Products

Spark Plug for the petrol engine ignition system, fitted to the 2.5L four-cylinder and 3.5L/3.9L V8 petrol engines. It screws into the cylinder he...

Spark Plug for the petrol engine ignition system, fitted to the 2.5L four-cylinder and 3.5L/3.9L V8 petrol engines. It screws into the cylinder he...

Sealing Washer is a copper crush washer used to seal banjo and threaded union joints in the fuel system. Fitted at unions such as the injection pu...

Sealing Washer seals the turbocharger oil drain pipe where it meets its adaptor on the engine block. It forms an oil-tight joint in the turbocharg...

Fuel Pipe Clip securing fuel pipe within the fuel delivery system. The clip retains and locates the fuel line along its routing, holding it agains...

Oil Cooler Pipe O-Ring for engine and transmission oil cooling circuits. This O-ring seals pipe fitting and hose connection joints in the oil cool...

Fuel Filler Neck Seal for the fuel filler assembly on the Defender. This rubber seal fits at the joint of the fuel filler neck, sealing the connec...

Radiator - With Oil Cooler and Intercooler - the engine cooling radiator for the 2.5L 200 TDi turbo diesel, combining the coolant radiator, an inte...

Hose Clip clamps a hose onto its spigot or fitting, maintaining a sealed joint under pressure.

Hose

Front Exhaust Downpipe is the leading section of the exhaust system, carrying gas from the turbocharger outlet rearward to the intermediate exhaust...

Exhaust Manifold Heat Shield mounts over the exhaust manifold to protect surrounding components from radiant heat. It deflects heat away from adja...

Fuel Pipe in the fuel supply system of the 2.5L four-cylinder diesel engine. It routes fuel through the supply circuit on installations fitted wit...

Air Filter Element is the replaceable filtration element of the engine air intake system. It seats inside the air cleaner housing and traps dust an...

Hose Clip for radiator hose connections on 4-cylinder TDi diesel engines. This screw-type hose clip secures the upper and lower radiator hoses at ...

Fuel Filler Hose connecting the filler neck to the fuel tank. It carries fuel from the filler point into the tank during refuelling. Fitted to 2.8...

Intake to Dump Valve Hose for the 300TDi 2.5L turbocharged diesel engine on the Defender. This hose connects the air intake duct to the dump valve...

Air Cleaner Hose for the 2.5L TDi engine air cleaner assembly on the Defender. This hose connects within the air cleaner housing assembly, forming...

Oil cooler O-ring V8 small

Fuel Pipe carrying injector leak-off (spill) return from the spill rail back to the rear fuel tank, on 2.5L 4-cylinder diesel applications. It for...

Exhaust Downpipe with Cat is the front section of the exhaust system for the 300TDi engine, incorporating the catalytic converter. It bolts to the...

Oil Cooler Hose - Intermediate forms the middle section of the oil cooler hose run on V8 petrol models fitted with the ZF 4-speed automatic transmi...

Fuel Pump is the in-tank electric fuel pump in the fuel delivery system, mounted within the fuel tank. It draws fuel from the tank and delivers it...

Air intake duct hose Def 2.5DT & 200TDi air cleaner to turbocharger

Fuel Tank Breather Hose for the fuel filler and tank ventilation circuit. Connects the fuel tank to the filler neck, venting the tank so that air ...

Diesel Fuel Filter - Inline for the 2.5L TDi and Td5 2.5L 5-Cylinder diesel fuel system. Fitted at the sedimentor position in the fuel supply line...

Radiator for the 3.5L V8 petrol twin-carburettor engine, the primary heat exchanger in the engine cooling system. Coolant heated by the engine pas...

Exhaust Bracket is a rear exhaust system mounting bracket. It supports and locates the rear section of the exhaust against the chassis, maintainin...

Camshaft Pulley for the 2.5L 4-cylinder naturally aspirated diesel and 2.5L turbo diesel engines. Located at the front of the cylinder head, the c...

Oil Filter / Cooler Adaptor Plug for the oil filter and oil cooler adaptor housing. Seals a port in the oil filter/cooler adaptor. Fits 2.25L and ...

Valve Spring Cap for the cylinder head valve train. The spring cap seats on top of the valve spring and locates against the split collets on the v...

Camshaft O-Ring for the 2.5L four-cylinder diesel engines, including the naturally aspirated diesel, turbo diesel and 200TDi. This O-ring forms th...

Oil seal

Special Bolt for retaining the tappets in the cylinder block, part of the camshaft and tappet assembly. This is a specific-design fastener that se...