Land Rover Freelander Parts

Rear Reflector for the left-hand side of the rear lighting assembly. This is a passive red reflector that returns light from the headlamps of foll...

Air Conditioning O-Ring - a sealing ring for the air conditioning refrigerant circuit. It seals the joints between refrigerant lines and component...

Sealing Ring - the right-hand outer seal for the front axle case, part of the front driveline. It seals the point where the front driveshaft passe...

Coolant Hose for the expansion tank in the engine cooling system. This overflow hose connects to the coolant expansion (header) tank, accommodatin...

O-Ring, 11mm - a sealing ring used in the power steering hydraulic circuit, at the union joints of the pressure supply and return hoses. It seats ...

Thermostat and Housing assembly for the 2.0L 16V TIVCT turbocharged petrol (GTDi) engine. The thermostat regulates coolant flow to bring the engine...

Cylinder Head Bore Plug - the front bore (core) plug fitted to the cylinder head of the 3.2L DOHC petrol inline-six. The plug closes a bore left i...

Washer Bottle Filler Cap - the filler cap for the windscreen washer fluid reservoir. It closes the reservoir filler neck, sealing the washer fluid...

Trim Clip that secures interior and exterior trim panels, door finishers and mouldings to the body. The clip locates in a pre-formed panel apertur...

Sensor

Mirror Glass for the left-hand exterior rear view mirror, part of the Exterior Mirror Assembly. The glass is renewed separately from the mirror ho...

Fuel Filter - diesel fuel filter for the 2.2L Td4 engine, fitted in the low-pressure fuel supply circuit. The filter sits between the fuel tank an...

Engine Mount Insulator is the rear lower engine mounting within the engine support system. It locates the engine to the subframe and isolates engi...

Coolant Hose Assembly - heater outlet to thermostat housing hose in the engine cooling circuit. Returns coolant from the heater matrix outlet to t...

Coolant Hose - bottom expansion tank hose in the engine cooling circuit. Runs from the lower outlet of the coolant expansion (supply) tank to the ...

Coolant Hose between the radiator and the coolant expansion tank. This is the overflow connection of the cooling system: coolant displaced from th...

Bumper Retainer Nut - a push-in retaining nut used in the front bumper, radiator grille and rear bumper assemblies. The retainer clips into a pres...

Radiator Hose - lower radiator hose in the engine cooling circuit of the 3.2L DOHC MPI petrol I6 (Si6). Carries coolant from the bottom outlet of ...

Bolt for the exhaust system front section. This fastener secures the flanged joint between the exhaust manifold and the front pipe section, holdin...

O-Ring - 15 x 3mm sealing ring used on the 3.2L DOHC petrol inline-six engine. It seals within the oil cooler and filter assembly and in the cooli...

Oil Cooler Inlet Tube - rigid oil feed tube within the oil cooler and filter assembly on the 3.2L DOHC MPI petrol inline-six. The tube carries eng...

Coolant Hose for the cooling system overflow circuit. This overflow hose connects to the coolant expansion tank, carrying coolant overflow and ret...

Anti-Roll Bar Bush for the suspension stabiliser system. This rubber insulator clamps the anti-roll bar to its mounting, locating the bar while all...

Thermostat for the engine cooling circuit of the 3.2L petrol inline-six. It regulates coolant flow between the engine and radiator, remaining clos...

Oil Separator is the crankcase ventilation (PCV) oil separator for the 2.0L 16V turbocharged petrol engine. It sits in the crankcase breather circ...

Oil Filter - engine oil filter element for the 2.2L Td4 diesel engine, supplied with its sealing ring. The element fits inside the filter housing ...

Front Brake Disc - 300 mm vented, supplied singly; two are required to do the front axle. The vented construction carries internal vanes between t...

Hose - Oil

Thermostat Housing - coolant outlet housing in the engine cooling circuit of the 2.2L Td4 diesel engine. The housing mounts to the engine and carr...

Tensioner Pulley Kit for the auxiliary drive belt on the 3.2L petrol inline-six. The spring-loaded tensioner maintains correct tension on the poly...

Oil Cooler Return Connector is a connector fitting in the engine oil cooler circuit of the 2.2L diesel engine (DW12). It joins the oil cooler retu...

Grommet - a moulded rubber grommet fitted into an aperture in the body. It lines and seals the opening, providing a finished edge and helping to k...

Flanged Nut - M10 flanged fastener. The integral flange spreads the clamping load over a wider area and resists loosening under vibration, removin...

Radiator Cap - screw-on pressure cap for the coolant expansion tank in the engine cooling system. The cap seals the expansion tank and holds the c...

Rear Reflector, Right-Hand Side - a passive reflex reflector in the rear lighting assembly. Reflects light from following vehicles to improve rear...

Oil Filter Housing Cover for the oil cooler and filter housing on the 2.2L DW12 turbo-diesel engine. The cover closes the oil filter housing, reta...

Heater Hose Inlet and Outlet Assembly for the cabin heating circuit. This complete tube assembly carries engine coolant between the engine and the...

Hose - Inlet