Products

Door Hinge - Lower for the front door, mounted to the A-pillar to support and align the lower section of the door. Works in conjunction with the up...

Seat Belt Anchor Plate twin anchor plate for the rear seat belt assembly, of the forward-facing outer static type. The plate forms the male anchor...

Hex Nut

Flanged Clip Nut is an M6 captive nut retained in a spring-steel clip. The clip pushes onto a panel edge or into a mounting hole to hold the nut c...

Radius Arm Bush - Front is the flexible mounting bush at the front radius arm-to-chassis location. The radius arm locates the front axle longitudi...

Wheel Nut for alloy wheel fitment on Defender, Discovery 1 and Range Rover Classic. This tapered-seat wheel nut is designed for use with alloy whe...

Fuel Pipe Union Nut for the fuel delivery line. This female threaded nut draws a fuel pipe up to its mating union, clamping the pipe's flared or c...

Brake Pipe Clip - a single moulded plastic clip that secures a brake pipe to the chassis within the braking hydraulic circuit. It retains the rigi...

Suspension Bush for the rear lower link (bottom link) of the coil-sprung rear suspension. It presses into the link eye, cushioning the pivot mounti...

Upper Link Bush for the rear suspension, fitted within the top link, fulcrum and ball joint assembly. It seats in the upper (top) link to provide ...

Banjo Bolt for diesel fuel pipe connections at the fuel filter. This hollow bolt secures a banjo union to its port, allowing fuel to pass through ...

Coolant Adaptor (Reducer) - threaded adaptor in the engine oil cooler circuit at the radiator. This threaded reducer adaptor connects the engine o...

Oil Cooler Pipe for the engine oil cooling circuit on diesel engines, running between the oil cooler and the pump feed. Carries engine oil under p...

Retaining Clip used in the parking brake (handbrake) assembly and the automatic transmission gear-change linkage. The clip secures a pivot pin or ...

Fuel Tank Lock Ring secures the in-tank fuel pump and sender assembly to the top of the fuel tank. The ring locks down over the tank aperture, hold...

Bush - Stabilizer Bar Link

Radius Arm Bush mounts the front radius arm to the axle within the suspension linkage, at the axle end of the arm. The bush provides a flexible pi...

Coolant Expansion Tank Cap - pressure cap for the cooling system expansion tank, rated at 15 psi. The cap seals the expansion tank and regulates s...

Intermediate Exhaust Heat Shield - heat shield for the intermediate section of the exhaust system. It mounts between the exhaust pipework and the ...

Accelerator Cable for the Discovery 1 200TDi fuel injection system. This cable connects the accelerator pedal to the injection pump, transmitting ...

Hose - Radiator

Engine Mounting Bracket - Left Hand for the 2.5L 4-cylinder TDi diesel engine. The bracket bolts to the left-hand side of the engine block and car...

Bracket - Support

Rear Bumper Assembly for the Discovery 1. This is the complete rear bumper unit, fitted to Discovery 1 vehicles built up to (V)LA series. It mount...

Clevis pin GENUINE LR, 20mm long

Coolant Expansion Tank in black, part of the engine cooling system. The tank serves as the system's pressurised reservoir and fill point, accommod...

Coolant Hose - Expansion Tank Vent is the bleed hose in the engine cooling system, connecting the radiator bleed outlet to the coolant expansion ta...

Water Pump for the 300 Tdi 2.5L turbo diesel engine cooling circuit. The pump bolts to the engine front cover and circulates coolant through the cy...

Voltage Sensitive Switch - a 45-amp voltage-sensitive relay used in the vehicle's auxiliary charging and accessory circuits. The switch monitors s...

Cable Clip for securing and routing cables and wiring to body and chassis structures.