for Discounts / VAT
for Discounts & Correct VAT
Anti-Roll Bar Bush - Front is the mounting bush that locates the front anti-roll (stabiliser) bar to the chassis cross member. It insulates and sec...
View full detailsEvaporator for the heating, ventilation and air conditioning (HVAC) system, mounted within the heater assembly (main unit). Refrigerant expands and...
View full detailsCamshaft Inlet - TDV6 - LH
Camshaft - exhaust camshaft for the left-hand cylinder bank of the 3.0L TDV6 turbocharged diesel V6. Mounted in the cylinder head, it operates the ...
View full detailsExhaust Camshaft for the right-hand cylinder head of the 3.0L TDV6 diesel engine. Operating within the double overhead camshaft valvetrain, this c...
View full detailsInner Track Rod Ball Joint is the inboard steering joint that connects the steering rack to the track rod. With an M16 thread, it threads into the...
View full detailsInner Track Rod Ball Joint is the inboard steering joint that connects the steering rack to the track rod. With an M16 thread, it threads into the...
View full detailsSteering Gear Connecting Rod is a steering linkage rod connecting the steering gear to the wheel-end steering arm. It transfers steering movement ...
View full detailsSteering Rack Gaiter Kit
Pipe - Fuel
Hex Head Bolt securing the timing belt idler pulley at the lower timing gear of the 3.0L V6 diesel engine. This is a single fixing bolt for the id...
View full detailsEGT Sensor is an exhaust gas temperature sensor in the exhaust sensors and modules group. It monitors exhaust gas temperature at the front positio...
View full detailsExhaust Gas Temperature Sensor for the exhaust after-treatment system of the 3.0L V6 diesel engine, fitted at the centre (middle) position. It mon...
View full detailsEGT Sensor is an exhaust gas temperature sensor in the exhaust sensors and modules group. It monitors exhaust gas temperature at the rear position...
View full detailsEGT Sensor Exhaust gas temperature sensor in the exhaust and emissions aftertreatment system of the 3.0L V6 diesel engine. It measures exhaust gas...
View full detailsGasket - Turbocharger Cooling
Lambda Sensor installed in the exhaust system to measure the residual oxygen content of the exhaust gas. The sensor signal is used by the engine c...
View full detailsCoolant Temperature Sensor mounted in the cylinder head, measuring engine coolant temperature. The sensor provides the temperature signal used by ...
View full detailsEGR Tube Clamp used in the exhaust gas recirculation (EGR) system to secure the EGR tube connection. For 3.0L V6 diesel applications.
EGR Valve for the exhaust gas recirculation system, mounted on the right-hand side and fed from the exhaust manifold. The valve meters the flow of...
View full detailsDrive Shaft - Front - RH transmits drive from the front differential output to the right-hand front wheel hub, forming part of the front four-wheel...
View full detailsFront Drive Shaft for the left-hand (LH) side of the front axle drivetrain. The driveshaft transmits drive from the front differential to the fron...
View full detailsTransmission Oil Pan for the ZF 8HP eight-speed automatic transmission. It bolts to the underside of the transmission case and retains the automati...
View full detailsTransmission Oil Pan and Filter for the ZF 8HP 8-speed automatic transmission (8HP45 and 8HP70, and the later 8HP51/8HP76 variants). The pan bolts...
View full detailsWater Pump for the 3.0L supercharged V6 and 5.0L V8 petrol (AJ133) engines. The pump circulates coolant through the engine block, cylinder heads a...
View full detailsCrankshaft Pulley for the 3.0L V6 diesel engine. The crankshaft pulley (torsional vibration damper) bolts to the front of the crankshaft and drive...
View full detailsTiming Chain Bolt, M12 x 1.5 x 40mm, for the 3.0L V6 diesel engine. This bolt secures components of the timing chain drive at the front of the eng...
View full detailsKit for the fuel injection pump drive system within the engine front timing drive assembly. It operates as part of the auxiliary timing arrangeme...
View full detailsEGR Valve for the exhaust gas recirculation system of the 3.0L V6 diesel (Gen2) engine, left-hand bank. The valve meters a portion of exhaust gas ...
View full detailsTyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...
View full detailsTyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...
View full detailsDrive Belt for the front engine accessory drive. The multi-ribbed belt transmits drive from the crankshaft pulley to the engine ancillaries. For 3...
View full detailsMass Air Flow (MAF) Sensor for the engine air intake system. Installed in the intake tract downstream of the air filter, the sensor measures the m...
View full detailsTurbocharger Gasket for the exhaust turbocharger joint, sealing the turbine outlet to the exhaust front pipe. The gasket maintains a gas-tight sea...
View full detailsTurbocharger Gasket for the exhaust turbocharger joint, sealing the turbine outlet to the exhaust front pipe. The gasket maintains a gas-tight sea...
View full detailsDiesel Exhaust Fluid (AdBlue) is a consumable fluid for the Selective Catalytic Reduction (SCR) exhaust aftertreatment system on diesel engines. I...
View full detailsCrossover Pipe Gasket for the exhaust system, sealing the joint between the exhaust crossover pipe and the exhaust manifold. On the 3.0L V6 (Gen2 ...
View full detailsCrossover Pipe Gasket for the exhaust system, sealing the joint between the exhaust crossover pipe and the exhaust manifold. On the 3.0L V6 (Gen2 ...
View full detailsCrankshaft Gear in the engine timing drive of the supercharged petrol V6 and V8 engines. Mounted on the nose of the crankshaft, it drives the timi...
View full detailsBrake Light Switch mounted at the brake pedal within the stop-lamp circuit. The switch detects brake pedal application and triggers the rear brake...
View full detailsBrake Light Switch mounted at the brake pedal within the stop-lamp circuit. The switch detects brake pedal application and triggers the rear brake...
View full detailsBolt
Alternator for the engine charging system. Driven by the auxiliary drive belt, it generates the electrical power that charges the battery and suppl...
View full detailsCylinder Head Gasket for the 2.0L I4 diesel (AJ200) engine, sealing the cylinder head to the engine block. Supplied in thickness grade 1 (1.3 mm). ...
View full detailsCylinder Head Gasket for the 2.0L I4 diesel (AJ200) engine, sealing the cylinder head to the engine block. Supplied in thickness grade 2 (1.4 mm). ...
View full detailsCylinder Head Gasket seals the cylinder head to the engine block on the 2.0L Ingenium four-cylinder diesel engine (AJ200 series). It seals the com...
View full detailsCylinder Head Gasket seals the cylinder head to the engine block on the 2.0L Ingenium four-cylinder diesel engine (AJ200 series). It seals the com...
View full detailsCylinder Head Gasket for the 2.0L I4 diesel (AJ200) engine, sealing the cylinder head to the engine block. Supplied in thickness grade 4 (1.6 mm). ...
View full details