Products

Oil Drain Plug for the engine oil pan (sump). Threaded into the base of the oil pan, it seals the oil drain point and is removed to drain the engi...

O-Ring sealing a turbocharger oil and coolant connection within the turbocharger lubrication and cooling circuit. It seals the union at the turboc...

O-Ring sealing a turbocharger oil and coolant connection within the turbocharger lubrication and cooling circuit. It seals the union at the turboc...

Valve Rocker Arm for the cylinder head valvetrain. It transfers camshaft lift to the valve, actuating the valve as the camshaft rotates. Fitted to...

Valve Stem Seal seals the valve stem where it passes through the valve guide in the cylinder head of Ingenium diesel engines. Fitted over the top ...

Camshaft Position Sensor monitors camshaft rotation for the engine management system. Mounted in the cylinder head and camshaft cover, it signals ...

MAP Sensor is the manifold absolute pressure and charge-air temperature sensor mounted in the inlet manifold. It reports intake manifold pressure ...

Cylinder Head Bolt for Ingenium petrol engines (1.5L AJ20P3, 2.0L AJ200 / AJ20P4, 3.0L AJ20P6 / AJ22P6). The bolt clamps the cylinder head to the ...

Fuel Injector Sealing Washer for the fuel injection system. Seals the fuel injector against the cylinder head, maintaining the combustion seal and...

Fuel Injector Sealing Washer for the fuel injection system. Seals the fuel injector against the cylinder head, maintaining the combustion seal and...

Mass Air Flow Sensor in the engine air intake system, fitted in the intake tract between the air filter and the throttle and turbocharger inlet. It...

Screw - a fastener used to secure exterior body panels and trim, including body mouldings, front and rear bumper assemblies, radiator grille panels...

Pump - Water Hepu

Drive Belt - V-belt in the front-end accessory drive of the 3.0L Ingenium six-cylinder petrol engine, driving the belt-integrated starter generator...

Fuel Injector for the 3.0L AJ20D6 Ingenium six-cylinder diesel engine in high-output specification, part of the high-pressure common rail fuel inje...

Bolt for the camshaft timing gear, part of the Ingenium engine timing drive. It retains the timing sprocket to the camshaft, transferring drive fr...

Ceramic Glow Plug - cold-start heating element from the diesel pre-heat system, threaded into the cylinder head with the tip projecting into the co...

Rod - Spindle Connecting

Exhaust Gas Pressure Sensor for the 3.0L AJ20D6 Ingenium six-cylinder turbo diesel, operating within the exhaust gas recirculation and aftertreatme...

Oil Filter Element for the 3.0L AJ20 / AJ22 Ingenium six-cylinder engine, fitted in the engine lubrication circuit. The cartridge element seats in...

Oil Filter Element for the 3.0L AJ20 / AJ22 Ingenium six-cylinder engine, fitted in the engine lubrication circuit. The cartridge element seats in...

Exhaust Gas Pressure Sensor - measures gas pressure in the exhaust gas recirculation circuit, mounted on the right-hand side of the engine. The en...

Oil Pressure Switch from the engine lubrication system. The switch threads into an oil gallery and monitors lubricating oil pressure, signalling t...

Ball Stud - Tailgate Strut - the ball pivot that a tailgate (luggage compartment door) gas strut socket clips onto. It threads into the body apert...

DEF Injector Refit Kit

O-Ring for the high-pressure diesel fuel injection pump. The ring seals the joint between the pump body and its mounting face on the engine, preve...

Accessory Drive Belt - multi-ribbed belt in the front end accessory drive. Driven from the crankshaft pulley, it transmits drive to the engine anc...

Drive Belt for the accessory drive at the front of the engine. A multi-ribbed poly-V belt that takes drive from the crankshaft pulley and turns th...

Front Brake Disc, internally vented, providing the friction surface of the front brake assembly. The disc mounts on the wheel hub flange and runs ...

Front Brake Disc, internally vented, providing the friction surface of the front brake assembly. The disc mounts on the wheel hub flange and runs ...

Front Brake Pad Wear Sensor, part of the front brake pad and caliper assembly. The sensor is a sacrificial wire loop held in a moulded carrier tha...

Brake pad wear sensor for the rear brakes, forming part of the brake pad wear warning circuit. The sensor is a wire loop carried in a moulded body...

Brake Disc Solid

Brake disc for the rear axle, 350mm diameter, internally vented. The disc mounts to the rear wheel hub and provides the friction surface clamped b...

Cabin air filter for the exterior side of the heating and air conditioning housing. The filter sits in the fresh air intake path, upstream of the ...

Cabin air filter for the interior side of the heater and air conditioning main unit, built with PM2.5-rated filter media. The filter is the final ...

Cabin air filter for the interior side of the heater and air conditioning main unit, standard specification. The filter is the final stage of filt...

Knock Sensor for the engine management system, mounted on the rear face of the cylinder block. Petrol applications only - Ingenium AJ200P, AJ20P an...

Screw - threaded fastener used in body and chassis assembly.