Products

Timing Belt Tensioner for the 2.5L Td5 5-Cylinder Turbo Diesel engine timing system. The tensioner pulley bears directly against the timing belt a...

Injector O-Ring for the 2.5L Td5 5-Cylinder Turbo Diesel fuel injection system. This O-ring seats in the groove on the injector body at the cylind...

Cam Cover Gasket for the 2.5L Td5 5-Cylinder Turbo Diesel engine. This gasket seals the camshaft cover to the top of the cylinder head, preventing...

Camshaft Cover Grommet sealing the camshaft cover to the cylinder head on the Td5 2.5L five-cylinder turbo diesel engine. The grommet forms a stat...

Air Duct from the fresh-air intake assembly of the 2.5-litre TDi engine. It routes incoming air through the intake system toward the air cleaner h...

Pipe Adaptor is a double-male union fitting in the automatic transmission oil cooler circuit. It joins two pipe runs, carrying transmission fluid ...

Exhaust Bracket locates and supports the exhaust system, securing a section of the exhaust to the underbody to control movement and isolate vibration.

Oil Cooler Hose forms part of the engine oil cooling circuit, carrying oil between the engine and the front-mounted oil cooler. It feeds hot oil t...

Exhaust Clamp a clamp for the exhaust system on 4-cylinder TDi applications. It secures the joint between two exhaust sections, holding the pipes ...

Radiator Top Hose for the 2.5L 300 TDi 4-Cylinder Turbo Diesel engine cooling system. This hose connects the engine coolant outlet at the thermost...

Fan Cowl shrouds the engine cooling fan at the rear of the radiator. It channels the airflow drawn by the fan through the radiator core, improving...

Exhaust Pipe from the rear of the exhaust system on the 2.5-litre 300Tdi engine. This is the rear tailpipe section, carrying exhaust gas from the ...

Air Filter Element is the replaceable filtration element of the engine air intake system. It seats inside the air cleaner housing and traps dust an...

Fuel Tank Bracket for the fuel tank mounting assembly on the Defender. This steel bracket secures the fuel tank to the chassis, forming part of th...

Intercooler Hose - To Inlet Manifold for the 200TDi 2.5L turbocharged diesel engine intercooler circuit. This hose connects the intercooler outlet...

Fuel Tank Adaptor Ring secures the in-tank fuel pump and sender unit assembly into the aperture on the top of the fuel tank. The ring locks the pu...

Fuel Tank Locking Ring for the fuel pump and sender unit assembly. This ring secures the fuel pump and sender unit in the top of the fuel tank, pr...

Fuel Pipe for the 200 TDi diesel fuel delivery circuit. Connects the fuel filter outlet to the injection pump inlet, carrying filtered fuel to the...

Fuel Filter

Hose - Radiator

Turbo Hose for the Td5 2.5L 5-cylinder turbo diesel induction system. Forms part of the air cleaner assembly, ducting filtered intake air from the...

Oil Filter Housing Adaptor - part of the oil filter and oil cooler assembly. It mounts on the oil filter housing and provides the connection betwee...

Front Cover Drain Plate - part of the engine front (timing) cover assembly. It closes and seals the drain aperture at the base of the front cover. ...

Auxiliary Drive Belt Idler Pulley and Arm for 2.25L petrol, 2.5L naturally aspirated diesel, and 2.5L turbo diesel engines equipped with an Adwest ...

Rocker Shaft Locating Bolt for the 2.25L and 2.5L petrol, 2.5L naturally aspirated diesel and 2.5L turbo diesel engines, securing the rocker shaft ...

Core Plug - Cylinder Block Expansion Port is a pressed-steel sealing plug installed in the outer face of the cylinder block to close the casting ap...

Linkage

Stud for the timing cover (front cover) of the 2.5L 4-cylinder diesel engine. The stud locates and clamps the front cover to the cylinder block, p...

Camshaft Oil Seal seals the camshaft on the 2.5L 4-cylinder diesel engines, including the 200TDi. Fitted at the front of the engine where the cams...

Conrod

Throttle Spring - the return spring in the throttle linkage. Acting on the throttle body spindle, it closes the throttle butterfly and returns the ...

Pulley 2 Grooves

Flywheel - 5-Bearing is the rotating mass mounted to the rear flange of the crankshaft in the 5-main-bearing variant of the 2.25L and 2.5L 4-cylind...

Inlet Manifold forms part of the engine air intake system, distributing the intake charge to the cylinder head inlet ports. Fitted to the 2.5-litr...