Products

Heater Return Hose for the heater coolant circuit of the 4.4L V8 petrol engine. The hose carries coolant on the return side of the heater matrix, r...

Bleed screw closing a threaded vent port in the coolant and exhaust gas recirculation circuits. Opening the screw releases air trapped at a high p...

O-Ring, 76.5mm, used in the engine cooling circuit to seal the coolant pump (water pump) and thermostat housing joints. The O-ring maintains a lea...

Water Pump Gasket seals the coolant pump (water pump) to its mounting face within the engine cooling circuit. The gasket forms a leak-tight joint ...

Air Filter for the engine air intake system. The element installs in the air cleaner housing and traps airborne dust and debris from the incoming a...

Mass Air Flow Sensor - air mass meter fitted in the induction tract as part of the engine management system. The sensor sits in the intake ducting...

Intercooler Hose - left-hand upper hose in the charge air (intercooler) circuit of the 3.6L V8 32V DOHC turbo diesel (Lion TDV8). It carries press...

Intercooler Hose - Upper, Right-Hand for the charge-air (boost) circuit of the 3.6L V8 32V DOHC diesel engine. This is the upper hose on the right...

Belt Tensioner - 4.4 V8 AJ is the automatic tensioner of the accessory (auxiliary) drive belt system, holding the correct running tension on the pr...

Belt Tensioner - 4.4 V8 AJ is the automatic tensioner of the accessory (auxiliary) drive belt system, holding the correct running tension on the pr...

Belt Tensioner for the auxiliary (accessory) drive belt system. The spring-loaded tensioner arm and pulley maintain the correct tension on the ser...

Belt Tensioner Pulley for the upper primary position of the auxiliary drive belt on AJ-V8 engines, covering the 4.4L V8 and 4.2L V8 Supercharged va...

Primary Drive Belt for the auxiliary drive system of the 4.4L AJ-V8 petrol and 4.2L supercharged V8 engines. The primary belt runs from the cranks...

Belt Tensioner for the ancillary (accessory) drive belt system. This automatic, self-adjusting tensioner maintains the correct tension on the drive...

Drive Belt Bracket - accessory drive bracket for the 4.4L AJ V8 EFI petrol engine (220 kW), part of the pulleys and drive belts assembly. Bolts to...

Supercharger Drive Belt Bracket - mounting bracket within the belt drive arrangement of the 4.2L AJ V8 supercharged petrol engine. Bolts to the fr...

Plastic Rivet from the engine cooling assembly, used to retain the radiator and the coolant overflow container. The rivet is a push-fit fastener: ...

Air Cleaner Ring for the Range Rover L322 intake assembly. This sealing ring fits within the air cleaner housing on the BMW M62 B44 4.4-litre V8 p...

O-Ring for the engine coolant water manifold, sealing the manifold joint in the cooling circuit of the 4.4L M62 V8 petrol engine. Measuring 34.2mm...

Sealing Washer for the transmission oil cooler pipes, part of the automatic transmission cooling circuit behind the 4.4L V8 petrol engine with the ...

Power Steering Hose - Pump to Rack - the hose assembly linking the power steering pump to the rack-and-pinion steering gear. It routes the supply ...

Power Steering Reservoir Cap - the screw cap that closes the power steering fluid reservoir in the hydraulic steering circuit. It seals the reserv...

Ball Joint - Front Suspension Arm is fitted at the outer end of the upper front suspension arm, forming the pivot between the arm and the steering ...

Bush - Stabilizer Bar Link

Rear Right-Hand Ride Height Sensor within the air suspension and headlamp levelling systems. This rotary position sensor mounts to the right-hand ...

Air Suspension Reservoir for the Electronic Air Suspension (EAS) system. This pressure vessel (accumulator) stores a reserve of compressed air, en...

Air Suspension Reservoir - the pressure vessel of the Electronic Air Suspension (EAS) circuit. It stores the compressed air delivered by the suspe...

Silencer - Air Suspension Compressor - noise-attenuating silencer fitted to the Electronic Air Suspension (EAS) compressor. It fits to the compres...

Locknut for body and trim panel fixings. It seats into a pre-formed aperture in the panel to provide a captive threaded point for the screws or bo...

Clip retaining the top of the rear air spring within the rear spring and shock absorber assembly. The clip locates and secures the air spring at i...

Nut

Flanged Nut - an M14 x 1.5 nut with an integral flange, used to secure suspension fasteners. The flange spreads clamp load across the joint face a...

Suspension Bolt, M14 x 81mm, from the rear knuckle and suspension arm assembly. It secures a rear suspension arm at its knuckle mounting, passing ...

Circlip for the lower steering knuckle bush. This circlip retains the bush within the lower steering knuckle, forming part of the front axle and s...

Repair Caliper Kit

Wear Brake Pad Sensor

Handbrake Shoe Set for the mechanical parking brake, which operates inside its own dedicated drum and is independent of the hydraulic service brake...