Products

Flywheel Drive Plate for automatic transmission applications. This drive plate bolts to the engine crankshaft and couples it to the torque convert...

Oil Filter Housing Cover for the oil cooler and filter housing on the 2.2L DW12 turbo-diesel engine. The cover closes the oil filter housing, reta...

Oil Cooler Return Connector is a connector fitting in the engine oil cooler circuit of the 2.2L diesel engine (DW12). It joins the oil cooler retu...

Bumper Retainer Nut - a push-in retaining nut used in the front bumper, radiator grille and rear bumper assemblies. The retainer clips into a pres...

Front Brake Disc - 300 mm vented, supplied singly; two are required to do the front axle. The vented construction carries internal vanes between t...

D3S xenon headlamp bulb, supplied with its igniter, for headlamp units originally built as bi-xenon or adaptive xenon assemblies. D3S is a mercury...

Throttle Body and Motor - the electronically actuated intake throttle valve for the 2.2L common-rail direct-injection diesel engine, mounted at the...

Exterior mirror motor - left-hand side glass adjustment motor within the door mirror head. The motor sits behind the mirror glass and drives the g...

Clip - retaining clip for the radiator grille and front bumper assembly. It secures the grille and bumper components to their mountings.

Retaining Clip is a fastening clip used in the radiator grille and front bumper assembly. It secures the grille and front bumper trim components t...

Heater Hose for the engine cooling and cabin heating circuit. This hose carries heated engine coolant between the engine and the heater matrix, wh...

Number Plate Bracket for the rear of the vehicle, mounting the registration plate to the luggage compartment door (tailgate). The bracket holds th...

Breather Valve for the axle case or manual transmission housing. The valve vents the housing to atmosphere, allowing internal air pressure to equa...

Axle Oil 75W-90 is a hypoid gear oil for the front and rear differentials and final drive units. The 75W-90 grade lubricates the crown wheel and p...

Mass Air Flow Sensor measures the mass of air drawn into the engine and reports it to the engine control module for fuel metering. It mounts in th...

Glow Plug is a heating element threaded into the cylinder head of the 2.2L CR DI diesel engine, forming part of the pre-heating system. One plug s...

Rocker Cover for the 2.2L DW12 diesel engine, sealing the top of the cylinder head over the camshafts and valvetrain. Also referred to as the cams...

Transmission Oil, 1 litre. Hydraulic fluid specified for the automatic transmission and power steering system. Maintains the hydraulic pressure an...

EGR Cooler Gasket for the 2.2L diesel engine, part of the exhaust gas recirculation (EGR) system. Seals the joint between the exhaust manifold and...

Automatic Transmission Fluid (ATF) for the automatic gearbox and power steering circuit. Specified as the transmission and power steering fluid to...

Hub Nut - M24 x 2.0 for wheel hub and bearing retention. This M24 x 2.0 metric hub nut secures the wheel hub or halfshaft flange onto the stub axl...

Radiator Hose for the engine cooling system. It carries coolant between the engine and the radiator, forming part of the circuit that dissipates en...

Coolant Degas Hose is part of the engine cooling system's degas (deaeration) circuit. It carries coolant and entrained air between the engine or r...

Coolant Expansion Tank is the reservoir within the engine cooling system. It accommodates coolant expansion as temperature rises, provides a fill ...

Air Inlet Hose in the charge-air / intercooler circuit of the turbocharged intake system. It carries pressurised air along the boost path between ...

Shock Absorber Top Mount for the front strut assembly. The top mount secures the upper end of the front strut to the vehicle body, isolating suspe...

Upper Knuckle Bolt is a hex-head bolt that retains the upper knuckle joint within the hub and knuckle assembly. It clamps the upper knuckle to the...

Tube - Outlet

Front Lower Engine Mounting is the lower insulator supporting the engine at the front of the mounting system. It locates the engine to the subfram...

Engine Mounting supports the engine on the subframe and damps vibration transmitted into the body. Fitted to the 2.0L 16V TiVCT turbocharged petro...

Engine Mounting Bolt with hexagonal head, M12 x 112 mm. A structural fastener securing the engine mounting to the subframe; the same bolt is also ...

Auxiliary Battery - a sealed, non-spillable wet-cell battery that serves as the vehicle's secondary power source, separate from the main starter ba...

Cylinder Head Gasket for the 2.0L 16V TiVCT turbocharged petrol engine, sealing the joint between the cylinder head and the engine block. It conta...

Timing Chain Guide for the 2.0L 16-valve turbocharged petrol engine, fitted in the timing gear assembly at the front of the engine. The guide loca...

Oil Filter Adaptor Gasket for the 2.0L 16-valve turbocharged petrol engine, sealing the oil cooler and filter adaptor to the engine. The gasket fo...

Accessory Drive Pulley Bolt for the 2.0L 16-valve turbocharged petrol engine, used in the accessory drive belt system. The bolt secures the access...

Crankshaft Damper Washer for the 2.0L 16-valve turbocharged petrol engine, fitted in the crankshaft damper assembly at the front of the timing gear...