Land Rover Freelander Parts

Wheel Spanner with a 27 mm socket, a hand tool for removing and refitting wheel nuts. Engages the 27 mm hexagon of the wheel nut to loosen or tigh...

Flanged Locking Nut, M10. General-purpose threaded fastener. The integral flange spreads the clamp load over a wider bearing area, removing the ne...

Oil Drain Plug threads into the drain port at the base of the engine sump, sealing the oil pan against leakage during operation. It sits within the...

Fuel Tank Locking Ring for the fuel pump and sender unit assembly. This ring secures the fuel pump and sender unit in the top of the fuel tank, pr...

Relay, a 70A 4-pin grey mini power relay. It provides high-current make-and-break switching for a heavy electrical load, letting a low-current con...

Wheel Spanner - 24mm for removing and fitting wheel nuts on Land Rover vehicles. This 24mm spanner is sized for the standard wheel nut used across...

Dust Cap is the small protective cover that fits over a hydraulic bleed nipple in the braking system. Pushed onto the bleed screw of a brake calip...

Stud - M10 x 25mm, a threaded fastening stud used across a range of Land Rover assemblies. The stud provides a fixed threaded mounting point, allo...

Rear Reflector a passive retroreflective marker mounted at the rear of the vehicle. It reflects the headlights of following traffic so the rear of...

Breather filter (M47 2.0L I4 16V Diesel) (M57 D30 3.0 Diesel)

Fuel Injector Sealing Washer - seals the fuel injector where it seats in the cylinder head. Fitted at the base of the injector, it forms the combu...

Exhaust Gasket sealing a flanged joint in the exhaust system on Land Rover and Range Rover models fitted with the 2.7L TDV6, 3.0D V6, 2.2D, and 4.4...

Crankshaft Seal - Rear is the oil seal at the flywheel end of the crankshaft, sealing the rear main bearing area. This seal prevents engine oil fr...

Fuel System Gasket within the multi-point injection assembly. This flat sealing gasket maintains the integrity of the fuel injection circuit at th...

Fuel pump diesel replacement

Kinetic Recovery Rope - vehicle recovery accessory for extracting a bogged or stuck vehicle. Unlike a static strap, a kinetic rope stretches under...

Towing Jaw rated to 3.5 tonnes, part of the towing/pintle hitch assembly. It provides the jaw coupling for trailer and recovery towing, mounting t...

Fuel Tank Sender Wrench is a special service tool for the fuel tank sender unit assembly. It engages the metal locking ring that retains the fuel ...

LED Driving Light - round auxiliary driving light with a 4" (100mm) diameter housing and 50W LED output. Intended for external mounting as a suppl...

Radiator tank assembly (Use Cap PCD000090/PCD500030)

Front Fog Lamp Bulb - H11 halogen capsule rated 12V 55W, operating in the exterior lighting system. The H11 uses the standardised PGJ19-2 base, wh...

Oil Filler Cap for the engine oil filler neck on the camshaft cover, within the engine lubrication and crankcase ventilation assembly. The cap sea...

Blade Fuse rated at 30 A. Standard blade-type fuse for the vehicle fusebox. It protects a single circuit by melting its internal element when curr...

Blade Fuse - 5A is a 5-amp plug-in automotive blade fuse used in the vehicle fuse and relay boxes to protect an electrical circuit. It seats in a ...

Connector

O-Ring, 11mm - a sealing ring used in the power steering hydraulic circuit, at the union joints of the pressure supply and return hoses. It seats ...

Ancillary drive belt guard - protective guard fitted at the auxiliary drive belt, in the water pump and alternator pulley area. It shields the bel...

Brake Caliper Guide Pin Dust Cover for the front and rear brake calipers. The boot fits over the caliper guide pin and seals against the carrier b...

Parking Sensor for the park distance control (PDC) system, used in both front and rear bumper positions. The sensor mounts into its aperture in th...

Blade Fuse rated at 10 A, colour-coded red to match its rating. This standard automotive blade fuse plugs into the vehicle fuse box and protects it...

Air Conditioning O-Ring, 13.7 x 2.5mm, for the R134a refrigerant circuit. It seals a line connection in the front air-conditioning system on the c...

Inlet Manifold Gasket sealing the inlet manifold to the cylinder head. Seals the charge-air path between the manifold and the head on the 2.0L Td4...

Mirror Housing Cover for the exterior door mirror assembly, left-hand side. The cover is the outer cap that fits over the mirror housing to enclos...

Mirror Housing Cover for the exterior door mirror assembly, right-hand side. The cover is the outer cap that fits over the mirror housing to enclo...

Camshaft Position Sensor monitors the rotational position of the camshaft and reports it to the engine ECU. The ECU uses this signal to identify c...

Exhaust Mounting Rubber Insulator fitted within the exhaust system support assembly to suspend and isolate exhaust pipe sections from the vehicle b...

Mass Air Flow Sensor - air mass meter fitted in the induction tract as part of the engine management system. The sensor sits in the intake ducting...

Depression Control Valve mounted on the camshaft cover of the diesel engine. It regulates the internal depression (vacuum) of the engine, maintain...

Winch Remote Control operates an electric recovery winch wirelessly, allowing the operator to stand clear of the winch line during recovery. Wirel...

Portable Jump Starter and Air Compressor - a handheld 12V power pack combining a battery jump starter, power bank, tyre inflator and LED work light...

Wing Mirror Covers are a pair of chromed upper caps for the exterior door mirror assembly. Each cover fits over the upper section of the existing ...