Products

HD Half Shafts - Front - Pair

HD Half Shafts - Rear - Pair

Electronic Differential Lock (E-Locker) replaces the standard open differential assembly within the axle, providing driver-selectable full differen...

Switch mounting bracket for a single differential lock switch, forming part of the electric locking differential control circuit. The bracket give...

Switch mounting bracket for two differential lock switches, forming part of the electric locking differential control circuit. The bracket gives b...

Front Shock Absorber damps the front suspension within the suspension assembly, valved for a +2" (50mm) raised ride height. Fitted with a remote r...

Rear Shock Absorber damps the rear suspension within the suspension assembly, valved for a +2" (50mm) raised ride height. Offers 8-stage adjustabl...

Shock Absorber - 8-stage adjustable remote-reservoir damper for the front or rear suspension. Monotube construction with a 20 mm double chrome-pla...

Turret Securing Rings - Front are reinforcement rings that fit around the front shock absorber top mount aperture in the inner wing. They distribut...

Shock Turret forms the upper mounting point for the front shock absorber on the chassis, within the front suspension assembly. Tubular fabricated ...

Terrafirma rear spring retaining plates 90/D1/RRC

Radius Arm - front axle locating link in the coil-sprung front suspension. The radius arm ties the front axle to the chassis, controlling fore-and-...

Cranked Rear Radius Arm - links the rear axle to the chassis, controlling fore-and-aft axle location and reacting drive and braking torque. The cr...

Shock Dropper - Rear - Pair: zinc-plated steel relocated rear shock absorber top mounts that lower the upper mounting point by 50mm. By relocating...

Twin Shock Mount Kit - Rear provides the additional mounting points required to run twin rear shock absorbers on each side of the rear axle. The ad...

Front twin shock mounting kit for the front damper mounting assembly, allowing two shock absorbers to be fitted per side - four dampers across the ...

Bump stop spacers, supplied as a pair, fitted between the chassis bump stop mounting and the bump stop itself. Each spacer packs the bump stop dow...

Front Spring Spacers fit between the front axle and the base of the front coil spring to raise the spring mounting point. The spacers are 50mm (2 ...

Rear Coil Spring Spacers, +2" - a pair of suspension spacers for the rear coil springs that raise ride height by approximately 2 inches (50 mm). E...

Rear Top Shock Mount Relocator - repositions the upper rear shock absorber mounting 50 mm (2 in) lower on the chassis. Dropping the top mount incr...

Top Shock Mount - upper shock absorber mounting for extreme long-travel suspension. This mount repositions the upper shock pickup point to accept ...

Long-Travel Spring Relocation Cone - replaces the standard coil spring seat so the spring can dislocate (drop out of its seat) at full axle droop a...

Rear Relocation Cones - Axle - Pair

Steering Damper Relocation Kit enables the steering damper to be repositioned from the track rod to the drag link - the mounting position used on t...

Radius Arm - front axle locating link in the coil-sprung front suspension, tying the front axle to the chassis and controlling fore-and-aft axle lo...

Creeper Joint Rear Radius Arms (PR) for 90/110/130/Discovery 1/RRC

Front Shock Absorber Mounting Kit for long-travel monotube dampers, forming the upper turret and lower axle mounting points of the front suspension...

Hydraulic Bump Stop Mounting Kit - Front is the front-axle mounting hardware for a hydraulic bump stop installation, sitting within the suspension ...

Hydraulic Bump Stop Mounting Kit - Rear is the rear-axle mounting hardware for a hydraulic bump stop installation, sitting within the suspension bu...

De-cat front downpipe for the front section of the exhaust system, replacing the original catalytic converter downpipe between the turbocharger out...

Goodridge Brake Hose Kit - +2"

Wind Deflectors - Set of 4 - RRC

Silicone Turbo & Intercooler Hose Kit - a three-piece set of silicone charge-air hoses for the 300Tdi turbo and intercooler circuit, replacing ...

Silicone Intercooler & Turbo Hose Kit - a set of silicone charge-air hoses for the 300Tdi turbo and intercooler circuit, replacing the standard...

Rear Axle Reinforcing Kit - a four-piece set of pre-cut, weld-on reinforcing sections for the rear axle casing, profiled to suit the long-nose Rove...

Front Axle Reinforcing Kit - a two-piece set of pre-cut, weld-on reinforcing sections for the front axle casing, profiled to suit the long-nose Rov...

Differential Guard - 5 mm steel underbody guard that shields the differential housing and nose-piece from impact damage on rock and rutted ground. ...

Steering Damper - Heavy Duty Type for the steering linkage assembly on Discovery 1 and Range Rover Classic. This hydraulic damper is mounted betwe...

Steering Damper - 4-Stage Adjustable for Land Rover Defender 90, 110, and 130. This hydraulic steering damper mounts between the axle and chassis ...

Return to Centre Steering Damper for installation within the steering linkage assembly. This unit mounts between the axle steering arms and the st...

Terrafirma diff guard 90/110/130/D1/RRCFront for RHD & LHD vehicles

Fitment:  Defender van 1994 tot 2007 Discovery 1 van 1989 tot 1994 Range rover Classic

Steering guard in zinc-plated steel, part of the underbody protection group. It bolts beneath the front of the chassis to shield the steering box,...

Drive Flange for the front hub assembly. The drive flange bolts to the outer face of the hub and engages the splined end of the axle half shaft, t...

Drive Flange for the front hub assembly. The drive flange bolts to the outer face of the hub and engages the splined end of the axle half shaft, t...

Drive Flange Nut - replacement centre nut for the heavy-duty thin-type drive flange, black finish. The drive flange sits at the outer end of the f...

Hub Nut for the front hub and drive flange assembly. This threaded nut secures the hub components, serving as the replacement retaining fastener a...