Products

Low Fuel Monitor Unit for 24V electrical systems, operating in the fuel level indication circuit. The unit processes the signal from the fuel tank...

Wiper Blade for the front windscreen, with a stainless steel frame. The blade clears the driver's field of view across the front windscreen. It at...

Heater (Glow) Plug Ballast Resistor for the diesel pre-heat circuit. Wired in series with the heater plugs, the resistor drops the battery supply t...

Speedo cable S3

Windscreen Washer Jet directs washer fluid onto the windscreen as part of the front wash/wipe system. This single jet is bulkhead-mounted and fed ...

Temperature transmitter

Speedometer instrument head for the dashboard instrument panel, incorporating a resettable trip odometer alongside the main total odometer. The sp...

Wiper Arm - front windscreen wiper arm, left-hand. The 5mm is the narrow width of the arm, which sets the wiper-blade fitting - it is not a spindl...

Wiper Arm - front windscreen wiper arm, right-hand. The 5mm is the narrow width of the arm, which sets the wiper-blade fitting - it is not a spind...

Ignition Switch - Diesel - Switch Only is the electrical switch element of the ignition system for diesel applications. It supplies the rotary swi...

Ignition and Starter Switch - the electrical switch unit that mounts to the base of the steering column lock, in the ignition and starting circuit,...

Washer Pump for the windscreen washer system, running on a 24-volt electrical supply. The pump draws fluid from the washer reservoir and delivers ...

Wiper Arm - windscreen wiper arm, left-hand. The 7mm is the wide width of the arm, which sets the wiper-blade fitting - it is not a spindle size. ...

Wiper Arm - windscreen wiper arm, right-hand, wide pattern. The 7mm is the wide width of the arm, which sets the wiper-blade fitting - it is not a...

Wiper Cable Tube - LHD is a guide tube in the cable-and-rack windscreen wiper system, in the left-hand-drive configuration. It houses and routes t...

Electric Fuel Pump mounted externally in the fuel supply system, drawing petrol from the tank and delivering it to the carburettor. This is an ext...

Headlamp for the front lighting system: a 7-inch round unit with a flat glass lens. The lamp takes a replaceable H4 halogen bulb, giving combined ...

Oil Pressure Switch threads into the engine block oil gallery and monitors lubrication system pressure. It operates the low oil pressure warning l...

Rear Fog Lamp forming part of the rear lighting assembly, providing a high-intensity red rear light for use in poor visibility. It operates on its...

Rear Fog Lamp with LED illumination, forming part of the rear lighting assembly, providing a high-intensity red rear light for use in poor visibili...

Reverse Lamp forming part of the rear lighting assembly, providing white illumination to the area behind the vehicle when reverse gear is selected....

Reverse Lamp with a clear lens and LED illumination, forming part of the rear lighting assembly, providing white light to the area behind the vehic...

Headlamp Rim is the outer trim bezel that surrounds and retains the headlamp unit in the front panel, finished in chrome. It locates over the head...

Headlamp Assembly for the front exterior lighting system, supplied as a pair. Each crystal-style halogen unit mounts in the front lighting housing...

Ignition Coil for the ignition system of 4-cylinder petrol engines. The coil steps up the low-voltage supply into the high-tension output that fir...

Steering Box is the recirculating-ball power steering gear at the heart of the steering system, converting rotation of the steering column into the...

Pop Rivet (blind rivet) for fastening panels, trim and brackets where access is only available from one side. The rivet is fitted into a drilled h...

Bumperette - Rear - RH for the rear bumper assembly. This right-hand rear bumperette bolts to the outer end of the rear bumper cross-member, provi...

Bumperette - Rear - LH - Black is the left-hand rear bumperette, a corner protection unit mounted at the rear of the chassis. It bolts to the rear...

Door Capping - Galvanised - RH for the Defender 110 door assembly. This galvanised steel door capping fits along the upper edge of the right-hand ...

Wheel Cap - LH for the Freelander 1 wheel arch assembly. This left-hand wheel capping is a trim component that covers and finishes the wheel arch ...

Mirror Arm for a door-mounted exterior mirror, within the exterior mirror assembly. This is an extended arm of the Wolf (XD) pattern, holding the ...

Wheel Nut securing a road wheel to the hub, clamping the wheel against the hub mounting face. M16 internal thread and steel construction, to the s...

Salisbury Joint Washer for the Salisbury rear axle differential. The gasket seats between the differential carrier and the axle casing, sealing th...

Layshaft Bearing for the Series manual gearbox. It supports the layshaft (countershaft) within the gearbox casing, allowing the constant-mesh gear ...

Lock Washer for the carburettor butterfly spindle. This lock washer secures the retaining nut on the throttle butterfly spindle inside the carbure...

Main Bearing Set - 0.020in Undersize - crankshaft main bearing shells for the 3.5 and 3.9 litre V8 petrol engine, sized for a crankshaft that has b...

Main Bearing Set +0.030" 2,25

Main bearing set for the three-bearing 2.25L four-cylinder engine, forming the crankshaft support in the cylinder block bottom end. The shells loc...

Con Rod Bearing Set for the 2.25L four-cylinder petrol engine. The set provides the big-end shell bearings that carry the connecting rods on the c...

Con Rod Bearing Set - connecting rod big-end bearing shells for the 2.25L four-cylinder engine. The con rod bearings sit between the connecting ro...

Con Rod Bearing Set - connecting rod big-end bearing shells for the 2.25L four-cylinder engine. The con rod bearings sit between the connecting ro...

Connecting rod bearing set - the big-end shells of the 2.25L four-cylinder engine, running between the connecting rod big-end eyes and the cranksha...

Track Rod Assembly - the front steering link that connects the steering arms on the two front swivel housings across the front axle. It holds the ...

Detent Spring for the manual gearbox gear selector mechanism. The spring loads the detent ball against the selector shaft, holding the selected ge...