Products

Shock Absorber - 8-stage adjustable remote-reservoir front damper for raised and long-travel suspension. Monotube construction with pin mountings ...

Shock Absorber - 8-stage adjustable rear damper, left-hand side, with a piggyback reservoir. 52 mm zinc-plated monotube body and reservoir, pin mo...

Shock Absorber - 8-stage adjustable rear damper, right-hand side, with a piggyback reservoir. 52 mm zinc-plated monotube body and reservoir, pin m...

Rear Bumper - steel replacement rear bumper in the Raid style, forming the rear impact and recovery structure in place of the original bumper and v...

Shock Absorber - 2.5" smooth-body competition damper with 12" of travel, for front or rear use in long-travel suspension builds. Monotube construc...

Damper Rod - replacement 12" shaft for the 2.5" smooth-body competition damper (TF488), supplied as a rebuild service part. The rod carries the pi...

Dislocation Cone - zinc-plated steel cone that seats inside the top coil of the front spring, forming part of the front coil spring location. When...

Front Crossmember Spacer Kit - alloy spacers that reposition the bolt-on front chassis crossmember to clear the front propshaft. Fitting long trav...

Raid Style Front Winch Bumper - a tubular replacement front bumper with an integrated winch mounting bed. The tubular frame and swaged infill pane...

Raid Style Rock Sliders - tube-construction sill bars that protect the sills and lower body sides from rock and obstacle damage. The bars carry a ...

Hydraulic Bump Stop & Mounting Kit - Front

Rear Hydraulic Bump Stop and Mounting Kit - a bolt-on rear installation that replaces the standard rubber bump stop with a damped hydraulic unit. ...

Air Conditioning Retrofit Kit - a complete air conditioning installation for the Td5 2.5L 5-cylinder turbo diesel, in left-hand drive configuration...

Long Travel Watts Linkage Link Rods - a pair of extended, curved link rods for the rear axle Watts linkage. Lateral location of the rear axle is c...

Return to Centre Steering Damper Mounting Kit - front mounting hardware that allows a return to centre steering damper to be fitted in place of the...

Heavy duty rear door spare wheel carrier, part of the rear door spare wheel mounting assembly. It replaces the original door-mounted carrier and bo...

Turret Securing Rings - Front are reinforcement rings that fit around the front shock absorber top mount aperture in the inner wing. They distribut...

Shock Turret forms the upper mounting point for the front shock absorber on the chassis, within the front suspension assembly. Tubular fabricated ...

Gearbox and transfer box lever set, forming the visible upper section of the gear change assembly. Machined alloy levers with a silver painted fini...

Terrafirma rear spring retaining plates 90/D1/RRC

Spring Retaining Plate - Rear for the rear coil spring seating assembly on Defender 110 and 130. Coil springs can become dislodged from their axle...

Radius Arm - front axle locating link in the coil-sprung front suspension. The radius arm ties the front axle to the chassis, controlling fore-and-...

Cranked Rear Radius Arm - links the rear axle to the chassis, controlling fore-and-aft axle location and reacting drive and braking torque. The cr...

Rear Spring Dislocation Cone - seats into the base of the rear coil spring mount and allows the spring to unseat (dislocate) cleanly at full axle d...

Shock Dropper - Rear - Pair: zinc-plated steel relocated rear shock absorber top mounts that lower the upper mounting point by 50mm. By relocating...

Twin Shock Mount Kit - Rear provides the additional mounting points required to run twin rear shock absorbers on each side of the rear axle. The ad...

Front twin shock mounting kit for the front damper mounting assembly, allowing two shock absorbers to be fitted per side - four dampers across the ...

Bump stop spacers, supplied as a pair, fitted between the chassis bump stop mounting and the bump stop itself. Each spacer packs the bump stop dow...

Front Spring Spacers fit between the front axle and the base of the front coil spring to raise the spring mounting point. The spacers are 50mm (2 ...

Rear Coil Spring Spacers, +2" - a pair of suspension spacers for the rear coil springs that raise ride height by approximately 2 inches (50 mm). E...

Rear Top Shock Mount Relocator - repositions the upper rear shock absorber mounting 50 mm (2 in) lower on the chassis. Dropping the top mount incr...

Top Shock Mount - upper shock absorber mounting for extreme long-travel suspension. This mount repositions the upper shock pickup point to accept ...

Long-Travel Spring Relocation Cone - replaces the standard coil spring seat so the spring can dislocate (drop out of its seat) at full axle droop a...

Rear Relocation Cones - Axle - Pair

Rear Relocation Cones - Axle - Pair

Front Shock Turret - Skeleton, +2 in - fabricated upper front shock mounting turret standing 50 mm (2 in) taller than the standard pressed turret. ...

Front coil spring retaining plates, supplied as a pair, forming part of the lower coil spring mounting at the axle. The plate clamps across the ba...

Front Spring Spacers fit between the front axle and the base of the front coil spring to raise the spring mounting point. The spacers are 50mm (2 ...

Rear Spring Spacer - +50 mm - locates between the rear coil spring and its upper seat to raise rear ride height by 50 mm. The spacer adds standing...

Steering Damper Relocation Kit enables the steering damper to be repositioned from the track rod to the drag link - the mounting position used on t...

Radius Arm - front axle locating link in the coil-sprung front suspension, tying the front axle to the chassis and controlling fore-and-aft axle lo...

Front radius arms with 3 degree caster correction, supplied as a pair. The radius arm is the longitudinal locating link between the front axle and ...

Creeper Joint Rear Radius Arms (PR) for 90/110/130/Discovery 1/RRC

Creeper Joint - For TF532

Skeleton Front Shock Absorber Turrets are the upper mounting towers for the front shock absorbers, bolting to the front chassis rails. The open tu...

Front shock absorber turrets, skeleton type, 30 mm extended, supplied as a pair. The turret carries the upper mounting eye of the front damper and ...

Coil spring trim spacers, 5 mm, fitted between the lower spring mounting plate and the axle to make fine ride height adjustments. Spacers are stac...

Front Shock Absorber Mounting Kit for long-travel monotube dampers, forming the upper turret and lower axle mounting points of the front suspension...