Range Rover L322 Parts

Sealing Ring seals the joint between the engine oil cooler and the water pump on the AJ133 5.0L V8 and 3.0L supercharged V6 petrol engines. It mai...

O-Ring for the oil pump outlet tube, sealing the pressurised feed within the oil pump, sump and filter assembly. The outlet tube carries oil from ...

Crankshaft Position Sensor for the 4.4L V8 BMW M62 B44 petrol engine, part of the engine management sensor group. The sensor reads the toothed rel...

Crankshaft Seal & Retainer – Rear is the rear main oil seal together with its carrier plate, mounted to the rear face of the cylinder block on ...

Oil Level Sensor - electronic engine oil level sensor mounted in the wall of the sump, forming part of the engine lubrication monitoring circuit. ...

Crankshaft Position Sensor for diesel engine management, located at the cylinder block and block stiffener assembly facing the crankshaft. The sen...

Oil Level Sensor - electronic engine oil level sensor mounted in the wall of the sump, forming part of the engine lubrication monitoring circuit. ...

Rear Upper Suspension Arm, left-hand side, for the rear knuckle and suspension arm assembly. The upper arm locates the top of the rear knuckle to ...

Fuel Pump O-Ring Seal, 31mm x 2mm - the sealing ring at the fuel pump / fuel injection pump joint. This O-ring is the only seal at that joint, so ...

Crankshaft Position Sensor for engine management, mounted in the lower cylinder block and oil pan area facing the crankshaft reluctor ring. As the...

O-Ring for the oil pump outlet tube, sealing the pressurised feed within the oil pump, sump and filter assembly. The outlet tube carries oil from ...

Front Suspension Arm Bush is the compliance bush pressed into the front suspension arm where it mounts to the body structure. The bush carries the...

Fuel Pump O-Ring Seal, 31mm x 2mm - the sealing ring at the fuel pump / fuel injection pump joint. This O-ring is the only seal at that joint, so ...

Inlet Manifold Gasket - seals the inlet manifold to the cylinder head on the 5.0L V8 AJ133 naturally aspirated petrol engine. The gasket closes th...

Accessory Drive Belt - ribbed serpentine belt for the front-end accessory drive of the 5.0L naturally aspirated V8 petrol engine. Driven from the ...

Wiper Blade - Rear is the rear window wiper blade, supplied as a complete assembly. It mounts to the rear wiper arm and clears the tailgate glass ...

Accessory Drive Belt - ribbed serpentine belt for the front-end accessory drive of the 5.0L naturally aspirated V8 petrol engine. Driven from the ...

Front Brake Disc - vented rotor for the front axle, part of the front brake disc and caliper assembly. It mounts to the front hub and provides the...

Cylinder Head Gasket seals the joint between the cylinder head and the engine block on the 3.0L V6 turbo diesel engine, containing combustion press...

Front brake disc - vented, cross-drilled and grooved, for the front brake assembly. The disc runs between the caliper pads and transfers braking t...

Coolant Return Elbow Hose is a moulded 180-degree elbow within the engine cooling system pipework, forming the return connection in the coolant cir...

Exhaust Manifold Gasket - right-hand side seals the exhaust manifold against the cylinder head face on the right-hand bank of the engine. It conta...

Sensor Assembly fitted to the fuel filter housing on the 3.0L M57 D30 diesel engine, within the fuel supply circuit. It threads into the filter ho...

Exhaust Gas Temperature Sensor for diesel exhaust aftertreatment, fitted on the right-hand side of the exhaust in the front pipe and catalyst area ...

Exhaust Manifold Gasket - left-hand side seals the exhaust manifold against the cylinder head face on the left-hand bank of the engine. It contain...

Front Brake Pad Set for the front axle disc brakes, using a ceramic friction compound. The pads are clamped by the front brake calipers against the...

Cylinder Head Bolt secures the cylinder head to the engine block on V6 and V8 petrol engines. Threaded M11 x 178 mm. Twenty bolts are required per...

Tyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...

Dust Cap - bleed screw cap for the brake calliper. Pushes over the bleed screw in the calliper body to keep dirt, road salt and moisture out of th...

Tyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...

Brake Disc - Rear - Vented CDG

Front Brake Pad Set - Ceramic Friction pads for the front disc brake assembly, using a ceramic-based friction compound. The pads locate in the fro...

Ride Height Sensor - Rear reports axle-to-body displacement to the suspension control module, forming the feedback element of the self-levelling an...

Sensor - Ride Height - Air Suspension

Ride Height Sensor for the electronic air suspension system, monitoring front ride height. The sensor links to the front suspension arm and report...

Ride Height Sensor for the electronic air suspension system, monitoring rear ride height. The sensor links to the rear suspension arm and reports ...

Automatic Transmission Fluid (ATF), supplied in a 1 litre container. Specified for the automatic transmission and, where applicable, the power ste...

Automatic Transmission Fluid (ATF), supplied in a 1 litre container. Specified for the automatic transmission and, where applicable, the power ste...