Genuine Land Rover Parts

Thermostat Housing Gasket for the 2.7L TDV6 diesel engine. This gasket seals the thermostat housing (water outlet) to the engine, preventing coola...

Oil Separator Seal - sealing gasket for the oil separator in the crankcase ventilation system of the 2.7 and 3.0 litre V6 diesel engines. The oil ...

Thermostat O-Ring for the TDV6 diesel engine. This O-ring provides the coolant seal at the thermostat housing on TDV6 diesel engines, preventing c...

EGR Outlet Pipe Gasket seals the joint between the EGR outlet pipe and the intake system on the 2.7L TDV6 diesel engine (Lion V6). It sits where r...

Exhaust Gasket for the TDV6 2.7L V6 diesel engine. Seals the joint between the exhaust manifold and the cylinder head, preventing exhaust gas leaka...

Oil Tube Gasket seals the turbocharger oil drain (return) pipe where it joins the engine, within the turbocharger lubrication circuit. After lubri...

Camshaft Pulley Hub mounts to the front of the right-hand (RH) cylinder bank camshaft on the 2.7L and 3.0L V6 diesel engine, forming part of the ti...

Crankshaft Oil Seal is the front main oil seal that seals the nose of the crankshaft where it passes through the timing cover on the 4.0L V6 petrol...

Timing Chain & Tensioner Kit - Upper

Coolant Connecting Tube - rigid coolant transfer pipe located at the thermostat housing within the engine cooling system of the 2.7L TDV6 diesel en...

Bolt - Exhaust Manifold & EGR - a fixing bolt used in the exhaust manifold and exhaust gas recirculation (EGR) assembly of the TDV6/TDV8 diesel...

Clamp - Tube

Camshaft Seal for the TDV6 2.7L V6 diesel engine. Seals the camshaft at its exit point from the cylinder head, preventing oil leakage from the cams...

Kit - Drive Belt

Valve Stem Seal for the cylinder head valvetrain on TDV6 and TDV8 diesel engines. Fitted to both inlet and exhaust valves, the seal presses onto th...

Key

Valve Stem Seal for the cylinder head valve train, fitting over the valve stem at the top of the valve guide. The seal meters lubrication down the...

Oil Pan Gasket for the engine lubrication system, sealing the oil pan (sump) to the underside of the cylinder block. The gasket forms the oil-tigh...

Interior Trim Kit in an aluminium finish that dresses the centre console area of the cabin. The self-adhesive trim pieces apply directly over the ...

Front Wheel Arch Moulding - LH - Primed is the left-hand front wheel arch moulding, a plastic trim fitted around the front wheel arch as part of th...

Front Wheel Arch Moulding - RH - Primed is the right-hand front wheel arch moulding, a plastic trim fitted around the front wheel arch as part of t...

Rear Wheel Arch Moulding - RH - Primed is the right-hand rear wheel arch moulding, a plastic trim fitted around the rear wheel arch as part of the ...

Oil Filter for the engine lubrication system of the 4.4L V8 petrol (EFI) and 4.2L V8 supercharged petrol engines. The filter removes wear particle...

Oil Filter for the 2.7L TDV6 diesel engine, part of the engine lubrication circuit. A paper-element filter that removes wear particles and contami...

Hub Nut - M24 x 2.0 for wheel hub and bearing retention. This M24 x 2.0 metric hub nut secures the wheel hub or halfshaft flange onto the stub axl...

Vacuum Hose and Valve assembly for the brake servo (booster) vacuum circuit, connecting the engine vacuum pump to the servo inlet. Hose and valve a...

Housing Rear Axle Lion Diesel 2.7 V6

Rear Seat Back Adjusting Handle - the release lever on the rear seat frame assembly. The handle operates the seat back latch, releasing the backre...

Front Flasher Bulb for the front direction indicator lamp, wedge base. The bulb provides the front turn-signal (flasher) illumination.

Screw - an M6 x 20 mm pan-head setscrew with a Torx drive, used as a general multi-application fastener. The Torx socket gives positive tool engag...

Tow Hook Protective Cap is a cover for the towing eye aperture in the bumper. It closes off the tow hook mounting point when not in use, keeping o...

Mirror Glass - RH is the replacement reflective glass for the right-hand exterior rear-view door mirror. It seats within the door mirror housing a...

Fuel Return Tube for the 2.7L TDV6 diesel engine. This tube forms part of the fuel return circuit, routing excess fuel from the injectors or fuel ...

Washer Switch Assembly mounted in the instrument panel facia, this push-type switch activates the windscreen washer pump circuit, supplying washer ...

Front Bumper Wiring Harness, part of the body and bumper electrical loom. This harness routes through the front bumper and supplies both the front...

Parking Aid Sensor - ultrasonic transducer for the Parking Distance Control (PDC) system, mounted through the rear bumper cover. Straight-bodied ty...

Retainer Clip for the headlamp and front end carrier assembly, quarter-turn type. The clip locks with a quarter turn to secure the headlamp and fr...

Rear Bumper Reflector, left-hand side - a passive (non-illuminated) retroreflector set into the rear bumper. It reflects the headlamps of followin...