - 24V is a combined rear stop and tail lamp unit for vehicles running a 24 V electrical system. The unit carries both functio...

Rear Reflector mounts in the rear lamp area as part of the rear lighting and signalling assembly. A passive retroreflector that returns incident l...

Stop Lamp Cover for the high-level (high-mounted) centre stop lamp. This cover forms the outer lens of the high-mounted stop lamp assembly at the ...

Amber Side Repeater Lamp, a body-side lamp that repeats the direction indicator signal. The amber lens flashes in time with the front and rear ind...

Fits Land Rover Defender models (2007-2016) Clear lens wit orange bulb designed for a sleek, modern look

Indicator Switch mounted on the steering column, combining the direction-indicator, headlamp dip and horn functions in a single column stalk contro...

Instrument Panel Mounting for the dashboard instrument binnacle. The mounting carries the binnacle that houses the gauge cluster, locating it with...

Instrument Panel Dash Mounting for the instrument binnacle assembly. This structural mounting bracket secures the instrument panel within the dash...

Speed Sensor - 3-pin variant for the drivetrain speed sensing circuit. The sensor monitors gearbox or transfer box output shaft rotational speed a...

Low Note Horn, a 335 Hz electric horn within the audible warning circuit. Produces the low-frequency tone of a dual-tone horn arrangement, pairing...

Horn low note

Horn high note

Battery Clamp Bolt - fastener for the battery retention assembly. Secures the battery clamp bar across the top of the battery, holding the battery...

Alternator Oil Feed Pipe supplies pressurised engine oil to the vacuum pump integrated at the rear of the alternator, on the Td5 2.5L 5-cylinder tu...

Alternator for the 2.4L Duratorq TD4 four-cylinder turbo diesel charging system, rated at 150 amp output. Belt-driven from the crankshaft pulley, ...

Cylinder Head Dowel for the Td5 2.5L 5-cylinder turbo diesel engine. The dowel locates between the cylinder block and the cylinder head, aligning ...

Side Repeater Bulb Holder for the exterior indicator and side-repeater lighting circuit. The holder fits within the lens housing and provides the ...

Cover fuse box (For the 2 bolts order 2x MTC9968)

Fuse Box Cover - Facia is the moulded cover that closes off the facia-mounted fuse box, concealing the fuse and relay positions behind the dash. I...

Cable Gaiter - Door Wiring is a protective sleeve and grommet fitted at the door aperture of the Defender body, routing the door wiring harness saf...

Tailgate Wiring Harness Grommet is a sealing component within the tailgate wiring assembly. It lines the body aperture through which the tailgate ...

Cable Clip - strap-type retaining clip for cable and harness routing. Secures wiring looms or hoses to body panels or chassis members, preventing ...

Tailgate Harness Bracket - mounting bracket for the rear door (tailgate) wiring harness, part of the rear body electrics harness routing. It suppo...

Hazard Warning Switch, the 12V illuminated rocker switch located on the lower dash switch panel. When pressed it flashes all four direction indica...

Heated Rear Window Switch fitted to the instrument panel facia, this switch activates the heated rear window element, energising the resistive heat...

Hazard Switch - 24V is the dashboard-mounted hazard warning light switch for 24V electrical systems. This switch activates the hazard warning flas...

Rear Fog Lamp Switch is the dashboard-mounted push-button control for the rear fog lamp circuit. This switch allows the driver to activate the rea...

Front Fog Lamp Switch fitted to the instrument panel facia, this switch controls the front fog lamp circuit, allowing the driver to activate the fr...

Cigar Lighter Assembly - facia-mounted 12V cigar lighter, comprising the socket body and the heating element that seats in it. The element is push...

4-Pin Relay is a multi-purpose electromechanical switching relay used throughout the vehicle's electrical system, where a low-current control signa...

Changeover Relay - 5-Pin - Green is a standard 5-pin changeover relay used across multiple electrical circuits. This relay is used in various appl...

Relay, a 70A 4-pin grey mini power relay. It provides high-current make-and-break switching for a heavy electrical load, letting a low-current con...

Drain Plug - Fuel Sedimentor