Products

Inlet Manifold Gasket for the 1.8L K-Series petrol engine, fitted in the induction system between the inlet manifold and the cylinder head. It sea...

Non-Return Valve for the V8 petrol engine, fitted to the inlet manifold vacuum take-off. The valve allows air to be drawn one way from the vacuum ...

Breather Hose connecting the camshaft cover breather outlet to the inlet manifold on the 2.5L KV6 petrol engine. Part of the crankcase ventilation...

Crankcase Breather Hose for the 2.5L KV6 petrol engine, part of the crankcase ventilation system. It carries blow-by gases from the cylinder head ...

Breather Hose for the 300 TDi crankcase ventilation system. The hose carries crankcase breather (blow-by) gases from the engine breather outlet ba...

Oil Filter - cartridge type filter element for the 4.4L M62 V8 petrol engine, fitted in the oil cooler and filter housing. It filters the full flo...

Oil Filter for the Td5 2.5L five-cylinder turbo diesel. Part of the engine lubrication system. The filter is a replaceable cartridge element that ...

Radiator Cap - screw-on pressure cap for the coolant expansion tank in the engine cooling system. The cap seals the expansion tank and holds the c...

Lower Timing Cover Gasket - sealing gasket for the joint between the lower timing cover and the cylinder block on the AJ-series 4.4L V8 and 4.2L su...

Bolt

Hex-Head Bolt and Washer - bolt and washer assembly used in the front suspension and subframe area. The fastener secures front cross member, stabi...

Sump Plug Washer for the 3.2L DOHC MPI petrol inline-six engine. This sealing washer fits under the sump drain plug to seal the oil pan drain threa...

Anti-Roll Bar Bush for the suspension stabiliser system. This rubber insulator clamps the anti-roll bar to its mounting, locating the bar while all...

Engine Bay Insulator

Spark Plug for the 4.0L Cologne V6 (SOHC) EFI petrol engine. The spark plug threads into the cylinder head and delivers the ignition spark to the ...

Crankshaft Position Sensor - engine management sensor located at the crankshaft, reading a toothed reluctor ring driven by the crankshaft. The sen...

Indicator Bulb - PY21W amber signal bulb, 12V 21W, fitted to the direction indicator lamp units. The amber envelope provides the signal colour req...

Air Cleaner Housing Insulator locates and cushions the air cleaner (air box) assembly on its mounting. The rubber insulator secures the air cleane...

Sealing Ring - oil seal at the input of the AWF21 six-speed automatic transmission, sealing around the torque converter hub where it enters the tra...

Sealing Ring

Radiator Hose - upper radiator hose in the engine cooling circuit. Connects the engine coolant outlet to the top inlet of the radiator, forming th...

Coolant Hose - bottom expansion tank hose in the engine cooling circuit. Runs from the lower outlet of the coolant expansion (supply) tank to the ...

Coolant Hose Assembly - heater outlet to thermostat housing hose in the engine cooling circuit. Returns coolant from the heater matrix outlet to t...

Coolant Hose from the EGR cooler to the heater inlet, part of the engine cooling and exhaust gas recirculation circuit. The EGR cooler is coolant-...

Coolant Hose between the radiator and the coolant expansion tank. This is the overflow connection of the cooling system: coolant displaced from th...

Exhaust Gasket for the flanged joint between the exhaust front pipe and the catalyst section. It seals the bolted flange where the front pipe meet...

EGR Cooler for the 2.2L DOHC DW12 turbo diesel engine, part of the exhaust gas recirculation circuit. The cooler is a coolant-fed heat exchanger: ...

ABS Speed Sensor for the rear wheel, part of the anti-lock braking system. The sensor measures rear wheel rotational speed and feeds the ABS contr...

Flanged hex head bolt, M6 x 40mm. A flanged-head fastener used at bracket and mounting points around the vehicle. The integral flange under the he...

Bolt for the adjustable rear suspension arm on the Freelander 2 and Range Rover Evoque. This M14 × 85mm special bolt secures the adjustable rear a...

Rear suspension bump stop - part of the rear damper and coil spring assembly. The moulded rubber bump stop fits over the shock absorber piston rod...

Parking brake operating lever (shoe expander) for the rear drum-in-disc parking brake assembly. The lever is mounted to the parking brake shoe and...

Oil Filter - engine oil filter element for the 2.2L Td4 diesel engine, supplied with its sealing ring. The element fits inside the filter housing ...

Glow Plug for the 2.2L Td4 diesel engine. Fitted to the cylinder head, it pre-heats the combustion chamber to aid cold starting and is controlled ...

Thermostat Housing - coolant outlet housing in the engine cooling circuit of the 2.2L Td4 diesel engine. The housing mounts to the engine and carr...