Range Rover Sport L320 Parts

Manifold Absolute Pressure (MAP) Sensor - measures the pressure inside the intake manifold and supplies an engine-load signal to the engine control...

Screw and Captive Washer - a screw with a retained washer for mounting front-end body panels. Used to secure the dash panel, front fender, radiato...

Parking Brake Cable - Right-Hand Side, part of the electric parking brake system. The cable transmits the output of the electric parking brake act...

O-Ring Seal for the cylinder head cover on the AJ-V8 4.4L petrol and 4.2L supercharged petrol engines. The seal locates in the groove of the cylin...

O-Ring Seal for the cylinder head cover on the AJ-V8 4.4L petrol and 4.2L supercharged petrol engines. The seal locates in the groove of the cylin...

Bolt - M10 x 25 mm, with washer. Underbody and chassis fixing used to secure engine splash shields, heat shields and underbody protection panels t...

Bracket - Fender Mounting

Rubber Mount - isolating insulator in the suspension system. Cushions and locates suspension components against the chassis, damping vibration and...

Bracket - Mtg

Injector Refit Kit - Cylinders No.3 and No.4 supplies the parts renewed when a fuel injector is removed and refitted, within the fuel injectors and...

Heater Blend Stepper Motor is an electric actuator mounted on the heating and air-conditioning housing. It drives an air-blend flap that regulates...

Bolt

Coolant Overflow Tank for the engine cooling system, supplied with an integrated coolant level sensor. The tank is the pressurised expansion reser...

Fuel Filter Element for the 2.7L TDV6 diesel engine, fitted in the fuel supply circuit ahead of the high-pressure injection pump. The element remo...

Brake Caliper Bracket - Rear - the fixed support bracket of the rear sliding-caliper brake assembly. The bracket bolts to the rear hub carrier and...

Silicone Turbo Hose Kit for the charge-air circuit on the 3.6L TdV8 diesel. Carries pressurised air between the turbochargers, the intercooler and...

Body Mount Isolator is part of the body-to-chassis frame mounting system. It is located between the body structure and the chassis frame at one of ...

Body Mount Isolator is part of the body-to-chassis frame mounting system. It is located between the body structure and the chassis frame at one of ...

Body Mount Bracket - chassis-frame bracket forming part of the body mounting arrangement between the body and the chassis frame. The bracket is fi...

Oil Pump for the engine lubrication system. It draws oil from the sump and pressurises it through the lubrication circuit to the engine's bearings ...

Leak Detection Pump - DMTL (Diagnostic Module Tank Leakage) unit for the fuel tank evaporative emission (EVAP) system. The module sits between the...

Differential Insulator - rubber mounting bush used in the differential mounting arrangement, on both the front axle case and the rear axle. It iso...

Lockable Retainer Handle for the detachable tow bar system. It secures and locks the removable tow bar neck into the receiver, and is supplied wit...

Tow Hook Protective Cap is a cover for the towing eye aperture in the bumper. It closes off the tow hook mounting point when not in use, keeping o...

Injector Refit Kit - Cylinder No.1 supplies the parts renewed when a fuel injector is removed and refitted, within the fuel injectors and pipes ass...

Floor Pan Blanking Plug. It closes an unused aperture in the floor pan, sealing the opening against water, dust and road debris.

Lambda Sensor - Front (pre-catalyst oxygen sensor) for the exhaust and engine management system of V6 and V8 petrol engines. The sensor threads in...

Kit - Injector Refit

Lambda Sensor - Front (pre-catalyst oxygen sensor) for the exhaust and engine management system of V6 and V8 petrol engines. The sensor threads in...

Crankshaft position sensor for 3.0L V6 and 4.4L V8 diesel engines, part of the engine management sensing circuit. The sensor sits at the crankshaf...

Crankshaft position sensor for 3.0L V6 and 4.4L V8 diesel engines, part of the engine management sensing circuit. The sensor sits at the crankshaf...

Engine Mounting Support - front engine mounting support in the engine mounting assembly. Carries the front engine mounting between the engine and ...

Transmission Oil Cooler in the automatic gearbox cooling circuit. Automatic transmission fluid is routed out of the gearbox and through the cooler...

Front brake pad set for the front disc brake calipers. The pads carry the friction material that the caliper pistons clamp against the brake disc ...

Coolant Hose, Expansion Tank to Thermostat from the engine cooling system pipes and hoses assembly. It links the base of the coolant expansion tank...

Output Flange for the transfer box output shaft. It bolts to the output shaft and provides the mounting face for the propshaft, transmitting drive ...

Condenser Assembly for the air conditioning system, supplied with an integral receiver-drier. Mounted at the front of the vehicle ahead of the rad...

O Ring

O Ring

O-Ring - a sealing ring for the air conditioning refrigerant system. It seals the pipe and hose couplings in both the front and rear air condition...

Air Conditioning Receiver Dryer for the refrigerant circuit. Installed on the high-pressure side downstream of the condenser, it stores liquid refr...