Products

Oil Drain Plug for the engine oil pan (sump). Threaded into the base of the oil pan, it seals the oil drain point and is removed to drain the engi...

Camshaft Sprocket for the timing drive of the Ingenium engine family - the 2.0L and 3.0L diesel and 3.0L petrol units. Mounted on the end of the ca...

Valve Stem Seal for the cylinder head valvetrain. It seals around the valve stem where it passes through the valve guide, controlling oil entry in...

Exhaust Manifold Gasket seals the joint between the exhaust manifold and the cylinder head, within the exhaust assembly. It contains combustion ga...

Solenoid Valve for the air suspension compressor assembly. It forms part of the compressor and air-line circuit, controlling the flow of compressed...

Manifold Absolute Pressure (MAP) Sensor for the 3.0L V6 diesel engine, mounted in the throttle housing. It measures absolute pressure in the intake...

Coolant Hose – Radiator to Engine Vent Elbow connects the radiator to the engine vent elbow, within the cooling system pipes and hoses. It carries...

Fuel Pump and Sender Unit for the 5.0L V8 petrol engine, in naturally aspirated and supercharged (AJ133) applications. Mounted inside the fuel tan...

Exhaust Clamp secures a joint between two sections of the exhaust system, clamping the adjoining pipes together to form a gas-tight connection whil...

Front Suspension Arm - right-hand lower rear control arm within the front multi-link suspension assembly. The arm locates the front hub carrier to...

Suspension Arm is a front lower control arm - the right-hand rearward (curved) arm that mounts behind the front knuckle. It is one of the two lowe...

Front Suspension Arm - left-hand lower rear control arm within the front multi-link suspension assembly. The arm locates the front hub carrier to ...

Front Suspension Arm - the lower control arm on the left-hand side of the front independent suspension assembly. It links the front subframe to th...

Throttle Body and Motor in the engine air intake system, supplied with an integral electric actuator motor. On this 3.0L V6 diesel, the throttle b...

Crankshaft Pulley mounts on the nose of the crankshaft at the front of the engine and drives the front-end accessory belt. Fitted to the 2.0L 16V ...

Front Door Latch is the locking and release mechanism within the front door lock controls assembly. It engages the body-mounted striker to hold th...

Front Door Latch is the lock latch mechanism that secures the front door to the body. Mounted in the trailing edge of the door, it engages the str...

Front Door Latch - the left-hand (driver side) door latch assembly, mounted in the shut face of the front door. It engages the striker on the body...

Rear Door Latch is the locking and release mechanism within the rear door lock controls assembly. It engages the body-mounted striker to hold the ...

Rear Door Latch is the locking and release mechanism within the rear door lock controls assembly. It engages the body-mounted striker to hold the ...

Rear Door Latch is the lock latch mechanism that secures the rear door to the body. Mounted in the trailing edge of the door, it engages the strik...

Valve Spring Seat is the seat on the cylinder head that locates the base of the valve spring, providing the surface against which the spring is com...

Timing Belt

EGR Outlet Gasket seals the outlet joint of the exhaust gas recirculation (EGR) system, where recirculated exhaust gas leaves the EGR valve/cooler ...

Key Fob Cover Kit provides a replacement outer cover for the remote key fob, renewing a housing that has become worn, cracked or faded. It restore...

Clip secures an exterior body moulding to the body panel. It is a retaining clip used in the body moulding assembly, holding a trim moulding in po...

EGR Valve Gasket seals the exhaust gas recirculation valve to its mating face within the EGR and front exhaust system. Fitted on the left-hand ban...

Drive Belt Tensioner for the front accessory (auxiliary) drive of the 3.0L V6 diesel engine. It maintains correct tension on the drive belt that ru...

Fan Bracket carries the secondary drive belt idler pulley within the front end accessory drive of supercharged petrol engines. It locates the idle...

CV Boot Kit

Crankshaft Gear forms part of the timing gear train, mounted on the crankshaft nose to drive the timing system and maintain synchronisation between...

Number Plate Bracket mounts within the radiator grille and front bumper assembly, providing the fixing point for the front licence plate. It locat...

Water Hose forms part of the engine cooling circuit on the 4.4L DOHC DITC V8 diesel. It carries coolant between the engine and the connected cooli...

Radiator Hose is the top (upper) radiator hose for the 4.4L V8 diesel engine. It carries hot coolant from the engine outlet to the top of the radi...

Radiator Hose is a moulded coolant hose in the engine cooling circuit of the 4.4L SDV8 diesel engine, carrying coolant between the engine and the r...

Circuit Breaker installs within the electrical power distribution system, protecting a circuit against overcurrent by interrupting the supply when ...

Passive Start Module is part of the keyless (passive) start and vehicle anti-theft system. It authenticates the smart key fob and allows the engin...

Wheel Hub is part of the wheel-end assembly at the suspension corner. It carries the wheel bearing and provides the mounting flange for the road w...