Products

oil filter OEM Hengst Fits: - Defender Puma 2.2L - Defender Puma 2.4L - Discovery Sport 2.2L D 16V - Freelander2 2.2L D 16V - Range Rover Evoque 2...

Anti-Roll Bar Bush is the insulator bush that clamps the anti-roll bar into its chassis mounting bracket. It locates the bar while allowing it to ...

Turbocharger Oil Return Hose Gasket for the 2.0L Si4 TIVCT petrol turbo engine. It seals the joint at the turbocharger oil return (drain) hose, al...

Timing belt kit with water pump OEM

Fuel Injector Sealing Washer - seals the fuel injector where it seats in the cylinder head. Fitted at the base of the injector, it forms the combu...

Drive Belt Tensioner Pulley for the auxiliary (accessory) drive belt. The pulley bears against the drive belt, maintaining correct tension as the ...

Fuel Pump Support Housing Seal seals the mounting interface of the high-pressure fuel pump support housing on 2.0L Si4 petrol engines. The high-pr...

Anti-Roll Bar Bush for the suspension stabiliser (anti-roll) bar mounting. The bush clamps around the anti-roll bar where it attaches to the body,...

Parking Sensor is an ultrasonic sensor for the Park Distance Control (parking aid) system. Mounted in the bumper, it emits and receives ultrasonic...

Engine Mount Insulator for the engine support and mounting system. This rear lower insulator supports the engine on its mounting and isolates engi...

Vacuum Pump Seal - the sealing ring for the engine-mounted vacuum pump. The vacuum pump generates the vacuum used by the brake servo; this seal cl...

Radiator is the engine coolant radiator for 2.2L diesel applications. It dissipates heat from the engine coolant as it flows through the core, mai...

Door Mirror Cover - exterior housing cover for the right-hand door mirror assembly, forming the outer shell of the mirror body. Supplied primed an...

Intercooler Outlet Tube carries cooled, pressurised charge air from the intercooler outlet toward the engine intake on 2.0L turbocharged petrol app...

Seal - Power Transfer Unit

2.2L diesel 16V

Crankshaft Front Oil Seal seals the crankshaft nose at the front of the 2.2L TD4 diesel engine. It runs on the crankshaft snout where it passes th...

Pollen Filter for the cabin air intake, part of the HVAC ventilation system. It installs in the intake housing upstream of the blower motor and eva...

Camshaft is the inlet camshaft for the 2.0L 16V TiVCT turbocharged petrol engine. It operates the intake valves, running in the cylinder head and ...

Coolant Degas Hose connects the radiator to the coolant expansion tank within the engine cooling system. It carries deaeration (degas) flow from t...

Expansion Tank is the coolant expansion and overflow reservoir in the engine cooling system. It accommodates the thermal expansion of coolant, sep...

Brake Disc for the rear-axle disc brake, 300 mm diameter. The disc rotates with the wheel hub and provides the friction surface that the brake pad...

Shaft Assembly - Drive - Drive Shaft and Hub

Shaft Assembly - Drive - RH

Transmission Sleeve - an external component of the M66 six-speed manual transmission, fitted during assembly or repair of the gearbox's external fi...

Wiper Blade - RH is the right-hand front windscreen wiper blade, fitted to left-hand-drive vehicles.

Rear Wiper Blade for the tailgate wash/wipe system. It mounts to the rear wiper arm and sweeps the rear screen to clear rain and road spray for rea...

Intercooler Hose forms part of the charge-air ducting on the 2.2L TD4 single-turbo diesel engine. It carries pressurised charge air through the in...

Heater Blower Motor Resistor for the heating and air-conditioning system. It regulates the current supplied to the blower motor, setting the fan s...

Alternator Assembly - the belt-driven charging unit that supplies the vehicle's electrical system and recharges the battery while the engine runs. ...

Cylinder Head Cover Gasket for the 2.0L Petrol engine. This gasket seals the cylinder head cover to the cylinder head, containing oil within the v...

ABS Sensor for the front axle, part of the anti-lock braking and stability control system. The wheel speed sensor reads the toothed reluctor ring ...

Brake Wear Sensor Wire for the rear brake assembly. The sensor wire is routed to the rear brake pad and completes an electrical circuit that signa...

Differential and Carrier

Oil Filter Element and Seal

Oil Drain Plug for the engine oil pan (sump). Threaded into the base of the oil pan, it seals the oil drain point and is removed to drain the engi...

Bolt securing the fuel injector and high-pressure fuel pipe assembly on the engine fuel system. It clamps the injector and high-pressure pipe unio...

Turbo Gasket sealing the joint between the exhaust manifold and the turbocharger. The same gasket seals both the exhaust manifold and the turbocha...

Camshaft Sprocket is a timing-drive gear in the valve train of the 2.0L Ingenium diesel engine (AJ200D). Mounted on the end of the camshaft, it is...

Sealing Ring sealing a joint within the engine timing gear covers. This O-ring seals a connection at the timing cover assembly, maintaining oil-ti...

O-Ring for the oil filter and cooler assembly. It seals a connection within the oil cooler and filter assembly, maintaining oil-tight integrity at...

Manifold Absolute Pressure (MAP) Sensor mounted on the inlet manifold, part of the engine management system on the 2.0L 16-valve turbocharged petro...

Oil Cooler, part of the engine lubrication system. It draws heat out of the engine oil to hold oil temperature within its operating range under su...

Oil Sealing Ring - Haldex - With Nut is the input flange sealing ring and retaining nut for the Haldex rear differential coupling unit. The sealin...

Crankshaft Pulley mounts on the front of the crankshaft of the 2.0L 16V Ti-VCT turbocharged petrol engine (240PS). It transfers drive from the cra...