Range Rover L322 Parts

Hose

Oil Seal for the transfer case input shaft. Seals the input shaft where it enters the transfer case, retaining lubricant and excluding contaminant...

Ignition Coil for the AJ-V8 petrol engine. This coil is of the coil-on-plug type, fitted one per cylinder, mounting directly over the spark plug to...

Valve Cover Grommet for the AJ-V8 petrol engine. It seals the cylinder head (valve) cover where a component passes through it, preventing oil escap...

Cylinder Head Gasket for the 4.2L V8 Supercharged petrol engine, sealing the cylinder head to the cylinder block. It seals the combustion chambers...

Lower Inlet Manifold Gasket sealing the lower section of the inlet manifold assembly on the AJV8 petrol engines. It forms the joint between the lo...

Inlet Manifold Gasket sealing the inlet manifold to the cylinder head on the 4.2L V8 Supercharged petrol engine. It maintains a sealed air path at...

Gasket

Gasket A throttle housing gasket that seals the joint between the throttle body and the intake on the 4.4L V8 petrol engine. It seals the mating f...

Front Crankshaft Oil Seal for the AJV8 4.4L petrol engine, sealing the front of the crankshaft where it passes through the timing gear cover. It r...

Timing Cover Seal for the AJV8 petrol engine - a rubber seal fitted to the timing gear cover. It seals the timing gear cover against the cylinder ...

Crankshaft Oil Seal – Rear seals the rear of the crankshaft where it exits the cylinder block, retaining engine oil at the crankshaft-to-transmissi...

O-Ring A 53mm-diameter sealing O-ring for the thermostat housing in the engine cooling circuit. It seals the thermostat housing joint against cool...

Coolant Outlet Gasket for the engine cooling system, sealing the coolant outlet flange where it joins the engine on V8 applications. The gasket fo...

Bolt Mounting bolt for the power steering pump and front cover housing, and for air conditioning compressor and condenser mountings.

Supercharger Drive Belt Bracket - mounting bracket within the belt drive arrangement of the 4.2L AJ V8 supercharged petrol engine. Bolts to the fr...

Drive Belt Bracket - accessory drive bracket for the 4.4L AJ V8 EFI petrol engine (220 kW), part of the pulleys and drive belts assembly. Bolts to...

Water Outlet Connection for the 3.6L V8 TdV8 diesel engine cooling system, mounted at the thermostat housing. It carries engine coolant from the c...

Sensor - Exhaust Gas - Temperature

Radiator Hose - lower radiator hose in the engine cooling circuit of the 5.0 litre V8 petrol (AJ133) engine, naturally aspirated and supercharged. ...

Front timing cover - the lower centre cover that closes the front face of the cylinder block over the timing chain drive. It carries the crankshaf...

Exhaust Gas Temperature Sensor for the diesel particulate filter (DPF) system. Monitors exhaust gas temperature in the after-treatment section and...

Manifold Absolute Pressure (MAP) Sensor - an engine-management sensor mounted on the inlet manifold of the 4.4L DOHC DITC V8 diesel engine. The se...

Timing Chain Tensioner for the timing chain drive of the 5.0L V8 (AJ133) and 3.0L supercharged V6 petrol engines. It bears against the timing chain...

TPMS Sensor Kit for the tyre pressure monitoring system. The sensor sits inside the wheel at the valve position, measuring the tyre's internal pres...

Tyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...

Drive Belt Tensioner for the secondary (supercharger) belt drive fitted to the supercharged petrol V6 and V8 engines. It uses a spring-loaded pivot...

Upper Timing Chain for the timing drive of the M62 B44 4.4L V8 petrol engine. The upper chain runs between the intermediate sprocket and the camsh...

Oil Filter Housing Cover is the cover for the cartridge-type oil filter assembly on 3.0 GDI petrol and 5.0 AJ-V8 engines. This cover retains the r...

Ride Height Sensor for the rear axle, part of the electronic air suspension system. The sensor links the vehicle body to the rear suspension arm a...

Fuel Vapour Valve (Purge Control Valve) - electrically operated solenoid valve in the evaporative emission control (EVAP) system. It is installed ...

Water Pump for the 4.4L DOHC V8 turbo-diesel (TDV8) engine. It circulates coolant through the engine block, cylinder heads and radiator to maintain...

Timing Chain Tensioner - Lower in the timing chain drive of the AJ-V8 petrol engine (4.4L and 4.2L supercharged). It maintains correct tension on ...

Side Repeater Lamp - front side flasher lamp, part of the front exterior lighting assembly. Flashes in parallel with the front and rear direction ...

Side Repeater Lamp - front side flasher lamp, part of the front exterior lighting assembly. Flashes in parallel with the front and rear direction ...

Air Bleed Hose - small-bore hose in the engine cooling system pipes and hoses assembly. Vents air trapped at the high points of the cooling circui...

Fuel Sender and Filter forms part of the in-tank fuel delivery assembly, mounted through the fuel tank access aperture. The assembly combines the ...