Products

Crankcase Ventilation Valve (PCV valve) for the crankcase emission control system. It regulates the flow of blow-by gases from the crankcase into ...

Turbocharger Gasket for the 3.6L V8 diesel (Lion) engine. It seals the mounting joint between the turbocharger and its mating flange, holding a ga...

Turbocharger Oil Return Tube Gasket for the 3.6L V8 turbo-diesel (TdV8) engine. It seals the joint at the turbocharger oil return (drain) tube, whe...

EGR Outlet Pipe Gasket for the 3.6L V8 diesel engine (TdV8), used in the exhaust gas recirculation (EGR) system. It seals the outlet pipe joint of...

Fuel Injection Pump Gasket for the 3.6L V8 diesel engine (TdV8), sealing the high-pressure fuel injection pump to its mounting on the engine. It f...

Sealing Ring for the Exhaust Gas Recirculation (EGR) system, measuring 31.03 x 3.5 mm. This O-ring seals a joint in the EGR circuit, containing re...

EGR Sealing Ring for the 3.6L V8 diesel engine (TdV8), used at a pipe joint in the exhaust gas recirculation (EGR) system. This O-ring, 31.03 x 3....

Thermostat Coolant Tube - a rigid coolant pipe serving the thermostat housing in the engine cooling circuit. It carries coolant between the thermos...

Inlet Manifold Air Duct - routes charge air into the inlet manifold as part of the engine air intake, carrying incoming air from the intake system ...

Gasket for the Exhaust Gas Recirculation (EGR) system, sealing the EGR cooler inlet pipe. It seals the joint where the inlet pipe meets the EGR co...

EGR Cooler Gasket for the exhaust gas recirculation (EGR) system on the 3.6L V8 diesel engine. It seals the joint between the EGR cooler and its i...

Water Outlet Connection for the 3.6L V8 TdV8 diesel engine cooling system, mounted at the thermostat housing. It carries engine coolant from the c...

Spark Plug for the 4.4L V8 and 4.2L supercharged V8 petrol engines. It ignites the air/fuel mixture in the combustion chamber. One spark plug is r...

Inlet Manifold for the right-hand cylinder bank of the 3.6L V8 TDV8 (Lion) diesel engine. Mounted to the cylinder head, the inlet manifold distrib...

Inlet Manifold with integrated rocker (cam) cover for the left-hand cylinder bank. Serves the 3.6L TDV8 diesel engine, carrying intake air to the ...

Thermostat for the AJ-V8 petrol engine cooling circuit. The thermostat regulates coolant flow between the engine and radiator. It stays closed dur...

Intake Manifold Gasket - LH seals the intake (inlet) manifold to the cylinder head on the left-hand bank of the 3.6L V8 TdV8 (Lion) turbo-diesel en...

Intake Manifold Gasket - RH seals the intake (inlet) manifold to the cylinder head on the right-hand bank of the 3.6L V8 TdV8 (Lion) turbo-diesel e...

Crankcase Breather Hose forms part of the crankcase emission control (ventilation) system on the 4.4L V8 AJ petrol engine. It carries crankcase bl...

EGR Thermostat Assembly that regulates coolant flow through the exhaust gas recirculation (EGR) cooler on the 2.7-litre V6 and 3.6-litre V8 diesel ...

Heater Hose for the heater circuit of the 4.2L V8 supercharged petrol engine. This moulded hose carries engine coolant between the cooling system ...

Rear Reflector, Right-Hand Side - a passive reflex reflector in the rear lighting assembly. Reflects light from following vehicles to improve rear...

Rear Reflector, left-hand (near-side), the passive retroreflector mounted at the rear of the vehicle. The reflector returns light from a following...

Rear Reflector for the left-hand side of the rear lighting assembly. This is a passive red reflector that returns light from the headlamps of foll...

Oil Cooler and Filter Assembly for the engine lubrication and cooling circuit. The assembly combines the engine oil cooler with the oil filter hou...

Exhaust Clamp - 60mm exhaust joint clamp for the front section of the exhaust system, securing the downpipe to the centre silencer section. Clamps...

Transmission Oil Pan - fluid pan for the ZF 6HP26 / 6HP28 six-speed automatic transmission, forming the base of the transmission casing and holding...

Sensor

Coolant Pipe - Thermostat Housing for the 4.4L AJ-V8 petrol engine - Engine Cooling assembly group. Forms the coolant outlet from the engine and l...

Coolant Hose - inlet tube connector hose in the engine cooling circuit of the 3.6L V8 32V DOHC EFi diesel (Lion TDV8). It carries coolant between ...

Coolant Hose - water outlet hose running to the cylinder head, part of the engine cooling circuit on the 3.6L V8 32V DOHC EFi diesel (Lion TDV8). ...

Heater Hose - coolant hose serving the cabin heating circuit on the 3.6L V8 32V DOHC EFi diesel (Lion TDV8). It forms part of the coolant path bet...

D3S xenon headlamp bulb, supplied with its igniter, for headlamp units originally built as bi-xenon or adaptive xenon assemblies. D3S is a mercury...

O-Ring, 11mm - a sealing ring used in the power steering hydraulic circuit, at the union joints of the pressure supply and return hoses. It seats ...

Brake Calliper - Rear - RH is the right-hand rear brake calliper within the rear braking assembly. It clamps the brake pads against the brake disc...

Brake Calliper - Rear - LH is the left-hand rear brake calliper within the rear braking assembly. It clamps the brake pads against the brake disc ...

Door Trim Name Plate - decorative name plate fitted to the visible face of the inner door trim panel. A cosmetic trim item only; it carries no str...

Ignition Coil for the 5.0L V8 petrol engine (AJ133), part of the ignition coil and spark plug assembly. This is a coil-on-plug unit: it mounts dir...

Timing Gear Bolt from the engine timing drive, securing the camshaft sprocket and variable camshaft timing adjuster to the camshaft. It provides t...

Crankshaft Sprocket Washer from the engine timing drive, fitted at the front of the crankshaft beneath the drive sprocket retaining bolt. It sprea...

Valve Spring Retainer from the cylinder head valve train, the top cap that closes off the valve spring. It sits on top of the valve spring and is ...

Crankshaft Front Oil Seal for the timing gear cover, sealing the crankshaft nose where it passes out through the front cover. It runs on the crank...

Idler Pulley for the primary accessory drive of the 5.0L V8 petrol engine (AJ133). It is a free-running, non-tensioning pulley that routes and sup...

Gasket - Oil Filter to Block seals the joint between the oil filter housing and the cylinder block, within the Oil Cooler and Filter assembly. It ...

Oil Cooler - the oil-to-coolant heat exchanger of the engine's Oil Cooler and Filter assembly. Engine coolant is passed through the cooler core to...

Breather Tube - crankcase ventilation tube within the engine's emission control system. It routes crankcase gases from the engine back into the in...