Products

Water Outlet Connection in the engine cooling circuit, part of the thermostat and coolant outlet housing assembly. The connection routes coolant f...

Auxiliary Drive Belt for the front-end accessory drive, the multi-ribbed belt driven by the crankshaft pulley. The belt transmits drive from the c...

Idler Pulley - a drive belt idler in the front-end accessory drive (serpentine belt) system. The idler pulley routes and guides the multi-rib driv...

Kit - O

Crankshaft Seal and Retainer - the rear crankshaft oil seal complete with its retainer housing, sealing the rear of the crankshaft where it exits t...

Rear Brake Caliper - supplied less pads, for the rear axle braking circuit. The caliper houses the pistons that clamp the brake pads against the r...

Fuel Injector Refit Kit - the seals and retainer required when removing and refitting a fuel injector on 3.0L V6 and 5.0L V8 supercharged petrol en...

Cross Member Insulator - a rubber isolating bush fitted between the rear suspension crossmember and the body structure. It cushions the crossmembe...

Timing Gear Bolt - the upper fixing bolt for the timing gear drive on the 3.0L V6 diesel engine. It secures the upper timing gear within the engin...

Bonnet Release Cable transmits the pull from the interior release lever to the bonnet latch. Running from the cabin-mounted release handle to the ...

High Pressure Fuel Pump Tappet drives the engine-mounted high-pressure fuel pump from the camshaft. The tappet acts as the cam follower, riding on...

EGR Outlet Gasket seals the outlet joint of the exhaust gas recirculation circuit. Fitted at the EGR outlet flange, it seals the connection carryi...

Nut - a fixing nut used at the turbocharger and exhaust manifold joint. It retains the turbocharger to the exhaust manifold, a high-temperature jo...

Battery Management System sensor for the negative battery terminal, forming part of the vehicle's battery monitoring and charge-control circuit. I...

Exhaust Crossover Pipe for the 3.0L V6 diesel, part of the front exhaust assembly. It carries exhaust gas from one cylinder bank across the engine ...

Front Strut Boot Kit renews the protective gaiter and mounting hardware for a front air suspension strut, part of the four-corner air suspension sy...

Retainer and Nut - an M10 nut and its retainer used at the front crossmember mounting. The retainer locates and holds the captive nut in position ...

Front Brake Disc for the front axle, matched to the size-19 front brake configuration. It mounts to the front wheel hub and rotates with the wheel...

Idler Pulley guides and routes the accessory drive belt at the front of the engine. It maintains belt alignment and wrap across the auxiliary (sec...

Drive Belt Tensioner for the secondary (supercharger) belt drive fitted to the supercharged petrol V6 and V8 engines. It uses a spring-loaded pivot...

Vacuum Pump Seal seals the joint between the vacuum pump and the engine. It prevents oil and vacuum leakage at the pump mounting face, maintaining...

Oil Cooler for the 5.0-litre supercharged V8 petrol engine (AJ133). It forms part of the engine lubrication circuit, transferring heat from the eng...

Tailgate Switch operates within the powered tailgate and luggage compartment locking controls. The switch signals tailgate release, actuating the ...

Oil Filter and Cooler is a combined assembly within the engine lubrication circuit, integrating the oil filter housing with the engine oil cooler. ...

Fuel Supply Manifold distributes fuel to the injectors on the left-hand cylinder bank of the 3.0L V6 diesel engine. It forms part of the engine's ...

Inlet Valve - a cylinder head intake valve for the 3.0L supercharged V6 petrol engine. It seats in the cylinder head intake port and opens on the ...

Intake Manifold Gasket - the upper intake manifold gasket for the 3.0L supercharged V6 petrol engine. It seals the upper intake manifold joint, ke...

Lower Inlet Manifold Gasket for the supercharged 3.0L V6 petrol engine. It seals the lower section of the inlet manifold to the cylinder head, seal...

Primary Fuel Filter for the 3.0L V6 diesel engine. The primary filter sits in the front fuel supply line and removes contaminants and water from th...

Front Seat Cushion Heating Element - the heating pad fitted within the cushion (base) of a front seat. It forms part of the heated-seat circuit, wa...

Crankshaft Seal - Rear - 1.5 mm seals the rear of the crankshaft where it exits the cylinder block at the flywheel and drive plate end. Supplied c...

Tube - Active Roll Bar System

Front Bumper - complete front bumper assembly supplied with the integrated radiator grille section. The bumper mounts across the front of the body...

Coolant Hose - throttle body heater outlet hose within the engine cooling circuit. The hose routes engine coolant from the throttle body heater ou...

Variable Valve Timing Solenoid - oil control solenoid for the variable valve timing system. The solenoid regulates engine oil flow to the camshaft...

Name Plate, moulded plastic. Exterior name plate / badge fitted to the bodywork as a factory identification marking.

Throttle Housing Gasket - seals the throttle body to the intake manifold. Forms the air-tight joint between the electronic throttle housing and th...