Products

Relay operates within the anti-theft alarm and central locking circuit. This relay switches power to the alarm and remote central locking system, ...

Coolant Temperature Sensor threads into the engine coolant circuit and reports coolant temperature to the instrument and engine management systems....

Rear Wiper Blade - the wiper blade for the rear screen wash/wipe system. It clips onto the rear wiper arm and draws its rubber wiping element acro...

Rear Wiper Blade - the wiper blade for the rear screen wash/wipe system. It clips onto the rear wiper arm and draws its rubber wiping element acro...

Headlamp Wash Jet is a single nozzle assembly forming part of the headlamp washer system on the Discovery 1. The jet mounts in the front bumper or...

Bonnet alarm switch assy

Glow Plug Lead for the pre-heat (glow plug) circuit of the 200 TDi and 300 TDi diesel engines. It interconnects the glow plugs and carries the sup...

Switch window lift

Alternator is the charging-system generator that supplies current to the battery and vehicle electrical system. Driven from the crankshaft by the ...

Washer Pump draws fluid from the washer reservoir and delivers it to the windscreen jets. Mounted in the base of the washer bottle, this pump serv...

ABS Pump Relay for the Anti-lock Braking System electrical circuit. A normally open, black-bodied relay that controls power supply to the ABS pump...

lead link pump washer 90/110 used to fit newer style washer pumps to earlier vehicles

Rear Door Wiper Arm for the tailgate wiper system. Mounts to the rear wiper spindle on the tailgate and carries the wiper blade across the rear wi...

Reverse Light Switch for the R380 5-speed manual gearbox, completing the reverse lamp circuit when reverse gear is engaged. This switch threads in...

Wiper Motor Grommet for the rear screen wiper assembly. It seals the aperture in the rear door or tailgate where the wiper motor spindle passes thr...

Alternator for the V8 EFI petrol charging system, rated at 100A. This is the A127-type alternator assembly, belt-driven from the crankshaft pulley ...

Alternator assembly within the engine charging system, installed on the front-end accessory drive and driven by the auxiliary belt to convert mecha...

Link Cable connects the alarm and immobilisation console into the vehicle harness. This wiring link cable joins the anti-theft alarm, central lock...

Alternator - A127-type 100A alternator serving the charging circuit of the 300 Tdi 2.5L turbo-diesel engine. Belt-driven from the crankshaft pulley...

Oxygen Sensor (lambda sensor) for the V8 EFI petrol exhaust system on catalyst-equipped applications. It measures residual oxygen in the exhaust ga...

Rear Bumper Lamp Assembly - left-hand rear lamp unit mounted in the rear bumper, forming the lower section of the rear lighting cluster on the left...

Rear Bumper Lamp Assembly - Clear - left-hand rear lamp unit mounted in the rear bumper, fitted with a clear lens in place of the standard tinted l...

Rear Bumper Lamp Assembly - right-hand rear lamp unit mounted in the rear bumper, forming the lower section of the rear lighting cluster on the rig...

Rear Bumper Lamp Assembly - Clear - right-hand rear lamp unit mounted in the rear bumper, fitted with a clear lens in place of the standard tinted ...

Accelerator Cable for the 200TDi throttle linkage. The cable runs from the accelerator pedal to the throttle lever on the fuel injection pump. Dep...

Rubber Mounting for the body-to-chassis mounting points. The rubber is fitted under the body mounting bolt, seated between the body and the chassis...

Brake hose

Engine Mounting - bonded rubber-to-metal mount within the engine mounting assembly of 4-cylinder Land Rover engines. It locates between the engine...

Front Coil Spring - part of the front road suspension, left-hand side. The spring seats between the lower suspension link and the chassis spring se...

Power Steering Pump - Hobourn-type hydraulic pump serving the power-assisted steering circuit on V8 engines. It is driven from the crankshaft by a ...

Front Bumper - facelift-specification front bumper forming the leading structural and styling member of the front body. It bolts to the chassis fro...

Power Steering Pump is the engine-driven hydraulic pump at the heart of the power-assisted steering circuit on the 300 TDi 2.5L turbo diesel. Belt...

Flexible Clutch Pipe forms part of the clutch hydraulic circuit, connecting the rigid pipework to the clutch slave cylinder. The flexible section ...

Clutch Master Cylinder - the pedal end of the clutch hydraulic circuit. Actuated by the clutch pedal pushrod, it generates the hydraulic pressure t...

Trim Rivet, an 8 x 20mm plastic drive (pin-type) rivet used to secure trim panels and mouldings to the body, typically wheel arch trims, bumpers an...

Front Radius Arm Bump Stop is a travel stop mounted at the front radius arm within the front suspension. It limits axle-to-chassis travel and cush...

Engine Mounting Rubber for the 2.5L 200 TDi engine mounting system. This rubber-to-metal mount locates between the engine mounting foot and the cha...

Clutch Master Cylinder for the clutch hydraulic circuit, installed at the pedal box. The cylinder converts mechanical clutch-pedal movement into h...

Bumper assy rear Disco 1 FROM MA

Upper Spring Isolator for the coil spring suspension. This rubber seat sits at the upper end of the coil spring, between the top of the spring and ...

Brake Pedal Rubber Pad for vehicles with automatic transmission. Fitted over the brake pedal arm in the pedal box assembly, this slip-resistant ru...

Upper Clutch Pipe is the rigid metal section of the hydraulic clutch actuation circuit running from the clutch master cylinder. It carries fluid f...

Bump Stop - rear suspension bump stop that limits the upward travel of the axle at full compression. The moulded rubber block cushions the contact ...

Spring Isolator seats between the coil spring and its mounting platform in the suspension. It cushions the contact between the spring end and the ...

Power Steering Suction Hose for the power steering hydraulic circuit. This low-pressure hose carries fluid from the reservoir to the inlet of the p...

Steering Shaft - the intermediate shaft in the steering column assembly. It links the steering column to the steering box input, transmitting rotat...

Brake Valve for the front brake hydraulic circuit. Regulates hydraulic pressure to the front brakes and is used on both ABS and non-ABS systems.

Gearbox Mounting - right-hand transmission rubber mounting for the 2.5L 300 TDi diesel. This rubber-to-metal mounting supports the gearbox on the ...