Products

Coolant Expansion Tank for the engine cooling system, serving as the pressurised header and overflow reservoir. The tank accommodates coolant expa...

Brake Caliper Locating Pin Kit for the sliding brake caliper. The guide pins let the caliper float on its carrier bracket so both brake pads wear ...

Gasket

Outer Door Handle is the exterior handle for the side doors and fits both front and rear positions. This version is for vehicles equipped with the...

Rear Brake Pipe (Left-Hand) is a rigid hydraulic line in the rear brake circuit. It carries pressurised brake fluid along the chassis to the rear ...

Rear Brake Pipe - right-hand side. Rigid metal brake line in the rear hydraulic circuit, running along the chassis to the rear brake. It carries h...

Radiator Assembly for the engine cooling system, fitted to V6 and V8 petrol applications. The radiator dissipates heat from the engine coolant int...

Condenser Assembly for the air conditioning system, supplied with an integral receiver-drier. Mounted at the front of the vehicle ahead of the rad...

Air-Conditioning O-Ring, 11 x 2.5 mm for the refrigerant circuit. The seal is fitted at the compressor-to-condenser connection, holding a leak-tig...

Transmission Oil Pan & Filter Kit - the lower fluid pan for the ZF 8HP70 8-speed automatic transmission, incorporating an integrated fluid filt...

Ride Height Sensor for the front of the electronic air suspension system. It measures the position of the front suspension arm relative to the body...

Ride Height Sensor for the rear of the electronic air suspension system. It measures the position of the rear suspension arm relative to the body a...

Starter Motor Puma Replacement - Defender

Oil Cooler Tube carries engine oil through the oil cooler circuit. The tube connects the engine oil system to the oil cooler, routing oil to be co...

Front Lower Suspension Arm, right-hand side. Part of the independent front suspension assembly, the lower arm connects the wheel knuckle to the fr...

Front Lower Suspension Arm, right-hand side, for vehicles equipped with Roll Stability Control (RSC). Part of the independent front suspension ass...

Front Suspension Arm, left-hand side, for vehicles equipped with Roll Stability Control (RSC). Connects the wheel knuckle to the front subframe as...

Door Handle Lock Cap for the exterior door handle. It fits over the lock mechanism aperture in the handle, covering and protecting the locking com...

Heater Resistor Control Unit - regulates the speed of the heater blower motor within the HVAC (heating and ventilation) system. It modulates the c...

O-Ring for the air-conditioning refrigerant circuit. Seals a connection in the refrigerant lines, preventing refrigerant leakage at the joint. Rep...

Handbrake Shoe Spring Repair Kit - the springs for servicing the rear parking-brake shoe assembly, the drum-in-hat parking brake integrated into th...

Ensure a smooth and secure installation of LR031947 (SFS500012) with this fitting kit, designed for Discovery 3 (2005-2009), Range Rover Sport (200...

Spark Plug for the ignition system of the 5.0L V8 petrol engine (AJ133), in supercharged and naturally aspirated forms. Installed in the cylinder ...

Injection Pump Leak-Off Tube for the 3.0L V6 diesel engine. It carries leak-off (return) fuel from the high-pressure injection pump back to the fu...

Injector Bolt secures the fuel injector clamp within the cylinder head on the 2.7 and 3.0 V6 diesel engines. The M6 x 35 mm bolt retains the clamp...

Thermostat Housing for the 5.0-litre AJ133 V8 petrol engine, part of the engine cooling circuit. The housing seats the coolant thermostat and form...

Lower Rear Knuckle Suspension Bush for the rear suspension. This bush fits the lower mounting of the rear knuckle (wheel carrier), forming the comp...

Fuel Injector Pipe Clamp for the high-pressure fuel injection system of the 3.0L V6 and 4.4L V8 (SDV8) diesel engines. The clamp secures a high-pr...

Fuel Injector Sealing Washer - seals the fuel injector where it seats in the cylinder head. Fitted at the base of the injector, it forms the combu...

Front Door Handle Cover (Left-Hand, Black) is the trim cap that fits over the outer end of the exterior front door handle, concealing the lock mech...

Thermostat regulates coolant flow within the engine cooling system of the 3.0L V6 diesel. It remains closed during warm-up to bring the engine qui...

Starter Motor for the engine starting system, mounted at the engine-to-transmission bellhousing. When cranking, the integral solenoid drives the p...

Cover - Mirror Housing

Mirror Housing Cover for the left-hand exterior door mirror, the outer cap that fits over the mirror housing. Supplied primed and requires paintin...

Thermostat and Housing for the engine cooling circuit, supplied as the thermostat pre-assembled in its housing. Regulates coolant flow to bring th...

Drive Belt Tensioner - maintains correct tension on the front accessory (auxiliary) drive belt. The sprung tensioner assembly applies constant loa...

Idler Pulley for the secondary drive belt circuit on supercharged petrol engines. The idler is a freely-rotating, sealed-bearing pulley that guide...

Ignition Coil for V6 and V8 petrol engines, mounted directly on the spark plug in a coil-on-plug arrangement. The coil steps up the battery supply...

Fan Bracket for the 5.0L V8 petrol engine (AJ133), supplied complete with idler pulley. The bracket mounts to the front of the engine and carries ...

Secondary Drive Belt Idler guides and maintains tension on the secondary (supercharger) drive belt within the front-end accessory drive. The idler...

Mass Air Flow Sensor is part of the air intake system, mounted in the intake ducting downstream of the air filter. It measures the mass of air dra...

Rear Propshaft for the driveline, transmitting rotational drive from the transfer case output to the rear axle input. Supplied as a complete balan...

Drive Belt Tensioner maintains correct tension on the auxiliary drive belt within the front-end accessory drive. The spring-loaded arm and integra...

Parking Sensor is an ultrasonic sensor for the Park Distance Control (parking aid) system. Mounted in the bumper, it emits and receives ultrasonic...

Exhaust Crossover Pipe carries exhaust gas between the two cylinder banks of the 3.0 V6 diesel engine, routing the outlet of one manifold across th...

Oil Filter and Cooler is a combined assembly within the engine lubrication circuit, integrating the oil filter housing with the engine oil cooler. ...

Lower Inlet Manifold Gasket for the supercharged 3.0L V6 petrol engine. It seals the lower section of the inlet manifold to the cylinder head, seal...