for Discounts / VAT
for Discounts & Correct VAT
Rear Lamp Guards - a pair of slatted steel guards fitted over the rear lamp assemblies to protect the lenses and lamp bodies from stone chips, bran...
View full detailsLocking Wheel Nut Set - a set of four keyed security nuts, one per wheel, fitted in place of a standard wheel nut to deter theft of the road wheels...
View full detailsLocking Wheel Nut Set for alloy wheels, comprising four locking nuts that replace standard wheel nuts to deter wheel theft. Thread size 16 x 1.50;...
View full detailsSpare Wheel Cover - a soft cover that fits over an externally mounted spare wheel to shield the tyre and rim from dirt, road grime, moisture and UV...
View full detailsSpare Wheel Cover fits over an externally mounted spare wheel to protect the tyre and wheel from weather, road dirt and UV exposure. This is the h...
View full detailsFuel Tank Guard - an aluminium underbody skid plate that shields the fuel tank from impact and debris during off-road use. It bolts beneath the rea...
View full detailsRear Lamp Guard fits over the rear lamp unit to protect the lens and housing from impact damage. It shields the light cluster from knocks by branc...
View full detailsRock Guards - exterior body protection that mounts along the lower sill line to shield the sill panels and lower bodywork from impact damage during...
View full detailsWing Top Protector - a treadplate panel that fits over the front wing top surface, protecting the paintwork from scratches, denting and wear during...
View full detailsRear Wing Protector - a protective panel fitted over the rear wing to shield the bodywork from scratches, denting and wear during loading and off-r...
View full detailsDifferential Guard - a wrap-around steel guard that shields the front or rear differential housing from impact and debris during off-road use. Des...
View full detailsBattery Isolator Switch - key-operated master cut-off switch for the vehicle electrical system, rated at 300A. Wired inline on the main battery le...
View full detailsCup Holder for the BA 189A centre cubby box. This is the replacement cup holder component for the current-design cubby box, providing a secured rec...
View full detailsRock Sliders
Rock guards, rock sliders (pair) galvanised. Fits Discovery 1 and Range Rover Classic (except LSE)
Brake Pad Set for the BA 2165 front disc brake conversion. These are the replacement friction pads that fit the calipers used in the conversion, cl...
View full detailsWading Kit for the drivetrain and engine breather system, extending the breather points of the axles, gearbox and engine to a higher level. Raisin...
View full detailsRear Coil Springs for the rear suspension, raising ride height by approximately 50mm over standard. Supplied as a pair. The raised height increase...
View full detailsFront Coil Springs for the front suspension, raising ride height by approximately 50mm over standard. Supplied as a pair. The raised height increa...
View full detailsRear Shock Absorber - a hydraulic damper for the rear suspension, controlling axle movement and wheel oscillation over uneven terrain. Matched to ...
View full detailsRear Coil Spring - part of the rear suspension, supporting the vehicle weight and setting ride height at the rear axle. Uprated to give a +50mm ra...
View full detailsSilicone Turbo Hose Kit - a set of reinforced silicone hoses that replace the original charge-air (boost) hoses in the turbocharger and intercooler...
View full detailsWinch Remote Control - Wireless is a 12-volt wireless remote control for operating an electric recovery winch at a distance. It drives the winch i...
View full detailsWinch Rope Retainer is a nylon webbing device that secures the winch rope to the base of the winch drum. Fitted when the rope is wound on, it reli...
View full detailsCat Parts S1 48-53
Rear Differential Guard is a bolt-on protective plate that shields the rear axle differential housing from impact and abrasion during off-road use....
View full detailsLoad Mat is a fitted rubber mat that lines the load area, protecting the original floor covering from dirt, moisture and wear. Shaped to cover thr...
View full detailsRear Rubber Mat Set is a set of drop-in footwell mats that protect the rear floor from dirt, moisture and wear. Moulded to the contour of the rear...
View full detailsSpring Retaining Plate Front coil spring retaining plate that clamps over the top of the spring at its seat, holding the spring captive so it canno...
View full detailsGear Knob is a machined aluminium knob that fits the top of the manual gear lever. It threads onto the gear lever of the LT77 five-speed manual ge...
View full detailsNAS LED Rear Lamp Kit upgrades the rear exterior lighting to LED lamps in the North American Specification (NAS) style, with coloured lenses. The ...
View full detailsWinch Remote Handset & Receiver is a wireless remote control set used to operate an electric recovery winch from a distance. It is supplied as...
View full detailsLED Driving Light - round auxiliary driving light with a 4" (100mm) diameter housing and 50W LED output. Intended for external mounting as a suppl...
View full detailsUpgrade your Land Rover Defender or Series vehicle with this complete 73mm LED Light Upgrade Kit. Designed to replace traditional incandescent lamp...
View full detailsRear Spring Pair - the two rear road springs of the coil-sprung suspension. Mounted between the rear axle and the chassis, they carry the rear loa...
View full detailsFront Coil Springs - heavy-duty road springs for the front axle, supplied as a pair. The springs seat between the front axle and the chassis sprin...
View full detailsFront Coil Springs - heavy-duty front suspension coil springs that raise ride height by approximately 45 mm over standard. The increased free leng...
View full detailsPortable Refrigerator is a 50-litre wheeled unit for overland travel and touring, keeping food and temperature-sensitive supplies chilled away from...
View full detailsHeadlamp Assembly - a complete halogen headlamp unit for the front lighting. Supplied with the right-hand-drive beam pattern, and without the wiri...
View full detailsFuel Cut-Off Switch Fuel stop solenoid switch mounted on the diesel injection pump, controlling fuel flow into the pump's metering circuit. When d...
View full detailsSteering Box Oil Seal Oil seal for the input (worm) shaft of the manual, non-power (Gemmer) steering box, sealing around the shaft where it enters ...
View full detailsAlternator Bearing for the vehicle charging system. This bearing supports the alternator rotor shaft, allowing it to spin freely within the altern...
View full detailsShim hinge
Window Channel Shim fits within the front door glass and regulator assembly, packing the window channel to set the glass run position and take up c...
View full detailsStarter Pinion End Bush supports the armature shaft at the pinion (drive) end of the Lucas M418G starter motor. It seats in the pinion-end bracket...
View full detailsVoltage Regulator (control box) of the screw-terminal type, for dynamo charging systems. The control box is wired between the dynamo and the batte...
View full detailsSide Steps are an exterior bolt-on accessory fitted along the lower body beneath the door openings. They provide a raised tread to ease entry and ...
View full detailsBracket