Products

Gasket - Oil Cooler seals the engine oil cooler to its mounting face, within the Oil Cooler and Filter assembly. It maintains the integrity of the...

Camshaft Cover Gasket - LH seals the left-hand camshaft cover to the cylinder head on the AJ133 5.0L V8 petrol engine. It closes the joint around ...

Water Manifold Gasket for the engine cooling and heater circuit - it seals the water manifold tube where it leaves the cylinder block and feeds the...

O-Ring for the engine cooling system - it seals the water outlet tube at its connection to the cylinder block, alongside the thermostat housing. T...

Throttle Body and Motor - the electronic throttle assembly in the engine air intake system, mounted between the intake air ducting and the inlet ma...

Exhaust Manifold Gasket - right-hand side seals the exhaust manifold against the cylinder head face on the right-hand bank of the engine. It conta...

Exhaust Manifold Gasket - left-hand side seals the exhaust manifold against the cylinder head face on the left-hand bank of the engine. It contain...

Inlet Valve - cylinder head inlet (induction) valve for the 5.0L V8 AJ133 supercharged petrol engine. The inlet valve admits the intake charge int...

Crankcase Breather Tube - a hose in the crankcase emission control (crankcase ventilation) system on petrol engines. The tube routes blow-by gases...

Inlet Manifold Gasket - seals the inlet manifold to the cylinder head on the 5.0L V8 AJ133 naturally aspirated petrol engine. The gasket closes th...

Cam Cover Gasket for the right-hand cylinder head of the 5.0L AJ133 V8 petrol engine, part of the camshaft cover assembly. The gasket seals the jo...

Heater Hose forming part of the engine cooling system pipework on the 5.0L AJ133 V8 petrol engine, both naturally aspirated and supercharged. It c...

Pin, 6 x 36mm, from the timing gear and auxiliary drive assembly of the 5.0L AJ133 V8 petrol engine. It serves as the guide pin for the auxiliary ...

Screw, M6 x 38mm, from the timing gear assembly - timing chains, tensioners and guides, and the auxiliary drive. It retains the chain guide in pos...

O-Ring for the oil pump inlet tube, part of the oil pump, sump and filter assembly. It seals the joint at the oil pump inlet (pick-up) tube, keepi...

O-Ring for the oil pump outlet tube, sealing the pressurised feed within the oil pump, sump and filter assembly. The outlet tube carries oil from ...

Rear Crankshaft Seal and Retainer - the rear main oil seal supplied complete with its retainer housing, sealing the crankcase at the transmission e...

Spark Plug Aperture Gasket for the right-hand camshaft cover, sealing the spark plug well against oil ingress. The camshaft cover carries a tube f...

Oil Filter - the replaceable cartridge element for the engine lubrication circuit, fitted inside the filter housing on the oil pump, cooler and fil...

Pulley - Fan

Secondary Drive Belt from the front end accessory drive, 1444 mm in length and eight-ribbed. It runs from the crankshaft pulley over the tensioner...

Intercooler to Inlet Manifold Gasket from the charge air induction system of the supercharged 5.0L V8 petrol engine (AJ133). The supercharger and ...

Valve Cover Screw and Sleeve from the cylinder head cover fixings of the petrol V8 and supercharged V6 engines. The screw secures the camshaft (va...

Valve Cover Stud and Sleeve from the cylinder head cover fixings of the petrol V8 and supercharged V6 engines. The stud threads into the cylinder ...

Coolant Hose from the engine cooling circuit of the naturally aspirated 5.0L V8 petrol engine (AJ133). This is the upper hose in the engine-to-rad...

Coolant Hose for the expansion reservoir overflow line on the supercharged 5.0L V8 petrol engine (AJ133). It connects to the coolant expansion res...

Coolant Hose - Bleed is part of the engine cooling and coolant recovery circuit on the 5.0 litre V8 petrol (AJ133) engine. The bleed hose carries ...

Radiator Hose - lower radiator hose in the engine cooling circuit of the 5.0 litre V8 petrol (AJ133) engine, naturally aspirated and supercharged. ...

Timing Tensioner Screw - M8 x 45mm is the fastener that secures the chain tensioner within the timing gear assembly of the 5.0 litre V8 petrol (AJ1...

Inlet Manifold Gasket - 5.0 V8 - RH seals the inlet manifold to the cylinder head on the right-hand bank of the 5.0 litre V8 petrol (AJ133) engine,...

Inlet Manifold Gasket for the left-hand cylinder bank of the 5.0 litre V8 petrol engine (AJ133). It seals the joint between the inlet manifold and ...

Cable - Hood Control

Vacuum Hose running from the inlet manifold to the symposer on supercharged petrol engines. The symposer is an intake resonator that channels indu...

O-Ring seals the variable valve timing (VVT) solenoid within the timing gear and sprocket assembly. It maintains an oil-tight joint between the VV...

Front timing cover - the lower centre cover that closes the front face of the cylinder block over the timing chain drive. It carries the crankshaf...

Tube - Drain

Rear wiper arm with integrated washer jet, part of the tailgate wash/wipe system. The arm mounts on the splined rear wiper motor spindle and carri...

Lower chain guide for the auxiliary drive chain, part of the timing gear assembly on the 5.0L V8 petrol engine (AJ133). The guide runs against the...

Fuel pressure sensor for the high-pressure direct injection circuit of the 5.0L V8 petrol engine (AJ133), naturally aspirated and supercharged. Mo...

Oil Level Sensor - electronic engine oil level sensor mounted in the wall of the sump, forming part of the engine lubrication monitoring circuit. ...

Accessory Drive Belt - ribbed serpentine belt for the front-end accessory drive of the 5.0L naturally aspirated V8 petrol engine. Driven from the ...

Vacuum Pump Seal - sealing ring between the engine-driven vacuum pump and its mounting face on the engine, forming part of the brake servo vacuum c...

Fuel Injector Seal - Upper - sealing ring for the upper position on the fuel injector, part of the fuel injectors and pipes group on the V8 petrol ...

Door Latch - Front - LH - latch assembly for the left-hand front door, mounted in the shut face of the door and working against the striker on the ...

Fuel Injector Seal - Lower is the lower sealing ring fitted to the fuel injector, within the fuel injector and pipe assembly of the 4.4L V8 (AJ) pe...