Genuine Land Rover Parts

Intercooler Hose - To Inlet Manifold for the 200TDi 2.5L turbocharged diesel engine intercooler circuit. This hose connects the intercooler outlet...

O-Ring - Oil Pump Housing Seal is the sealing O-ring fitted within the oil pump housing on the 200TDi 2.5L 4-cylinder turbo diesel engine. The O-r...

Torx Pan-Head Screw, M5 x 25. Secures the radiator grille and rear end door casing trim.

Tube Wiper

Locking Nut used to secure the facia moulding. The self-locking nut resists loosening under vibration, retaining the facia panel fixing.

Filler Strip for the fixed side window aperture, part of the body glazing assembly. The strip fills and finishes the gap around the fixed side win...

Needle Valve Kit Float-chamber needle valve and seat for the Zenith Stromberg 175CD carburettor, fitted to the 3.5L V8 petrol engine. The needle v...

Bolt Exhaust manifold fixing bolt, 5/8" UNC x 5-1/2", for the 3.5L V8 petrol engine. Secures the exhaust manifold to the cylinder head within the ...

Self-Tapping Screw securing the heater assembly within the HVAC housing on diesel applications. This screw forms part of the heater box fixing har...

pipe clip 1/2" (12.7mm) for 3/8" (9.5mm) hole

Differential Shim - 0.072in, for the Rover-type differential. Fitted during differential setup to set bearing preload and gear alignment. Shim thi...

Hose Clip Spring is the spring connector clip for the heater demister and air outlet pipes. Retains the demister ducting and outlet flaps within t...

Inlet Air Seal for the Solex carburettor connection on the 2.25L 4-cylinder petrol induction system. Seals the joint between the air intake and th...

Outer Door Handle is the external grab handle for the right-hand door, part of the door latch mechanism group. Mounted on the outer door skin, the...

Door Lock Cover Plate Seal for the rear-end door latch assembly. The gasket seals the lock cover plate against the door, keeping water and dust ou...

Pipe

Defender 110 Decal - black, approximately 26cm length. Self-adhesive black Defender 110 model identification decal from the Defender transfers and...

Front Side Lamp forms part of the exterior lighting system, providing front position and side marker illumination. Mounted at the front of the veh...

ECU - One-Touch Rear Fog Lamp is the control module for the one-touch rear fog lamp function in the exterior lighting circuit. The unit takes a mo...

Heated Seat Switch for the left-hand seat, part of the interior seat-heating control circuit. The switch uses a push-push (latching) action and mo...

Washer Switch Assembly mounted in the instrument panel facia, this push-type switch activates the windscreen washer pump circuit, supplying washer ...

Speed Sensor for the transfer gearbox speedometer drive. This 2-pin inductive sensor reads a toothed reluctor on the transfer box output, generatin...

Brake Light Switch

Rear Fog Lamp is part of the rear lighting assembly, mounted at the rear of the vehicle. The lamp produces a high-intensity red light to improve t...

EGR Valve 300 TDi

Rubber Floor Mat Set - Front for the front footwells, supplied as a matching pair. The mats are moulded in rubber to protect the front floor area a...

Magnetic Drain Plug - R380 5-Speed Manual Gearbox. The drain plug incorporates a permanent magnet that attracts and retains ferrous metal particle...

3rd Speed Gear for the R380 five-speed manual gearbox, cut with 27 teeth. The gear sits on the mainshaft within the R380 constant-mesh gear cluste...

upper Tube clutch pipe GENUINE LR - LHD Defender TD5/PUMA

Wastegate Actuator Pneumatic actuator that regulates turbocharger boost pressure on the 2.5L 200TDi turbo diesel engine. Mounted on the turbocharg...

Spare Wheel Cover - a padded vinyl cover that fits over an externally mounted spare wheel to protect the wheel and tyre from weather and dirt. Size...

Protector Lamp